The ten foot Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors from Kopul is a sturdy and reliable Y-cable that sends a stereo signal from a 1/8" (3.5 mm) output to two XLR male connectors without any signal loss. The cable allows for a variety of cabling options including connecting the output of a portable audio device, personal music player, or computer to a mixer or other device that has XLR inputs.

The gold-plated 1/8" (3.5 mm) stereo mini plug and nickel-plated XLR connectors with silver-plated contacts assure the transfer of the audio signal without any degradation. Oxygen-free copper spiral shielding provides enhanced protection from interference while maintaining flexibility.

To provide strain relief to the 1/8" connector, the in-line molded splitter is positioned approximately halfway down the length of the cable. This means that when used to connect to two monitors, the split cables will allow you to spread them apart a maximum of ten feet, equal to the total length of the cable. Using an in-line molded splitter ensures maximum reliability and greater durability compared to Y-cables that are split at the 1/8" connector.

Gold-Plated 1/8" Rean Connector    Nickel-Plated XLR Connectors    No Signal Loss at the Two Outputs    OFC Spiral-Shielding for RF Rejection    Durable In-Line Molded Splitter

Gold-plated 1/8" (3.5 mm) TRS stereo mini connector manufactured by Rean, a Neutrik trademark

Nickel-plated male XLR connectors with silver-plated contacts and die-cast zinc housing with chuck-style strain relief

Premium OFC spiral-shield for enhanced protection from interference while still maintaining flexibility

No signal loss between the 1/8" output and the dual XLR connectors

In-line molded splitter provides strain relief and greater durability than Y-cables that split at the connector

Related Questions and Answers

Q: 1. Can I use a SM58 into my DSLR with this?

A: Yes as long as your camera has a 3.5mm mic input.

Q: 2. Is this balanced or unbalanced?

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is an unbalanced cable.

Q: 3. Where does it split (how far the stereo plug) ?

A: About 18".

Q: 4. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 5. How is this cable wired? Is it balanced? I'm looking for T-2, R-3, S-1...

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable (1') is balanced as it has 3 conductors.

Q: 6. Is shielding/xlr design strong enough for this to be run next to a power strip or two (hehe) and have less distortion than a standard or high quality 3.5mm cable?

A: No guarantees - but it very well may help.

Q: 7. Hello. I have a Salora Hi-Fi 6300 Micro with 2 Salora KS 430 Hi-Fi speakers, will it works fine? I mean, this speakers have a very high quality, and want to know if this will work enough or need some better

A: If the connectors are correct, they'll work. To prevent quality drop, use as short as cable as possible.

Q: 8. Will this work for a XLR output of a mixer into a PC Aux input (Livestream HD31)?

A: I'm going to disagree with the first response. This patch chord is mini-jack to an XLR male (meaning output function). You can use the chord bring a signal from your PC to the mixer, but not vice versa. You want a mini-jack to XLR input (female) chord. There are many such chords available from B&H.

Q: 9. Can I use this cable to plug a Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface?

A: No, the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is not compatible for use with the Deity Microphones V-Mic D3 Pro Shotgun Microphone. The V-Mic D3 Pro requires plug-in power to function, so you will need to use an XLR adapter with a phantom power converter like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DEDXLR), which is the adapter that Deity includes with their location recording bundle for connection to an XLR input, and connect to a device that will supply phantom power. The D-XLR adapter will allow you to use the original 3.5mm TRRS smart cable that comes included with the microphone to convert the plug and enable compatibility for connection to the XLR input on the Focusrite Scarlett Solo USB Audio Interface. You will need to have the phantom power (48V) switch for the XLR input on the interface turned on in order to supply power the mic. If you need a longer cable, simply attach a standard XLR to XLR cable between the XLR input on the interface and the XLR output on the Deity D-XLR adapter. For example, you can use the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010) or similar cable in any length you prefer for your extension.

Q: 10. Is this cable balanced ?

A: No, the Kopul XRSM cable is an unbalanced cable which can be used for connecting a microphone or line level signal to an unbalanced audio input on a camera, recorder, mixer or other device.