Share ports between your tablet or phone and a computer with the US3310 2-Port USB 3.2 Gen 1 Sharing Switch with Power Pass-Through from ATEN. This switch is compatible with Mac, Windows, Android, and iOS devices including laptops, tablets, and smartphones. Plug peripherals into two USB 3.2 Gen 1 Type-A ports; connect a display via an HDMI 1.4 port, with resolutions up to 3840 x 2160 at 30 Hz. A USB Type-C port on the rear of the switch provides power delivery pass-through when using an optional AC adapter, supporting 5, 9, 15, and 20V power profiles and up to 85W to a computer or 10W to smartphone or tablet. Use the remote selection button to easily switch between hosts, with an LED indicator alerting you to the current active connection. Sporting an aluminum housing, the ATEN US3310 Sharing Switch features over-current protection.

2 x USB 3.2 Gen 2 Type-A Ports    1 x HDMI 1.4 Port    2 x USB 3.2 Gen 1 Type-C Host Connector    1 x USB Type-C Power Pass-Through Port    Supports Power Delivery from 10 to 85W    Supports up to 3840 x 2160 @ 30Hz    Share HDMI & USB Ports Between Two Hosts    Remote Selection Button Switches Host    Aluminum Housing    Works with Windows, Mac, iOS & Android

USB 3.2 Gen 1 features a maximum throughput of 5 Gb/s and is synonymous with USB 3.1 Gen 1 and USB 3.0.

Video DynaSync allows EDID and HDCP monitors and computers to function seamlessly with fast real-time switching, including with devices in Samsung DeX mode and Huawei Desktop mode.

Related Questions and Answers

Q: 1. how much watt usage for this card?

A: I do not know the answer to that question, as I have an 1150 watt power supply, and simply never was concerned.

Q: 2. We can see USB 3.0 in the specs, but USB 3.1 on the pic. What is real?

A: USB 3.0 was renamed to USB 3.1. They are the same speed.

Q: 3. Will this card work on PCI Express 1.0?

A: You can but it is not recommended as there may be a performance hit.

Q: 4. Will the hard drives in this enclosure spin down on idle?

A: In almost every case yes, they will spin down.

Q: 5. Are the drives hot swappable?

A: The OWC Mercury Elite Pro is a RAID enclosure, so the drives are not hot-swappable within a RAID array. Any blank drive inserted will need to be rebuilt into the array.

Q: 6. Will this card work under Yosemite? on a Mac Pro 5,1 running Yosemite?

A: I've been running this card for months on the came config (Mac Pro 5,1) and it's awesome -- a great way to help extend the life of your Mac. Go to the company website and make sure you're running the latest firmware and drivers. If you're still using the stock ATI graphics card, consider replacing it with the EVGA Nvidia GTX-680 (Mac edition). -- I did. Also consider more RAM. I added 32 GB.

Q: 7. Can you place the enclosure on its side during operation? Or must it be standing upright?

A: You can use the OWC Mercury Elite Pro Dual 2-Bay USB 3.2 Gen 2 RAID Enclosure with 3-Port Hub BH #OWCMEDCH7T00 on its side.

Q: 8. Would this work on an Xserve 2,1?

A: not sure - sorry -the only problem I have it doesn't power every external usb 3.0 or 2.0 bus powered drive. media transfer stops half way through. I find that the new thunderbolt bus powered external drives with 3.0 connections do transfer media fine.

Q: 9. Do the four ports share a 5 Gb/s bandwidth, so the more devices you connect, the slower each runs? Or, does each port have a dedicated 5 Gb/s bandwidth?

A: They do not share a 5 Gb/s bandwidth. Each port has a dedicated 5 Gb/s bandwidth.

Q: 10. do need power supply with this card?

A: No, the Sonnet USB3-4PM-E Allegro 4-Port USB 3.2 Gen 1 PCI Express Card BH #SOUSB34PME gets power from the PCIe slot.