The 12 RU Shockproof Workstation Case with Dual Side Tables and Drawers from Pro X is designed to be used as a workstation on wheels for sound equipment and DJ applications. It is constructed with 3/8" plywood, durable handles and pulls, and reinforced steel ball corners.

The shockproof workstation features a 24" deep front-to-rear rail, 1-1/2" foam for shock protection, four easy-to-open drawers, 12 RU for 19" rack gear, and two side work tables to keep your gear organized and easily accessible for professional events. Each cover of the workstation detaches and becomes a side work table allowing for event preparation or repair.

Additionally, the case offers easy loading and unloading with professional-grade casters and recessed fold out handles on the sides for two person lifting. It is built with a Honeycomb Digital laminated surface design on the 3/8" plywood, which gives the case an alien look. This case is designed to handle rough and tough everyday punishment.

Signature Series 3/8" Plywood    Durable Handles and Pulls    Reinforced Steel Ball Corners    4 x Easy Open Drawers    2 x Side Work Tables    12 RU Rack Space    Standard 19" Mounting Rail Width    4" Caster Wheels for Transport

12-space vertical load shockproof

Professional amp rack 24" deep front-to-rear rail

Standard 19" mounting rail width

1-1/2" foam for efficient shock protection

Back and front removable lids work as tables

Durable and solid rack rails

ATA-300 style gig-ready flight road case

Signature series certified laminated gig-ready 3/8" plywood

Dual anchor rivets

Two recessed spring-action handles per side

Easy locking fit and tongue

Heavy-duty steel ball corners

Industrial strength latches and rubber feet

2.5" front/rear door depth

Includes mounting hardware (screw kit)

Four heavy-duty 4" casters for mobility (two are locking)

Related Questions and Answers

Q: 1. Has anyone every tried adding markings for precise measurement?

A: The rotation knob on the device is haxagonal. I have marked the vertices of the rotation knob with numbers from 1 to 6. I have used a silver colour marker to do that.Before I start rotating the knob , I note the number which is at 12-o-clock position and then start rotating it by half a turn or full turn based on the need. It may not be very precise but is good enough for me. The minimum you can go is 1/6th of a turn. I have not calibrated how much linear movement it gives .

Q: 2. Will this work with the sony a99 ?

A: I don't personally own an a99 but i wouldn't see why not. Its big enough for 7D mark ii.

Q: 3. Will this work with a Manfrotto MV500AH Video head? I want to screw this one to the included Manfrotto PLONG plate, so that I can have an Arca Clamp to attach my cameras. Please advise

A: If you're screwing this into a PLONG plate, it will work. If you want an integrated 501-style with an arca-clamp, try this ProMediaGear plates: https://bhpho.to/3ryJpFM (501-short) https://bhpho.to/3BDT5U5 (501-long)

Q: 4. Is this plate compatible with the Manfrotto 504PLONG? I have a Manfrotto MVH502AH video head and would like to be sure I can use it on that head. Thank you

A: Yes and no. the RS2 (and by extension this Really Right stuff substitute) is compatible with with Manfrotto tripod heads but it is more difficult to use than normal Manfrotto plates. It mounts from front to back instead of back to front. The fact that it mounts in the opposite direction makes it awkward to get the quick release plate on and off your tripod. the safety mechanism can get caught leaving your camera stuck on the tripod and requiring force to remove it. Yes the plate will mount on your tripod but it will be more difficult to get it on and off your tripod than a normal manfrotto quick release plate.

Q: 5. is there a system that supports more than 3 lights?

A: Yes you can add extra Pantographs to this system

Q: 6. Will this work with RRS L brackets?

A: Yes, the Really Right Stuff DJI Ronin S2 CL Rail is compatible with the Really Right Stuff L brackets.

Q: 7. What lights would you recommend to purchase with this rail system?

A: The correct light you can use would depend greatly on what you are shooting. For suggestions on which lighting kit you can purchase, please e-mail your inquiry to askbh@bandh.com.

Q: 8. Does it fit ZHIYUN Weebill/S ?

A: This fits the DJI RS2 and RSC2.

Q: 9. Will this product work with the Kessler Kwik Release system?

A: Unfortunately, we are not able to test the compatibility of these items. Therefore it is our opinion that since both the Sunwayfoto DPG-3016R and the Kessler Kwik Release system are Arca-Swiss compatible they should work together without issue.

Q: 10. Does this kit include any cable management solution?

A: This come with three sets of item # FF3226 which is a set of five cable runners, so you get 15 cable runners in total.