Enjoy high-end picture quality when hooking up your components with this 6.6' High-Speed HDMI Cable from Bullet Train. The cable features twisted internal cabling to maximize transfer speed and image quality, with support for video up to 4K, HDR, and a wide color gamut that's ISF-certified to be accurate to the source material. With compatible systems, immersive surround audio is also possible through the cable, with support for Dolby Audio, DTS Audio, and 7.1 surround speaker configurations.

Supports 4K, 3D, and a Wide Color Gamut    Up to 18 Gb/s Transfers Rate    ISF-Certified for Accurate Color    Dolby Audio, DTS Audio & 7.1 Audio    HDMI 2.0 Specification    Supports 24 & 60 fps    ARC (Audio Return Channel)    CL3 Rated for In-Wall Installation

• HDMI 2.0 specification
• Up to 18 Gb/s transfer rate
• Support for 24 at 60 fps
• ARC and 3D support
• CL3 rated for in-wall installation

Related Questions and Answers

Q: 1. Can this charge the SmallRig L-Series/NP-F970 USB-C Rechargeable Camera Battery?

A: Yes, the Watson Pro L-Train 6-Bay NP-F Battery Charger would charge multiple SmallRig L-Series/NP-F970 USB-C Rechargeable Camera Batteries. Furthermore, the Smallrig battery can be charged via USB-C. ANKER 735 Nano II 3-Port USB 65W GaN II Charger BH #ANA2667J111

Q: 2. What’s the difference between 2A & 1.2A?

A: The Watson Pro L-Train 6-Bay NP-F Battery Charger has two different amp settings for charging, 2A and 1.2A. At 2A a battery is charged in about half the time as at 1.2A.

Q: 3. I want to use all my Bowens softboxes with profoto D2, is this ring compatible or any recommendation?

A: This ring is compatible with most softboxes.

Q: 4. Will this speed ring accept a Plume Hex Wafer?

A: Hi, i don't have this softbox, but in theory yes. Depend exclusively of caliber of the metal rod.

Q: 5. Will this fit a Chimera 30" Lantern?

A: Yes this speed ring can work with a Chimera 30" Lantern.

Q: 6. What is the total power draw in watts with all 6 bays charging at 2 amps?

A: The total power draw of the Watson Pro L-Train 6-Bay NP-F Battery Charger would be about 60W with all batteries charging at full speed.

Q: 7. I heard from someone that this background is opaque. I also read on your site that there is no need to relight the background, leading me to believe that the lighting from behind it will light it evenly and sufficiently. Please shed light on this contradiction...?

A: The HiLite Bottletop Cover is a cover that fits over the Hilite and is not translucent. Lastolites site recommends to not light it from behind so front lighting will be needed.

Q: 8. can the base separate?I would like to confirm if on this unit, are the 4 screws at the bottom of the base that are shown in the photo, is it possible if those were loosen, that I could then detach the black rubber neck piece, resulting in having 2 separate pieces?I have a older Photoflex Octobox that I use with another strobe, and when I mounted my octobox to those strobes there was a plate that appears to look just like the one in this photo but it does not have that wide base part with the 4 screws, which is where the rods connect to.I have the D2 profoto now, but i just need the speedring that will slide onto barrel of my profoto and the other end will be the thin, flat, round plate that I would connect to my octobox and tighthen down with the 4 screws it has.So if I could verify that this item could be separated into 2 pieces, this might be what I have been looking for?

A: The center ring and the outer ring can be detached from one another, however if you just need the center ring for a custom set up, we also offer the Profoto Adapter Plate for Custom Made Reflectors to fit Profoto Flash Heads B&H # PRAPR. Please see the image below.

Q: 9. If I'm using it for video, and have an led main and hair light;1. Is it possible to get enough light from led lights inside the background? 2. Wouldn't there be a spill issue?

A: To use the green screen most effectively, it would need to be lit independently from the subject.

Q: 10. what is the actual diameter of the flange? I'm trying to see if the Profoto insert will also work in other modifiers.

A: As per the manufacturer, the diameter of the flange is 4