The Pyle Pro PDWM2560.5 is a Premier Series wireless handheld microphone system offering a budget-friendly solution for houses of worship, clubs, educational institutions, and conference centers needing to accommodate two singers, presenters, DJs, teachers, or participants.

The PDWM2560.5 comes with a dual-channel tabletop receiver and two wireless handheld microphones. With their dynamic capsules and feedback-inhibiting unidirectional pickup patterns, the handheld mics are perfect for vocalists, DJs, public speakers, and hosts.

The receiver's per-channel volume controls and two independent XLR outputs allow simple level adjustments and proper hookup to separate inputs on a mixing console or multitrack recorder. The receiver is powered by an included power adapter, while the transmitters run on AA batteries (also included) and are rechargeable via the receiver's built-in charging docks.

For Two Singers, DJs, or Presenters    2 x Wireless Handheld Microphones    Dual-Channel Tabletop Receiver    Built-In Microphone Charging Docks    16 Selectable UHF Channels    Adjustable Volume per Channel    Dual XLR Outputs and 1/4" Output Jack    Two Detachable Antennas    Operating Range up to 175'

The wireless handheld mics are ideal for vocalists, DJs, presenters, hosts, and audience members. They feature integrated grilles to reduce breath sounds and protect the cartridges. Their power switches double as mute buttons for easy signal control at the mic. The mics rely on unidirectional polar patterns to reject off-axis sound and allow higher gain before feedback.

The tabletop receiver features two built-in receiver modules, each with a volume control, charging and AF level LEDs, a backlit LCD screen, and a balanced 3-pin XLR output. An unbalanced 1/4" mixed output is also provided for routing a blend of both channels to a single input on a PA system. The receiver's antennas are detachable for safe and compact storage. Built-in docks on the top panel of the receiver allow easy recharging of the included microphones.

• Operates in the UHF spectrum from 573 to 597.8 MHz, away from Wi-Fi and Bluetooth interference
• Supports a maximum range of 175'
• Manual transmitter/receiver syncing via up/down buttons
• Integrated noise filtration system
• Includes four AA batteries to power the wireless handheld microphones

Related Questions and Answers

Q: 1. I know theres a new one coming with the screen that would show levels and battery level. I think it will be the same but does this have a way to mute one?

A: No, the Synco WAir-G1-A2 transmitters do not have a mute switch to mute the audio while the wireless system is in use.

Q: 2. Can I use that mic with iPhone?

A: Yes, you can use the Blink 500 Pro wireless mic system with an iPhone. The system includes two receiver outputs cables for cameras and mobile devices. Use the 3.5mm TRS to TRRS cable combined with a Lightning adapter like the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) which will convert the TRRS plug to Lightning and allow the receiver to connect with your iPhone.

Q: 3. How quickly do the transmitter units recharge? If I'm on a 12 hour shoot with an hour lunchbreak in the middle, will the transmitters recharge sufficiently in that time to last the last half of the day? In other words, how quickly does the box fully charge the transmitters and receiver?

A: Recharging time for the built-in batteries inside the transmitters and receivers takes approximately 3 hours. The batteries can run for up to 8 hours. If needed, the transmitters and receivers can be powered by portable USB power banks (the same type you would use to charge a smartphone or tablet while on the go. The transmitters and receivers all have microUSB charging ports on them and can be charged while in use or when they are away from the case.

Q: 4. Can I feed this into an XLR in on a camera with an adapter?

A: Yes, you can use the 3.5mm TRS to TRS receiver output cable along with an XLR adapter such as the Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter (B&H# KOAXMMF) or Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H# ROVXLR).

Q: 5. Is it an useable 1 receiver to make more than 2 transmitter ?

A: No. 2 Person is the limit.

Q: 6. Would incorporating higher-quality lav mics significantly improve the sound quality with this system?

A: Yes. Upgrading the lavalier microphones can help to improve the quality of the audio delivered by the Saramonic Blink 500 Pro B4 2-Person Digital Wireless Omni Lavalier Microphone System. The lavalier microphones that come included with the system are the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (B&H # SASRM1).

Q: 7. hi there! Does anyone know what exactly comes in the box? Are there lab mics included? Thanks:)

A: Yes lavalier mics are included. You can find the full list of items listed in the 'In The Box' section of the product page, located on your far right-hand side of the Overview Tab. 2 x Transmitters (TX) Receiver (RX) 2 x Lavalier Microphones 2 x Microphone Wind Muffs 3.5mm TRS to TRS Output Cable 3.5mm TRS to TRRS Output Cable for Smartphones USB Type-C Charging Cable Limited 1-Year Warranty

Q: 8. Can you control the volume/gain of a channel/transmitter individually? If so, is the control on the transmitter or receiver?

A: Yes. If you have two transmitters and one receiver, each transmitter volume can be adjusted independent through the receiver.

Q: 9. Can you plug line level into the transmitter input?

A: Yes, the Blink 500 Pro transmitter can accept a line level input.

Q: 10. Are these mono or stereo?

A: The output from the receiver is dual mono. The connector is 3.5mm TRS and sends a combined signal with both mics to your camera or recorder. The audio is the same on the left and right sides.