Expand your power options with the AP8867 30-Outlet Metered Zero RU 2G Rack PDU (60A, 208V) from APC. Designed to provide active metering, this power distribution unit uses an IEC-60309 60A 3P+E input connection and sports 30 IEC-320 C13 outlets. An RJ12 serial and RJ45 Base-T Ethernet port provide interfacing options, while a USB Type-A port can be used to deploy firmware upgrades via a flash drive. Network sharing ports are also present, as is a networking port for use with the optional APC Temp and Humidity Sensor. Alongside simple controls, this PDU's interface panel also includes LEDs for status conditions, including warning and overload indicators.

Users can define the alarms to suit preferred parameters for optimum circuit protection. Featuring a load capacity of 17300VA or 17200W, this PDU delivers 208V at 60A. Designed to be installed vertically on racks or enclosures, the APC AP8867 comes with mounting hardware and a serial configuration cable, and features a 6' power cord.

30 x IEC-320 C13 Outlets    1 x IEC-60309 60A 3P+E Input Connection    Base-T Ethernet & RJ12 Serial Interface    17,300VA / 17,200W Load Capacity    60A Maximum Input Current    208V Input Voltage    Remote Monitoring for Connected Loads    Active Metering    Vertically Mounts on Racks & Enclosures    6' Cord Length

Network management interfaces provide standards-based management via web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video, and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements.

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rackmount equipment. Saves time and money during installation by using one branch whip and standard connections.

Includes horizontal, vertical, and toolless mount varieties.

Related Questions and Answers

Q: 1. Where can I find the trolley pictured? Will the other options (Orca and Sachtler) work with this bag?

A: https://www.bhphotovideo.com/c/product/1115067-REG/sachtler_sa1001_snaplock_trolley_system.html/pageID/accessory The trolley is listed in the accessories on the product page.

Q: 2. Will this work with a Befree GT XPRO Carbon Tripod?

A: Yes Oben GH-30 Gimbal Head is compatible with Manfrotto Befree GT XPRO Carbon Fiber Travel Tripod

Q: 3. I heard the screw on the ball head is short. Does anyone how long it is and if it can be replaced to a longer one? I want to put it on a 100mm to Mitchell mount adapter on a Mitchell mount tripod.

A: The Sirui BCH-30 Video Head thread length is not listed by the manufacturer. It is designed for use on any tripod with a 100mm half shell.

Q: 4. Will this ball head work with Arca-Swiss universal quick release plates?

A: The Matthews BH-30 Ball Head has not been tested with all Arca style plates. But the head uses standard Arca Swiss style plates, and should work with most.

Q: 5. will this work with canon 1dx mkii and canon 400 f2.8 III?

A: Yes this head is suitable for the Canon 1DX Mark II and the Canon 400mm f/2.8L III lens.

Q: 6. How does it mount on a tripod with a 1/4" bolt?

A: If you have a 1/4" mounting screw on a tripod, you would need a 1/4" to 3/8" bushing: https://www.bhphotovideo.com/c/product/769749-REG/Oben_OB_1039_3_8_16_to_1_4_20_Reducer.html

Q: 7. Can it be converted to side mount (like Jobu)?

A: So that we may best assist you, please email us at prophoto@bhphoto.com.

Q: 8. I hope my question is not too, I guess, stupid, but I'll ask regardless and hope for the best. Can I use it, and would it work well with my Fuji GFX 100 and GFX 100S not using large zoom-type lenses? I have the GF 100mm, GF 32-64mm, and several others, but I wonder if this unit would be worth the purchase if I use these lenses? Thank you for your thoughts. Oh, and I'll be using it on a "Really Right Stuff" tripod. Again, thank you!

A: This Gimbal is definitely usable for your setup, though maybe not ideal. Gimbals are generally best suited for tracking wildlife and the like. For general use I would suggest looking at a Ball Head or a Pan and Tilt Head.

Q: 9. How can I shoot in portrait mode with a tele lens that does not have the tripod collar?

A: You would need this Wimberley M8 perpendicular plate to change the orientation of the plate from lens orientation to camera orientation. https://www.bhphotovideo.com/c/product/303253-REG/Wimberley_M_8_Module_8_M_8_Perpendicular.html?sts=pi Then you would need to use an L bracket on the camera like this to be able to place the side of the camera on gimbal. https://www.bhphotovideo.com/c/product/1714730-REG/3_legged_thing_qr11_lb2_0_qr11_2_0_universal_l_bracket.html

Q: 10. How many inches long is the quick release plate? Is a longer one available?

A: The included quick release plat is approximately 2 long. Here is a longer one. 3.6 x 1.5 x 0.5 (92 x 38 x 13 mm) Really Right Stuff L84 Multi-Use Fore-Aft Plate with 1/4 -20 Screw B&H # REL84PLATE.