The Concert 88x UHF Wireless System with SE10 Earset Mic from Samson includes a CR88x wireless receiver, a CB88 beltpack transmitter, and an SE10 omnidirectional microphone. It combines professional-grade audio clarity, reliable operation in the UHF frequency band and easy setup. It can be used in various wireless applications such as for singers, worship leaders, educators, presenters, and more.

The Concert 88x receiver features one-touch scanning to analyze all available channels, selecting the clearest channel for a performance space. The system then locks the transmitter and receiver together on the selected channel and offers 100 frequencies with a 25 MHz bandwidth for your event. The true-diversity design minimizes dropouts and provides reception for up to 300'.

Additionally, the half-rack receiver's rear panel provides both balanced XLR and unbalanced 1/4" connections, and the included rackmount kit allows you to permanently install it in a 19" rack. The CB88 beltpack transmitter features a silent mute switch and an adjustable gain control for optimal performance. It runs on two AA batteries for up to eight hours.

Finally, the wireless system includes the Samson SE10 low-profile miniature earset microphone with a 3mm capsule. This microphone is lightweight and comfortable and is built with an omnidirectional pickup pattern, which results in a clear and articulate sound regardless of the position of the capsule.

CR88x Wireless Receiver    CB88 Wireless Beltpack Transmitter    SE10 Earset Microphone    Omnidirectional Polar Pattern    One-Touch Automatic Frequency Scan    True Diversity, Dual-Antenna Design    Operating Range up to 300'    Use up to 8 Systems Simultaneously    Balanced XLR and Unbalanced 1/4" Outputs

• High-performance professional UHF wireless system
• 100 operating channels across 25 MHz bandwidth
• Up to 8 systems can be used simultaneously per frequency band (region dependent)
• 300' operating range (line-of-site)
• Rackmount kit included

• One-touch automatic frequency scan finds the best operating channel
• Two-digit LED display
• Infrared link locks the receiver and transmitter to the same channel
• True diversity design minimizes dropouts
• Tone key and auto mute prevents unwanted noise when transmitter is off or out of range
• Balanced XLR and unbalanced 1/4" outputs

• Adjustable input gain
• Silent mute button
• Power and mute status indicator
• Metal belt clip
• Up to eight hours of continuous use from two AA batteries

• Miniature condenser microphone for nearly invisible use
• 3mm mic capsule
• Omnidirectional pickup pattern
• Easily adjusts to fit left or right ear; retaining band holds mic in place

Related Questions and Answers

Q: 1. I'm shooting in an environment that doesn't allow for any wireless transmission. Is it possible to control two motors with a single handgrip through a wired-only configuration? Can I turn off all wireless function? Can I run p-tap power into one motor, then into the second motor, then into the handgrip, and power/control all 3 devices?

A: Yes, The Tilta Nucleus-M will allow you to run wired for control. The way to turn off the wireless setting is under the high medium low settings. There's a setting for off, then just run a cable from the hand grips to the motors.

Q: 2. I'm hoping I can use one grip for focus and the other grip for zoom. Is this possible?

A: Yes. The following kit includes. 2x Nucleus-M FIZ Lens Control Motors

Q: 3. The system comes with 2 handgrips -one to control focus, and the other iris and zoom, but the set includes only 2 motors, don't you need 3?

A: Yes, you will need to purchase an additional motor for focus, iris, and zoom when working with the Tilta Nucleus-M Wireless Lens Control System: Tilta Nucleus-M Motor Kit I (B&H # TIWLCT03M1)

Q: 4. Can you send a sync such as from a Tentacle through the nine pin LEMO port on a motor and have it pass through to the camera, specifically a Komodo?

A: No, The Tilta Nucleus-M would not pass timecode.

Q: 5. Is there a way to set the range on the FIZ? The user guide only shows how to on the handle.

A: No, their is no way to do such Tilta Nucleus-M Wireless Lens Control System Partial Kit I.

Q: 6. How to fix a motor that will not respond to the handle on the same frequency? The motor LED is red and will not turn white.

A: Unfortunately we can't offer much assistance with this issue via Q&A. To get better support for your Tilta Nucleus-M Wireless Lens Control System connection, please reach out to our product specialists via email using the link below, live chat, or by calling us at 800.606.6969. See: https://www.bhphotovideo.com/find/contactForm.jsp

Q: 7. Se podran adquirir juegos de engranajes para el motor de lente en otras medidas , como por ejemplo de las siguientes medidas 0.5, 0.6, 0.8, 1.0 ?

A: Comunquese con Tilta directamente para obtener asistencia para este producto en support@tilta.com(Translated with Google Translate)

Q: 8. Any one use this follow Focus in a Rig with any Sony A7 cameras? I want to use it with A7III and Rokinon cine lens I have .Thanks

A: This lens control is camera agnostic meaning you can use it with any camera and cine geared lens.

Q: 9. So I can control a Nano and a this motor with just the left handle?

A: This handle can control either the Nucleus M or Nucleus Nano motor. it can only control 1 motor at a time.

Q: 10. Can the Nucleus M work with the Ronin SC ? (I think the power of the Nano may not be enough for my lenses.)

A: Technically, the Tilta Nucleus-M Wireless Lens Control System Partial Kit I BH #TIWLCT03K1 can be adapted to the DJI Ronin-SC Gimbal Stabilizer if you outfit a 15mm rod mount and power the motor externally of the DJI Ronin-SC Gimbal Stabilizer. You are working with a limited payload of 4.4 lb and a small camera carriage for balancing, so be mindful.