The light beige Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the FJ400 autodump when reducing power setting?

A: Yes, it auto dumps.

Q: 2. How many lumens does the FJ400 produce?

A: The Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) is a strobe/flash. They are not rated in Lumens like continuous lights. It is rated and watts and is 400 watts.

Q: 3. Will my Canon ST-E3-RT Speedlite Transmitter & Yongnuo YN-E3-RT II Wireless Speedlite Transmitter for Canon, trigger the lights as well as increase or decrease power?

A: The Canon ST-E3-RT will allow you do adjust power and flash the FJ400 strobes, however the Yongnuo will not.

Q: 4. Does the usb-c port on the unit power the light?

A: The USB-C port on the FJ 400 is for firmware updates and is not used for power.

Q: 5. Will it work with Canon 5d Mark III?

A: Yes it will.

Q: 6. Is this a bowens mount?

A: why is this never included in the product description?

Q: 7. How can I get these triggered off my Pocket Wizards?

A: The FJ400 can be used with Pocket Wizards by plugging your receiver into the sync port on the bottom of the FJ400, and triggering it from your Pocket Wizard transmitter.

Q: 8. Do i need to buy the wireless trigger to use it with my d800?

A: The FJ400 can be triggered optically from an on camera flash or via a sync cord or an alternative trigger that offers a 3.5mm male plug to attach to the 3.5 input jack. Only Manual operation is available without the FJ-X2m trigger or a Canon RT system flash or trigger. No TTL or HSS or other advanced functions without a Westcott FJ-X2m or Canon RT trigger.

Q: 9. how far behind are these two light kits

A: i think Mike means, how far behind in technology are these lights.

Q: 10. Comparing this to the Godox AD400Pro, the Godox has a power output range from 1/256 to 1/1. I see a YouTube video comparing the 2 of these but how the Wescott only goes as low as 1/64 but later fixed with s as firmware update. So what is the new power output range of the Wescott? Thank you

A: The power output on the FJ400 after that firmware change can go to as low as 1.56 watt seconds at its lowest power. 1.56ws is the equivalent of 1/256 power. The entire range of the FJ400 is from 1.56ws-400ws or 1/256-1/1.