Power your Sony FX6 or FX9 cine-style camera directly from a wall outlet using this AC Power Supply from IndiPRO Tools. This handy power supply provides continuous power for an event or in the studio. It has an 8' cable and features a 19.5V barrel output compatible with the FX6 and FX9, plus a standard North American power plug. It supports worldwide 100 to 240V power input range using separately available plug adapters.

Powers FX6/FX9 Directly from Wall Outlet    For Continuous Power at Event or Studio    8' Cable Length    North American Plug    100-240V Input, Separate Plug Adapters

• Sony ILME-FX6
• Sony PXW-FX9

Related Questions and Answers

Q: 1. What voltage are the two DC out sockets? i.e can I power a SmallHD DP4 monitor as well as the camera?

A: Yes you can power both units. Each output is 7.4 volts, you would need buy this cable to power the SmallHD DP4B&H # IN81PPC MFR # 81PPC

Q: 2. Could I use this to power a Atomos Shogun?

A: No. This unit would work see linkhttps://a href= http://www.bhphotovideo.com/c/product/1324659-REG/indipro_tools_72slsl5_7_2v_regulated_dual_sony.html target= _blank www.bhphotovideo.com/c/product/1324659-REG/indipro_tools_72slsl5_7_2v_regulated_dual_sony.html/aMFR # 72SLSL5

Q: 3. How does this mount to the camera - or will you need a cage?

A: You could use a hot shoe to 1/4 adapter to mount this on top of the camera. The Vello Multi-Function Ball Head with Removable Top & Bottom Shoe Mounts would be one example. However, this is fairly large and might be rather awkward. If you do not want a cage, then get a mini baseplate with 15mm rods such as the IndiPRO Tools DSLR Baseplate with 9 15mm Rods. Then with IndiPRO Tools Dual 15mm Rod Clamp with 1/4 -20 for Power Pod, you can mount the Universal Power Pod to the rods.

Q: 4. Any suggestions on how to mechanically attach this to the Ronin RS 2?

A: This product has a 1/4”-20 screw to attach it. You could add this NATO accessory clamp to the side of the RS2, it has a 1/4”-20 thread to attach the grip. https://bhpho.to/3dCtUaw

Q: 5. Would this work for a Panasonic HC-VX870?

A: No, the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery (8V, 8') is incompatible with the Panasonic HC-VX870K 4K Ultra HD Camcorder.

Q: 6. Once the Powergrip is about empty can I attach another battery to it (or it's AC charger) and keep powering my camera?

A: No, the unit will need to be recharged.

Q: 7. Will the X-T4 battery door close with this product in place?

A: Yes, the IndiPRO Tools AC Power Supply to FUJIFILM NP-W235-Type Dummy Battery will allow the Fuji XT4 battery door to close. You need to thread the cable through a rubber opening by the battery door in order to close it.

Q: 8. Is the dummy battery cable tip proprietary? I have dummy batteries for different batteries (Sony and Olympus) so I want to know if I can use those cable tips on this one.

A: No not proprietary, the 8 Volt output is a standard 2.1mm and the 12Volt output is a 2.5MM connector

Q: 9. Is this adapter compatible with the Panasonic ag-hpx170p?

A: Yes, the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery (8V, 8') should work with the Panasonic AG-HPX170 P2HD Solid-State Camcorder (B&H # PAAGHPX170).

Q: 10. So if you had two 14.5V batteries, does it output the two batteries voltages in series (doubling the voltage to 28V) or in parallel (doubling the time)?

A: The IndiPRO Tools Field Power Station (V-Mount) outputs the same voltage as the batteries you choose to use with it, so two 14.5V batteries will output at 14.5V.