The light beige Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 6-pin Hirose Connector for Samson Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work out of the box with Sony A7R4?

A: Due to the fact that Sony's current mirrorless digital cameras (such as the Sony Alpha a7R IV Mirrorless Digital Camera) use their Multi-Interface hot shoe that is slightly different from the standard ISO hot shoe design, you would need to purchase the Westcott Sony Adapter for FJ-X2m Flash Trigger, B&H # WEFJX2MSA, to use the included Westcott FJ-X2m Universal Flash Trigger with your camera. That would be the only additional accessory needed for compatibility with Sony Multi-Interface hot shoe cameras.

Q: 2. What sort of adapter is needed for Sony compatibility?

A: The Westcott Sony Adapter for FJ-X2m Flash Trigger can be purchased seperately (Westcott part #4711) or you can buy the trigger and sony adapter together (Westcott part #4706)

Q: 3. Does this come with an adapter for the sony wireless trigger?

A: Hi Aaron, The Westcott Sony Adapter for the flash trigger is not included in the kit. Here is the link to the adapter: https://www.bhphotovideo.com/c/product/1508117-REG/westcott_4711_fj_x2m_sony_adapter.html

Q: 4. Will it work with Canon 5d Mark III?

A: Yes it will.

Q: 5. Are these weather resistant?

A: No, these lights are not weather resistant.

Q: 6. Do i need to buy the wireless trigger to use it with my d800?

A: The FJ400 can be triggered optically from an on camera flash or via a sync cord or an alternative trigger that offers a 3.5mm male plug to attach to the 3.5 input jack. Only Manual operation is available without the FJ-X2m trigger or a Canon RT system flash or trigger. No TTL or HSS or other advanced functions without a Westcott FJ-X2m or Canon RT trigger.

Q: 7. can i connect this stobes lights to a electric wall if im not outside shooting to save from using the battery?

A: Yes you can. The strobe is AC/DC and will even charge your battery while connected to mains (wall) power.

Q: 8. Is this product compatible with Sony A7R III

A: Yes it is. Enjoy.

Q: 9. What is the CRI on the westcott fj400?

A: Unfortunately, Westcott does not publish a CRI rating for the LED modeling lamp, but both this lamp and the flash tube are rated for 5500-5600K.

Q: 10. Will the FJ400 and FJ-x2m trigger work with a Nikon D800e? There is an asterisk by this model.

A: Yes this kit is compatible with the Nikon D800E.