The white Yamaha DZR12 is a 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 12" woofer and 2" compression driver, which combine to provide a frequency range of 39 Hz to 20 kHz (-10 dB) with a maximum SPL of 139 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt it to the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.

The onboard 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR12 is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR12's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.

The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The Yamaha DZR12 ships with a standard IEC power cord.

For Live Stage, Theatre, DJ Setups    Designed for FOH/Main & Floor Monitors    LF: 12" and HF: 2"    Max SPL: 139 dB    Frequency Range: 39 Hz to 20 kHz (-10 dB)    Class-D Amplifier: Bi-Amp 2000W    2 x Combo XLR-1/4" Inputs + XLR Thru/Out    Built-In 96 kHz DSP with FIR Filters    D-CONTOUR Multiband Compressor

• 2-way powered loudspeaker
  • HF: 2"
  • LF: 12"
• Ideal for FOH/Main or floor monitor applications
  • Maximum SPL: 139 dB
  • Frequency range (-10 dB): 39 Hz to 20 kHz
• High-power 2000W Class-D amplifier module
• Floor monitoring setting enables mirroring configuration
• Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
• Rotatable horn
• Variety of optional U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
• Optional speaker cover available (SPCVR-DZR12)

• 96 kHz DSP processors help focus the power output of the DZR12 into high-resolution sound with super-low latency
• Yamaha's Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology which utilizes linear phase FIR filters for the crossover network and correct EQ
• Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
• Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
• An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
• Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
• Users can easily transfer saved settings to a USB flash drive

• D-CONTOUR is an intelligent multiband compressor that ensures your DZR's sound stays consistent and clear no matter how hard you drive them
• By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
• D-CONTOUR provides settings for the FOH/Main and Monitor modes
  • FOH/Main: Boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications
  • Monitor: Optimized for floor monitoring application by taming down problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to help deliver clarity
• Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level

• DSP protection functions for maximum output and component longevity
• Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
• During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
• Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

Related Questions and Answers

Q: 1. Bought 2x T2’s with 2x CYX Lamp (2000W / 120V) globes. Used on Australian house power. The globes blew straight away. My wiring had multiple continuity checks with different multimeters. All fine. No Earth leakage. Was this because the globe is 120V and Australian globes are 240? Or is there another error? I’m asking before another test. Don’t want to waste money on another globe. Thanks

A: A 120V lamp will not work with 240V power. You will need to purchase an FKK CP41 Lamp (2000W 240V). Please follow the link below leading you to my top recommendation. https://bhpho.to/2OwOYSx

Q: 2. What is the difference between Benro HD3A 3-Way and Benro HD2A 3-Way besides the load capacity?

A: Operationally the Benro HD2A and HD3A 3-Way Panheads are the same. The HD2A is slightly lighter weight, 1.7 pounds vs 2. Other than the weight, load capacity and price, there are no major differences.

Q: 3. I live in Australia. Can the T2 be used with a 10 amp plug and on a household circuit? Would this be ideal? Seeing as a 2K Blondie or M18 work fine on household circuits here. Thanks

A: Using Ohms law, the amperage draw for the T2 (2000W) fixture at 120V is approximately 16.6 amps. For 220V it would be approximately 9 amps. I believe Australia is a 220V country therefore it would be right on the edge with a 10 amp receptacle.

Q: 4. Can i use this as substitute to my Benro FSL09C? Thanks

A: Yes it can be used as a substitute for the head on the Benro FSL09C tripod.

Q: 5. i just purchased a GH1720QR. Is it compatible with a Gitzo GT2540T tripod?

A: Yes this head will be compatible on the Gitzo GT2540T Tripod.

Q: 6. Can this light be safely mounted on a truss system?

A: This light can be safely mounted on a truss system with a C-clamp like the Avenger C210 Baby Pipe Clamp, B&H # AVC210. Please see the image below for reference.

Q: 7. is there 220V lamp for this light ?

A: There is a 220v lamp available for this fixture. Please see the link to the lamp:a href= http://bhpho.to/1ABDEUK target= _blank http://bhpho.to/1ABDEUK/a

Q: 8. What is the height of the HD2A?

A: The height is 4.5".

Q: 9. Would it be possible to "perfectly" balance a 80D with EF 50mm f1.4 to a stage where I can point the camera at any direction, any tilt angle and the camera would stay precisely stationary as pointed?

A: Yes, but keep in mind that the tilt and pan parameters are as follows: -60°/90° Tilt, 360° Pan

Q: 10. Can I use it like an gimbal head ? Can I lock the horizon and just move up and down with circle move ?

A: It may be the closest head to a gimbal but you will achieve much results with a gimbal head as far as tracking and smoothness of motion.