Designed to run within the AmpliTube Custom Shop plug-in, IK Multimedia Ampeg SVX 2 offers a collection of bass amplifiers and cabs that emulate the world-renowned and well-regarded sound of Ampeg amplifier heads, as well as their matched speaker cabinets. This software download primarily intended to be used with electric basses, though it has been known to sound good on guitars, keyboards, or any signal to which you'd like to lend the sound of a bass amplifier.

Ampeg SVX 2 employs the company's Dynamic Interaction Modeling technology to recreate the fine interactions of the complete internal circuit stages of three hardware amplifiers and to reproduce their unmistakable vibe and dynamics down to their finest nuances. You can further customize your bass sound using the AmpliTube Custom Shop's full-rig signal path, with tuner, pedalboards, amp head preamp, effects loop, power amp, speaker cabs, mics with room effects, and post-rack effects.

Licensed Emulation of Ampeg Amps & Cabs    3 Amp Heads, 3 Matched Cabinets    Dynamic Interaction Modeling Technology    Works with AmpliTube Custom Shop Plug-In    Standalone, AU, VST2, VST3, AAX    Mac and Windows Compatibility

• Virtual gear collection for use with AmpliTube Custom Shop plug-in
• Officially licensed by Ampeg
• 3 x amps (SVT-VR, V-4B, and HERITAGE B-15N)
• 3 x matched cabinets (SVT-810AV, SVT-212AV, and B-15N 115)
• Accurate emulations of the original Ampeg amps and cabinets using the company's Dynamic Interaction Modeling technology
• Perfect companion for MODO BASS electric bass virtual instrument plug-in (available separately)
• Runs from within any version of AmpliTube 4.3 or later (free or paid version)
• Expandable via the AmpliTube Custom Shop

Related Questions and Answers

Q: 1. Can I know where is the product made?

A: Our current stock is from China.

Q: 2. Is it ok to store in the cabinet my camara lens inside their soft cases and pouches or will I negatively affect the moisture protection provided by the cabinet?

A: You can store the lenses in their cases, but it is not necessary when using this cabinet.

Q: 3. Can I stack another one on top? Any vibration from the cabinet?

A: Yes, No vibration of any kind from unit.

Q: 4. What mean the blinking blue drops? Does it stop blinking?

A: The blinking blue water droplet means that the unit is attempting reach the target humidity. For example if you set it at 40 rH then the LCD will have the flashing droplet until it reached the set humidity, and will turn off once it is reached.

Q: 5. How sturdy is the cabinet, can I store stuff on top of this? Any specification on what's the max load cabinet top can handle? I have limited real estate, so I tend to stack stuff vertically alot.

A: The top of the Ruggard Electronic Dry Cabinet (80L) is not designed for load bearing, and there have been no tests done to find a load capacity for the top of the cabinet. If you wish, you may try placing a 1/2-inch to a 3/4-inch piece of plywood on top of the unit to disperse or spread out the load of items placed on top of the cabinet, but we have no load capacity specifications for the top of the cabinet.

Q: 6. What are the interior dimensions of this (80L) cabinet?

A: 17.7 x 12.9 x 21.1 / 45.0 x 32.9 x 53.5 cm

Q: 7. I live in Florida and therefore when I take my camera outside it fogs up. If I use this, would it also warm it to at least 80° so there is not such a differential between Air Condition room and the outside?

A: No, this doesn't have a heater element to it, just a dehumidifier effect. It does basically keep the same temperature as the interior room it's placed in. For example: I live in Hawaii and the non-air conditioned room my Ruggard is in is currently 84 degrees F and 79% humidity. Inside the Ruggard unit itself, it says it's 82 degreees F and 42% humidity. So the temperature is basically the same, but the humidity level is drastically reduced of course. I understand what you are aiming for by preventing fog - one idea would be to place the Ruggard in an area where the air conditioning isn't used such as a Garage. If that's not an option, could go down the path of jimmy rigging the unit with a very small plug in heating coil device and fishing the cord out of a hole drilled into the back or peel away just enough padding from the door edge to fish it through. This COULD be a fire hazard so I would suggest finding the exact proper heating coil that's well insulated, and putting in small digital portable temperature display unit to keep an eye on the heat temperature/consistency.

Q: 8. Can this unit be left on 24/7? What is the power consumption?

A: As with appliances like a refrigerator, this product meant to maintain an environment, so there is no on/off switch. Many use a power strip or unplug when not using for extended periods. The power consumption would be 8 watts.

Q: 9. Will a d850 with a 500mm pf fit in the 80l

A: Yes, the Nikon D850 DSLR Camera and the Nikon AF-S NIKKOR 500mm f/5.6E PF ED VR Lens may be stored inside the Ruggard EDC-FP90L Electronic Dry Cabinet with Fingerprint Lock (90L) and the Ruggard EDC-80L Electronic Dry Cabinet (80L), B&H # RUEDC80L.

Q: 10. Can Two Axino Synergy Core USB Mics be used with one computer simultaneously for a streamlined podcasting setup?

A: Standardly, only one USB microphone may function with a computer at any given time, including the Antelope Axino Synergy Core USB Microphone with Built-In Microphone Emulations. The only microphone we are aware of that has been able to overcome this limitation is BH #RONTUSBMINI Rode NT-USB Mini USB Microphone, which allows connection of up to four mics into the same computer when paired with Rode Connect software.