This Divider Kit from TrekPak is designed for use within a Pelican 1560 Large Protector Case. It can replace an existing divider system, or be used to create partitions within a compatible and completely empty Pelican case.

TrekPak divider kits utilize water-, tear-, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider locking pins. Once installed, they maximize available carrying space, protect equipment or valuables for transport, and provide interior organization that can easily be rearranged or customized along with any changes to the contents of the Pelican case.

The divider kit's design allows one of the two prongs on a divider locking pin to be inserted within a partition's corrugated core. Two adjacent partitions can accommodate both prongs on a single divider locking pin, resulting in them being firmly held together. Each divider locking pin features a nylon pull tab for easy removal, and the rapid release of any connected partitions.

Included within this divider kit are two perimeter insert sections, two 21" divider sections, two 12" divider sections, 20 divider locking pins, a divider cutter, and one bottom as well as one convoluted, egg-crate top foam unit. To ensure that the dividers properly correspond to a Pelican 1560 Large Protector Case's 9" internal height, the bottom foam unit must always be used when installing this divider kit. The perimeter insert sections can then be placed on top of the bottom foam unit so that together, they conform to the interior sides of the Pelican case. Like the dividers, the perimeter insert sections are constructed from foam with a corrugated core so a partition can be connected to the perimeter insert sections by a divider locking pin.

Items to be stored within the Pelican case can then be arranged on top of the bottom foam unit and within the perimeter insert sections before they are segmented using the dividers. Like the divider locking pins, the cutting tool integrates with the dividers' corrugated core. Multiple partitions can be quickly, easily, and precisely created by sliding the cutting tool through the dividers which can then be arranged and rearranged according to whatever is placed within the Pelican case.

A previously-installed top foam unit within a compatible Pelican case's lid does not need to be replaced with the included convoluted, egg-crate foam. However, when in use, the egg-crate foam's soft peaks help maximize cushioning to the contours of items that come into the most contact with it.

Fitted for Pelican 1560 Protector Case    Continuously-Adjustable Divider System    Organizes and Protects Case Contents    Maximizes Available Space    Fast, Easy Configuration    Durable and Soft Foam Dividers    Water, Tear, and Shred Resistant    Steel Divider Locking Pins    Egg-Crate Lid Foam, Bottom Layer Foam    Made in the USA

• For use within a Pelican 1560 Large Protector Case
• Replaces an existing divider system, or can be used to create partitions within a compatible and completely empty Pelican case
• Maximizes available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged or customized
• Utilizes water-, tear-, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider locking pins
• Divider kit provides two perimeter insert sections, two 21" divider sections, two 12" divider sections, 20 divider locking pins, one divider cutter, and one bottom as well as one convoluted, egg-crate top foam unit
• Cutting tool allows quick, easy, and precise creation of multiple partitions from divider sections
• Divider locking pins create firm connections among perimeter insert sections and partitions
• Nylon pull tab on each divider locking pin allows perimeter insert sections and partitions to be separated for fast configuration changes
• Bottom foam unit ensures that the included dividers properly correspond to a Pelican 1560 Large Protector Case's 9" internal height
• Convoluted, egg-crate lid foam's soft peaks help maximize cushioning to the contours of items that come into the most contact with it

  Related Questions and Answers

  Q: 1. Is there a TrekPak available for Pelican 1620?

  A: No, sorry, there is not. However, there is this padded divider set available. Pelican 1625 Padded Divider Set B&H # PEDS1620

  Q: 2. How do you keep the bottoms of the dividers from sliding around? Do they have clips like the tops to do?

  A: The way the locking pins connect onto the TrekPak Divider Kit for Pelican 1610 Large Protector Case it the partitions do not move.

  Q: 3. what are the pockets size?

  A: The pocket size is adjustable, you can make them any size you like.

  Q: 4. Does this system provide as much impact protection as the foam-and-velcro dividers?

  A: I would say it is probably more protective. It allows a more rigid, customized fit. If you are careful, your stuff will not move around at all.

  Q: 5. Does this fit into the Pelican 1615AirTP Wheeled Check-In Case?

  A: Sorry, no that kit is the wrong size. You need to use this one: TrekPak Divider Kit for Pelican 1615 Air Case B&H # TRPA1615CI.

  Q: 6. Does this set come with base foam or lid foam - or just the dividers?

  A: Yes, includes lid egg crate piece and bottom flat piece.

  Q: 7. Will this fit the Pelican 1535?

  A: No, the TrekPak Divider Kit for Pelican 1500 Medium Protector Case is made for the Pelican 1500. It does not fit the 1535.

  Q: 8. What's the interior dimensions of the 1400 case with the Trekpak wall installed?

  A: While Pelican does list the interior dimensions of the Pelican 1400 Protector Case as measuring 11.8" × 8.9" × 5.2", they do not list the measurement with the TrekPak Divider Kit for Pelican 1400 Small Protector Case installed in place. They do state the panels are 7/16" (1.1 cm) thick, so as there are two perimeter wall panels, I would estimate the size with the panels as 10.9" x 8" x 4.3" in size.

  Q: 9. How does the padding protection for camera gear compare to the older style padded dividers?

  A: Also very reconfigurable for various projects/equipment.

  Q: 10. I'm trying to buy extra dividers for the trekpak 1610. I don't know what height to buy. It doesn't give me a height on the dividers it ships with. I don't know which height to purchase due to tw bottom foam. And idea?

  A: There are 2 sizes and they actually match the case type so a 1610 is a specific case with the heights specified on that case spec.