The ATA-300-rated ProX XZF-MIDM32 by ZCase is a Flip-Ready easy retracting hydraulic lift case designed to protect and transport the Midas M32 console while offering fluid and effortless positioning of your mixer.

Featuring a patent-pending hydraulic lift system that provides easy movement from a vertical transport position to the horizontal operation position with little physical effort, the case provides an integrated rotational mechanism, which is attached to the console mounting bed and uses gas springs to lift the console into position. Simply open the two lower doors and pull the console, letting the case do the heavy lifting.

The case also includes a large doghouse with left and right openings for snakes. The rugged case is constructed from laminated plywood with aluminum edging, heavy-duty steel ball corners, recessed butterfly twist locks, and rubber spring-action recessed handles. A Vibro-Insulation system provides internal vibration protection during transport. Four industrial-grade 4" locking casters offer magnetic positioning for ease in setup.

Easy Single-Person Setup, No Lifting    ATA-300-Rated Flight/Road Case    Vibro-Insulation System    Protects from Vibration During Transport    Patent-Pending Rotational Mechanism    Laminated Plywood with Aluminum Edging    Recessed Butterfly Latches and Handles    Doghouse with Left and Right Openings    Four Industrial-Grade 4" Locking Casters

• Flip-Ready ATA-300 flight/road case, exclusively by ProX in North America
• Effortless movement from a vertical transport position to the horizontal operational position using just one finger
• ZCase patent-pending rotational mechanism
• All hardware by Penn Elcom
• Vibro-Insulation System for internal vibration protection
• Magnetic catches on lower doors hold them open to protect them during movement of the console
• Standard silver-on-black design
• Large doghouse area with left and right openings
• Laminated 3/4" and 3/8" plywood and solid wood components—heavy plywood base and engraved wood side panels
• Rubber spring-action recessed handles
• Easy locking via precision-fit aluminum tongue and groove
• Heavy and powerful steel ball corners and dual anchor rivets
• Recessed industrial butterfly twist-lock latches
• Four industrial-grade, self-centering 4" locking casters

Related Questions and Answers

Q: 1. is this soft box good for full body shots or more headshots??

A: It really depends on the distance of the subject and if the flash unit is capable of shooting at wider angles like 24mm. If so, you could be able to shoot full body.

Q: 2. I am missing the screw that screws into the light stand part of the mount any help?

A: Take the bracket to a hardware store to match up a new bolt for the missing one. All of the bracket thumb bolts have the same thread pattern, so you only need to get one long enough to do the job (around 5/8 .) You should also be able to get a press-on plastic cap to cover the bolt head for a cleaner job. I've been there. Easy fix - good luck!

Q: 3. Does it work well with Pocketwizard FlexTT5? Does the bracket allow you to tilt?

A: Yes this can work with a Pocket Wizard TT5 attach to the cold shoe. The bracket can tilt directly on the stand mount at the bottom.

Q: 4. Will this work with Raya Single LED/Fluorescent Lamp Holder with Umbrella Socket?

A: I'm sorry, no, it is compatible with the Raya lamp holder. This softbox is only meant to be used with a hotshoe flash with a round or rectangular head.

Q: 5. How wide is the inner velcro?

A: The inner diffuser is held in with hooks. The outer velcro is about 1/2".

Q: 6. What comes in the box? What do I need to buy separately?

A: You get the lightbox, inner/outside diffusers & S hooks, light stand mounting bracket, zippered soft case, and instruction booklet. So far, no failures; it's a decent kit.

Q: 7. Does it come with the light bulbs and if not what kind do I need?

A: You use it with a speedite.

Q: 8. can this be mounted to a tripod?

A: Exactly what I did. I had an old tripod no longer used, unscrewed the top and screwed on the box. Works great, be careful of wind.

Q: 9. I see the back panel of the box seems to have a large Square open configuration option. Can the 24" soft-box be strapped/mounted to a 1x LED LightPanel 12" Square? (Like an "Astra" or similar 1x?) Thanks! It looks like a nice, fast, flexfill-type pop-up box! It would be great to increase the surface area of a LightPanel and do it without a lot of set-up time. Nice Price Point.

A: This unit is designed for speedlights. It would not be compatible with a Astra or similar light.

Q: 10. What is the size of the folded unit in it's case?

A: The carrying case is 12 X 7.5 X 3.5 inches