Safely power your Sony Alpha a9 II, a9, a7R IV, a7R III, a7 III, a6600 camera, or other devices that take an NP-FZ100 battery with a D-Tap power source with this power regulated SafeTap Connector Cable with NP-FZ100 Type Dummy Battery from IndiPRO Tools. At 28" long, the cable has plenty of length to place your battery on a rig, and the power regulation supports input voltage from 10 to 28 VDC, outputting a consistent 7.9 VDC. The SafeTap protects your camera from a variety of faults such as reverse polarity, providing peace of mind.

D-Tap    Sony NP-FZ100 Type Dummy Battery    7.9 V Output

Built-in circuitry monitors for reverse polarity, overvoltage, undervoltage, and short circuits; prevents battery deep discharge

Related Questions and Answers

Q: 1. Hey just brought this cord for my A7sii and had it running from my camera to the tilta V mount plate and had a V mount battery on top of the plate. It worked the first few times i played around with it, and came back later in the day to turn my camera on, and it wouldn't turn on, i think its fried the camera. WHAT DO I DO?

A: I am sorry to hear about any issues you are having with this cable. If you have not done so already please email us directly at cs@bhphoto.com so we can look in to the matter further for you.

Q: 2. Does this work with A7siii?

A: Just to provide even more clarification due to conflicting answers: no, this will not work with the A7SIII. This model is for the A7II-generation and A6000-series cameras (except the A6600).

Q: 3. Will this adapter work with any V-mount battery with a D-tap and regulate the voltage for the Sony FX3?

A: Yes

Q: 4. Will this power an NP-F550 device? Specifically trying to fit it in this: https://www.bhphotovideo.com/c/product/1547309-REG/tilta_ta_sfh5_57_g_tiltaing_side_focus_handle.html/specs

A: No, this dummy battery will not power the Tilta PowerGrip Handle.

Q: 5. Doe you have a power supply that works with this connector?

A: Yes, we do offer a variety of power supplies that would work with this cable. Any 12v power supply of ours will be compatible with this cable. Here are 2 different options that would work:1) a href= https://www.bhphotovideo.com/c/product/1109311-REG/indipro_tools_pod144_power_pod_dual_lp_e6.html target= _blank https://www.bhphotovideo.com/c/product/1109311-REG/indipro_tools_pod144_power_pod_dual_lp_e6.html/a2)a href= https://www.bhphotovideo.com/c/product/1303049-REG/indipro_tools_dslpxlr_dual_sony_l_series_power.html target= _blank https://www.bhphotovideo.com/c/product/1303049-REG/indipro_tools_dslpxlr_dual_sony_l_series_power.html/a

Q: 6. Will this work with the power pod 14.4 volt station and covert to the appropriate 7.2 volts or should I use the 7.2 volt power pod?

A: You can do either way. However, I think I would lean to the two battery 7.2 because you get the ability to hot swap out a dead battery.

Q: 7. Will this power a Small HD indie 7 monitor through a smallrig v mount 99wh battery?

A: Yes, the IndiPRO Tools 2.1mm DC to L-Series Dummy Battery Unregulated Cable will power the SmallHD INDIE 7 Touchscreen On-Camera Monitor.

Q: 8. is there a way to run this with a normal quick charge power bank?

A: ive had success with both Xtpower banks off amazon. You will need a 2.5mm to 2.1mm adapter and add some copper in the center connector. The two indipro battery cables i ordered, the inner connector was deeper then the adapters and xtpower banks so it wasnt a solid connection and only worked sometimes. The copper fixed it and made it reliable. Worked great. ran the A7sII through hdmi for a live feed off a 20,000 milamp xtpower battery for 4hours and battery showed 73% left.

Q: 9. can i use this with an external battery 9V or 12V for my Sony a7s ?

A: Yes. you can. I have using the Varavon Tpower 12V and 16.8V and modify the convert it can power up the Sony A7s

Q: 10. Will this product work with my Indipro Quad Power Grid 4 Bay Dmwblf19 Battery Adapter For Panasonic Gh4, and connect to a Black Magic Design 4K Video Assist? There are two power cables out, so can I power the GH4 and the monitor?

A: This cable has only been polarity tested with the IndiPro Tools POWER POD Dual & Quad LP-E6 (7.2 & 14.4 volt) battery mounting plates. It may not work properly with other IndiPro Tools Power Grids.