You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6x Omnidirectional Earset Mic, Standard Gain With Detachable 2mm Cable And 4-pin Hirose Connector For Azden Wireless Transmitters (light Beige)

Countryman E6x Omnidirectional Earset Mic, Standard Gain With Detachable 2mm Cable And 4-pin Hirose Connector For Azden Wireless Transmitters (light Beige)
  • Product Code: ga200388
  • Availability: In Stock

$1,755.00 $2,562.30

The light beige Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 4-pin Hirose Connector for Azden Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAzden: 41BT (UHF)
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x Hirose 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAzden: 41BT (UHF)
Polar PatternOmnidirectional
Included Tone/Pattern Caps+0 dB Flat, +4 dB Bright, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
Sensitivity7.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x Hirose 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorLight Beige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Are these manufactured in China?

A: Yes.

Q: 2. Does it work with the Nikon Z6II?

A: The Westcott FJ-X2m Universal Flash Trigger for FJ400 Strobe, BH # WEFJX2MUWLFT can be used with the Z6 II to trigger the FJ400.

Q: 3. Are these weather resistant?

A: No, these lights are not weather resistant.

Q: 4. Will the FJ400 and FJ-x2m trigger work with a Nikon D800e? There is an asterisk by this model.

A: Yes this kit is compatible with the Nikon D800E.

Q: 5. What is the Guide Number?

A: The Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) BH #WEFJ400S does not have a guide number. It is a 400ws flash.

Q: 6. Would MagMod's creative gel set (for their magbox) fit inside the magnetic reflector for this light and be usable?

A: The only option to allow the MagMod MagBox to attach to the FJ400 is with the MagMod MagBox Speed Ring for Bowens, B&H # MABXSPDBOW02. https://bhpho.to/30yxA5m

Q: 7. Does the Sony Adapter come with the FJ-X2m Universal Wireless Trigger in this kit?

A: No, click the link below to view the adapter; https://www.bhphotovideo.com/c/product/1508117-REG/westcott_4711_fj_x2m_sony_adapter.html

Q: 8. Can the flash duration be changed?

A: Yes it can. The t0.1 range is from 1/280-1/3000 in Normal mode and 1/280-1/7000 in Freeze mode. The t0.5 range is from 1/800-1/8500 in Normal mode and 1/800-1/19000 in Freeze mode.

Q: 9. Will this work out of the box with Sony A7R4?

A: Due to the fact that Sony's current mirrorless digital cameras (such as the Sony Alpha a7R IV Mirrorless Digital Camera) use their Multi-Interface hot shoe that is slightly different from the standard ISO hot shoe design, you would need to purchase the Westcott Sony Adapter for FJ-X2m Flash Trigger, B&H # WEFJX2MSA, to use the included Westcott FJ-X2m Universal Flash Trigger with your camera. That would be the only additional accessory needed for compatibility with Sony Multi-Interface hot shoe cameras.

Q: 10. will this work with the godox ad600 Pro and the transmitters from that family of lights?

A: The FJ400 uses a proprietary transmitter such as the Westcott FJ-X2m Universal Flash Trigger for FJ400 Strobe, B&H # WEFJX2MUWLFT and Westcott Lithium-Ion Polymer Battery for FJ400 AC/DC Strobe, B&H # WEFJ400ACDC. It is not compatible with the Godox X series triggers nor the AD600 Pro batteries. https://bhpho.to/2ATeURr https://bhpho.to/2B2K9db

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Tiffen 127mm 80a Color Conversion Filter

$1,669.50 $2,621.11

Letus35 4 X 5.65" 15mm Lws Rod-mounted Matte Box

$1,196.85 $1,759.37

Profoto C1

$447.00 $639.21