The white Yamaha DZR15-DW is a 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 15" woofer and 2" compression driver, which combine to provide a frequency range of 34 Hz to 20 kHz (-10 dB) with a maximum SPL of 139 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt it to the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.

The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR15-DW is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR15-DW's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.

The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The DZR15-DW is equipped with an additional panel with two etherCON connectors (2-in/2-out) for interfacing with other Dante-compatible equipment such as other speakers and Yamaha's CL/QL/TF digital mixing consoles. The Yamaha DZR15-DW ships with a standard IEC power cord.

For Live Stage, Theatre, DJ Setups    Designed for FOH / Main Applications    LF: 15" and HF: 2"    Max SPL: 139 dB    Frequency Range: 34 Hz to 20 kHz (-10 dB)    Class-D Amplifier: Bi-Amp 2000W    2 x Combo XLR-1/4" Inputs + XLR Thru/Out    Built-In 96 kHz DSP with FIR Filters    D-CONTOUR Multiband Compressor

• 2-way powered loudspeaker
  • HF: 2"
  • LF: 15"
• Ideal for FOH/Main or floor monitor applications
  • Maximum SPL: 139 dB
  • Frequency Range (-10 dB): 34 Hz to 20 kHz
• High-power 2000W Class-D amplifier module
• Floor monitoring setting enables mirroring configuration
• Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
• Rotatable horn
• Variety of optional U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
• Optional speaker cover available (SPCVR-DZR15)

• 96 kHz DSP processors help focus the power output of the DZR15 into high-resolution sound with super-low latency
• Yamaha's Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology which utilizes linear phase FIR filters for the crossover network and correct EQ
• Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
• Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
• An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
• Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
• Users can easily transfer saved settings to a USB flash drive

• D-CONTOUR is an intelligent multiband compressor that ensures your DZR's sound stays consistent and clear no matter how hard you drive them
• By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
• D-CONTOUR provides settings for the FOH/Main and Monitor modes
  • FOH/Main: Boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications
  • Monitor: Optimized for floor monitoring application by taming down problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to help deliver clarity
• Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level

• DSP protection functions for maximum output and component longevity
• Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
• During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
• Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

• Dante enables smart system integration with Yamaha consoles and other Dante devices via the Dante I/O (2-in/2-out), which also features SRC (sample rate conversion) allowing 48 kHz device compatibility
• Patching is simplified considerably with Yamaha CL/QL digital mixing consoles from the I/O device display
• TF console users can select Quick Config for surprisingly fast, easy set up and operation of a sophisticated sound reinforcement system
• Combining the Analog I/O with Dante I/O, opens up flexible routing and system configuration options
• The Dante break-IN and break-OUT function add even more flexibility by acting as a simple I/O box
• Yamaha’s customizable control panel software “ProVisionare Control” for windows and “ProVisionare Touch” for iPad are also Dante compatible, adding more simple remote management of your sound reinforcement system

Related Questions and Answers

Q: 1. How does this do with other QR plates? I have several AS-style plates from different manufacturers and I'm concerned about compatability.

A: Works well with other brand AS plates.

Q: 2. Is there away to change the Base Mount thread to 1/4"?

A: Certainly! All you'll need is a 3/8"-16 reducer bushing like this one: https://bhpho.to/2WxKgYY or https://bhpho.to/34upiOY

Q: 3. What's the Kelvin temperature of this?

A: The ARRI T2 Location Fresnel light fixture is a tungsten light fixture. As the unit uses tungsten lamps, the color temperature would be 3,200K. The lamp/bulb is not included with the fixture purchase, and must be purchased separately. The compatible lamps we carry are listed under the Lamps section under the Accessories tab on our website. The ARRI CYX 2000W 120V Lamp, B&H # ARCYX, or the Sylvania / Osram CYX (2000W/120V) Lamp, B&H # SYCYX, would be good options for your usage needs.

Q: 4. Will this work with "Kirk Universal Tall L-Bracket" ? THANKS

A: Yes it is compatible and work with the Kirk QRLB-T Universal Quick Release Tall L-Bracket: https://bhpho.to/2UsRRHH

Q: 5. plus/minus 110 degrees? Is that 220 degrees of motion, or really just +55, -55 ( etc)??

A: i looked at mine last night -- horizontally 360 degrees and vertically 180 degrees (full range of motion not 1/2) -- not sure where the 110% comes from.Mike

Q: 6. Can this light be safely mounted on a truss system?

A: This light can be safely mounted on a truss system with a C-clamp like the Avenger C210 Baby Pipe Clamp, B&H # AVC210. Please see the image below for reference.

Q: 7. What is the best Gitzo travel tripod for this head? Heaviest use will be Nikon D850 and 80-400 lens.

A: The Gitzo GIGT0545T Traveler Series 0 Carbon Fiber Tripod will be the best tripod for your setup. This tripod holds up to 22 pounds.

Q: 8. What is the height of the HD2A?

A: The height is 4.5".

Q: 9. Does that fit on the Traveler GT545T?

A: Yes it does. You will be able to put this head on a tripod like B&H # GIGT0545TUS. https://bhpho.to/2ti0hEM

Q: 10. Can I use it like an gimbal head ? Can I lock the horizon and just move up and down with circle move ?

A: It may be the closest head to a gimbal but you will achieve much results with a gimbal head as far as tracking and smoothness of motion.