Keep critical components powered on and backed up with the Smart-UPS Li-Ion Short-Depth 1000VA, 120V Uninterruptible Power Supply with SmartConnect. Providing six NEMA 5-15R outlets, this UPS utilizes a 5-15P power connection and features single USB Type-A and serial RJ45 communication ports. Providing 1000VA at 120V, this uninterruptible power supply sports an integrated LCD interface to monitor performance or check visual indicators. Audible alarms can also be used to monitor the status of power supply, notifying you of changes to UPS and utility power conditions.

Featuring hot-swappable user-replaceable batteries, this Smart-UPS allows for easy switching when a battery is depleting, ensuring limited downtime. Cold-start capable, it can provide temporary battery power if utility power is lost. Furthermore, half of the receptacles belong to a single switched outlet group, facilitating discrete control over rebooting hung devices, sequenced power cycling, or load shedding. Thanks to integrated SmartConnect support, users can remotely control the UPS. Or, take advantage of SmartSlot compatibility to install various adapter cards, expanding management options. This APC Smart-UPS unit features a short depth and a 2 RU form factor, allowing for easy installation in server racks.

6 x NEMA 5-15R Outlets    1 x NEMA 5-15P Power Connection    USB & Serial RJ45 Communication Ports    LCD Interface    Audible Alarms    Hot-Swappable & User-Replaceable Battery    Cold Start Capable    Single Switched Outlet Group    SmartSlot Compatible    2 RU Form Factor

Provides temporary battery power when the utility power is out.

Provides actual kilowatt hours of usage for energy-conscious users.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Reduces utility costs, generates less heat.

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy-to-use navigation keys.

Lithium-ion batteries provide twice the service life of a typical lead acid battery and are small, light, and environmentally friendly.

Dynamically provides the month and year when battery replacement is recommended to aid in long-term maintenance planning.

Simulates utility power to provide the highest degree of compatibility for active PFC or power factor corrected servers and sensitive electronics.

Compact design fits comfortably in short-depth rack applications.

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.

Innovative, easy-to-use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.

Customize UPS capabilities with management cards.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Warns when a battery is not available to provide backup power.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Automatically starts up the connected equipment upon the return of utility power.

Maximizes battery performance, life, and reliability through intelligent precision charging.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Provides early-warning fault analysis ensuring proactive component replacement.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair or MTTR.

Enables a quick recovery from overload events.

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Provides notification of changing utility power and UPS conditions.

Provides management of the UPS via a USB port (not available on all models).

Provides management of the UPS via a serial port.

Provides remote power management of the UPS over the network.

Quickly understand unit and power status with visual indicators.

Related Questions and Answers

Q: 1. Would this work on the canon r8

A: Yes, the following unit is a single pin unit and will work with any SLR/ mirrorless unit. Be mindful unit offers no TTL metering. For TTL options please review the following item. Godox Ving V860III TTL Li-Ion Flash Kit for Canon Cameras BH #GOV860IIIC • MFR #V860IIIC https://bhpho.to/42P6upu

Q: 2. Can anyone tell me how to keep these batteries from dying completely? I have had 3 die for no apparent reason!

A: The Godox Li-Ion Battery for AD400Pro Flash Head needs to be periodically monitored to ensure that they are never allowed to completely drain to zero charge. Aside from this practice, there is nothing else that needs to be done in terms of battery maintenance. This practice will not help with defective batteries.

Q: 3. Is this compatible with the Flashpoint model?

A: Yes, the Godox Li-Ion Battery for AD400Pro Flash Head would be compatible for use with the Flashpoint XPLOR 400 Pro Compact TTL R2 Monolight. The Godox Li-Ion Battery for AD400Pro Flash Head and the Flashpoint XPLOR 400 Pro Compact TTL R2 Monolight are the same unit made in the same factory, simply re-branded by Godox with different names for distribution purposes.

Q: 4. Anyone know how to activate the LED display on top? No button on the 400 version.

A: The only way to see the readout on the battery is by plugging it in.

Q: 5. Will Godox V850II Flash work with Fujifilm X-H2?

A: The Godox VING V850II Li-Ion Flash Kit BH #GOV850IIKIT can be used with the FUJIFILM X-H2.

Q: 6. Does this work for the X-T3 as well?

A: Yes. It says so under "Overview".

Q: 7. How long does this take to charge with a Fujifilm charger?

A: Approximately 2.5 hours per battery.

Q: 8. Does it come with the cable to plug into a power outlet?

A: The Vibesta PTPK Peragos Tube SLB-1 Li-Ion Battery Power Kit BH #VI4SLB1PTBPK does not come with a power cable.

Q: 9. Can you fit two of these flashes on an S type bracket?

A: No, one flash unit only.

Q: 10. Is this battery compatible with the ELB 400?

A: No. The following battrey is designed and made for the ELB 500.