Light your driveway, sidewalk, patio, campsite, base camp, or just about any open space using renewable solar energy with the Solar + LED Floodlight 800 from Wagan Tech. An array of 40 SMD2835 LEDs produce a bright flood beam at a cool white color temperature of 6000K with a slight blue hue that is easy on the eyes. Just like a streetlight, this thin, streamlined lamp turns on automatically at dusk and provides 100 lumens of standby light for security and gentle illumination. If someone passes within range, a motion detector boosts the output to 800 lumens. The light drops back down to 100 lumens after 20 seconds of no motion detected. After five hours or when the battery is below 30%, the standby light shuts off after five minutes when there is no motion to conserve the battery charge.

The floodlight is designed to be mounted on a wall or a user-supplied pole. No electrical wiring is required, just a few basic tools for mounting, so it can be put just about anywhere you need light, even in remote locations like out building or dumpsters. It takes six hours of full sunlight for the solar panel to charge the lamp's internal lithium battery, and that charge is enough to power the light for up to three nights. Naturally, the floodlight is designed to be weather resistant and carries an IP65 dustproof and water-resistant rating. Its housing is made with light but durable polycarbonate and ABS plastic, and treated with a coating that protects it from harmful ultraviolet (UV) light that can cause it to become brittle or easily prone to damage over time.

100/800 Lumens    40 Bright White SMD2835 LEDs    Cool White 6000K Color Temperature    PIR Motion Detector Activated    Detection Range 9-26', 120° Angle    Self-Contained—No Wiring Required    Mounts on Pole or Wall    Charges in 6 Hours of Full Sun    Up to 3 Nights Runtime    7.4V, 5.4Ah Li-Ion Battery

• 40 white SMD2835 LEDs
• 6000K cool white color temperature has a slight blue hue that is easy on the eye
• 100 lumens standby, 800 lumens when motion is detected
• Drops back to standby power 20 seconds after motion is detected
• After five hours or below 30% battery level: standby shuts off five minutes after motion is detected
• Integrated PIR motion sensor detects movement from 9 to 26 feet away at an angle of 120° from the sensor

• Built-in 7W monocrystalline solar panel
• Panel charges the internal lithium battery in six hours at full sun
• Provides up to three nights of runtime
• Overcharge and over-discharge circuitry protects the battery from damage

• No electrical wiring required
• Polycarbonate, ABS plastic, and glass housing
• IP65-rated weather resistant
• Mounts on user-supplied pole or wall
• Installation height: 8-11' / 2.5-3.5 m
• Operating temperature -4°F to 122°
• Compact design is just 17.0x7.5x2"
• Weight: 5.2 lb
• Certifications: CE, RoHS, BSCI

Related Questions and Answers

Q: 1. Is this also a flash meter?

A: This is only a color meter

Q: 2. Does the 2 light softbox kit come with the adequate speedrings to mount to the flood lights?

A: The Impact Qualite LED Flood 2-Light Bundle comes with two speedrings.

Q: 3. Can these lights be dimmed using a phase-type dimmer such as an NSI/Leviton dimmer pack?

A: The Impact Qualite QL-3560 Daylight LED Floodlight is not designed to work with dimmer packs. It has not been tested. And it does have a dimmer built into the light.

Q: 4. Is there an "R" version like the C-700R that can trigger flash via radio slave or does it ONLY have a PC cord terminal?

A: The Sekonic SPECTROMETER C-800 can only be connected to a flash using the PC synch terminal. This unit is not designed to work with wireless modules to trigger flashes.

Q: 5. Since this is a Color Meter only, do you know of a model that has both an exposure and color meter functionality in one small device? I think both the C-800 and C-700 series are color meter alone. I need both in one unit and in a rugged body unlike Lumu and other attachments.

A: I'm sorry, no, there isn't a color meter & exposure meter in one.

Q: 6. Excuse my ignorance, but are these static lights, or a flash? Im looking for more lighting to use with my photo booth. Im already using a ELINCHROM D-LITE 400W/S RX 4. Still not getting enough light for the photo preview which is done in video mode when the flash is not firing. Will these work for me?

A: The LED lamps in this kit are continuous and are equal to 250 watts of tungsten light, whereas the modeling lamp in your Elinchrom monolights are only 100 watts each.

Q: 7. Sekonic released C800-U. I'm wondering the difference or upgrade?

A: They are changing all model numbers to include where the warranty is offered. The one with U in the end has warranty in the USA. These older options that have no letter at the end of the model number still have warranty in the USA though.

Q: 8. The Sekonic C-7000 industrial model can export a CSV file with spectral distribution data in 1 and 5-nm samples. Can the C-800 do this? The table in the software's manual would seem to indicate not.

A: I'm sorry, no.

Q: 9. Can I keep this light on for 9 hours straight? I need something for videos, but also it would be nice to use it on my home office. Thanks!

A: Hi Victor, You should be able to run the lights continuously.

Q: 10. I have this light. I'm eyeing Angler Beauty Reflector BH#ANEG55. What adapter does that beauty dish need to fit to this light?

A: There is no adapter that will work with the Impact Qualite QL-3560 Daylight LED Floodlight.