The white Yamaha DZR10 is a 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D b-iamp powers the 10" woofer and 2" compression driver, which combine to provide a frequency range of 44 Hz to 20 kHz (-10 dB) with a maximum SPL of 137 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt it to the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.

The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR10 is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR10's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.

The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The Yamaha DZR10 ships with a standard IEC power cord.

For Live Stage, Theatre, DJ Setups    Designed for FOH/Main & Floor Monitor    LF: 10" and HF: 2"    Max SPL: 137 dB    Frequency Range: 44 Hz to 20 kHz (-10 dB)    Class-D Amplifier: Bi-Amp 2000W    2 x Combo XLR-1/4" Inputs + XLR Thru/Out    Built-In 96 kHz DSP with FIR Filters    D-CONTOUR Multiband Compressor

• 2-way powered loudspeaker
  • HF: 2"
  • LF: 10"
• Ideal for FOH/Main or floor monitor applications
  • Maximum SPL: 137 dB
  • Frequency range (-10 dB): 44 Hz to 20 kHz
• High-power 2000W Class-D amplifier module
• Floor-monitoring setting
• Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
• Rotatable horn
• Variety of optional U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
• Optional speaker cover available (SPCVR-DZR10)

• 96 kHz DSP processors help focus the power output of the DZR10 into high-resolution sound with super-low latency
• Yamaha's Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology, which utilizes linear phase FIR filters for the crossover network and correct EQ
• Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
• Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
• An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
• Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
• Users can easily transfer saved settings to a USB flash drive

• D-CONTOUR is an intelligent multiband compressor that ensures your DZR's sound stays consistent and clear no matter how hard you drive them
• By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
• D-CONTOUR provides settings for the FOH/Main and Monitor modes
  • FOH/Main: Boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications
  • Monitor: Optimized for floor monitoring application by taming down problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to help deliver clarity
• Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level

• DSP protection functions for maximum output and component longevity
• Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
• During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
• Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

Related Questions and Answers

Q: 1. can these muslims be dyed ?

A: Yes, the muslins in the Impact Background System Kit with 10 x 24' Black, White Muslins are 100% cotton fabric based and can be dyed.

Q: 2. I live in Australia. Can the T2 be used with a 10 amp plug and on a household circuit? Would this be ideal? Seeing as a 2K Blondie or M18 work fine on household circuits here. Thanks

A: Using Ohms law, the amperage draw for the T2 (2000W) fixture at 120V is approximately 16.6 amps. For 220V it would be approximately 9 amps. I believe Australia is a 220V country therefore it would be right on the edge with a 10 amp receptacle.

Q: 3. I just bought a 53'' by 36' backdrop paper on this site. Which stand would work best for this? help please!

A: I wouldn't ask that question here in the Airpods page. I would chat/call the B&H representative to help you.

Q: 4. I already own this kit but need to replace just one of the stands. How do I order just that?

A: The light stand included with this kit is the Impact Air-Cushioned Light Stand (Black, 10') B&H # IMLS10ABI.

Q: 5. Will this work with "Kirk Universal Tall L-Bracket" ? THANKS

A: Yes it is compatible and work with the Kirk QRLB-T Universal Quick Release Tall L-Bracket: https://bhpho.to/2UsRRHH

Q: 6. Does that fit on the Traveler GT545T?

A: Yes it does. You will be able to put this head on a tripod like B&H # GIGT0545TUS. https://bhpho.to/2ti0hEM

Q: 7. Do these background fabrics pull tight or do they stay ruffled up?

A: The backgrounds included in this Impact Background System Kit with 10x12' Black, White, Chroma Green Muslins can be pulled taught and secured with clamps such as the Bessey Steel Spring Clamp (Black, 2 1/4 x 2"), BH # BEXM5B https://bhpho.to/3gToAkB

Q: 8. What's the Kelvin temperature of this?

A: The ARRI T2 Location Fresnel light fixture is a tungsten light fixture. As the unit uses tungsten lamps, the color temperature would be 3,200K. The lamp/bulb is not included with the fixture purchase, and must be purchased separately. The compatible lamps we carry are listed under the Lamps section under the Accessories tab on our website. The ARRI CYX 2000W 120V Lamp, B&H # ARCYX, or the Sylvania / Osram CYX (2000W/120V) Lamp, B&H # SYCYX, would be good options for your usage needs.

Q: 9. I know the max for household outlets is 2000w. Does that mean I can only use one 2kw light at a time, or just one per outlet?

A: No, a 2k light should not be used in a regular household outlet which is usually 15 amp.The light needs to be used in a 20 amp circuit. And the plugs are different so not to confuse the outlet.

Q: 10. I am new to the whole studio photography concept. I want to buy a back ground kit but cannot seem to pick one. I want something affordable with some variety but good enough to practice with for a while until I can afford something better. I keep going back to this set the other one you have: Savage Accent Muslin Background Kit (10 x 12', White/Black/Green) B&H # SAASMK101WBG MFR # 012046PAS-12 There is a difference in price. What would be the main reason for the pricing difference? Is Chroma just a different material? They both seem to come with the same overall items so i can't tell what the pros and cons are for each. I am willing to buy the more expensive one as long as I know it is a better item for the price. Can you help me in deciding what would be better for my first background kit?

A: The background kits are very similar and they actually have the same specifications.With the quality of each they are also very similar. So for price I would go with the Impact brand.The green background can be used for regular photography or video but it is also good for Green screen. Chroma Key (green screen) is used when you need to replace the background with a digital background. That process is done in post after the shot is taken.