Convert a single LC fiber signal to 12G-SDI output using AJA's FiDO-R-12G-ST Single-Channel ST Fiber Converter. This compact converter supports video resolutions up to 4K60 and has a maximum transmission range of 6.2 miles. It features auto reclocking at select rates, one locking ST optical fiber input, and two 12G/6G/3G/HD-SDI outputs.

1 x ST Fiber Input / Dual SDI Outputs    Transmits 4K60 up to 6.2 Miles    Auto-Selection Reclocking    Meets All Relevant SMPTE Specifications    Locking Power Connector    Includes 5-20V Worldwide Power Supply

Enables cable runs up to 6.2 miles using standard single-mode fiber optic cable

The locking ST barrel provides a secure connection ideal for live event, field production, and mobile environments

Dual, matching 12G/6G/3G/HD/SD-SDI BNC outputs

Small enough to fit behind a monitor, at the back of a rack, or directly on a camera rig

Related Questions and Answers

Q: 1. We have a BMD VideoHub that we use to route feeds to a video wall. The video wall performs best and prefers 720p. We occasionally have speakers who want to connect to the videowall using a laptop. Can the Teranex Mini HDMI to Optical 12G down convert laptop feeds into 720 reliably? I see I can force 1080 or 4K, but can I force downconversion out of the unit so the the SDI or Fiber port out are sending 720?

A: No, the Teranex Mini does not down convert video signals.

Q: 2. Does the Teranex Mini scale the output?

A: No, this Teranex Mini model doesn't scale the output.

Q: 3. Is there any audio processing that can be done with the unit? For instance, compression?

A: No, the Blackmagic Design Teranex Mini Audio to SDI 12G Converter doesn't provided any audio processing other than gain control.

Q: 4. Can I use this unit to monitor 3 SDI- HD-Signals and one UHD-Signal to a single monitor. And if so, can I use the buttons to go to a fullscreen view of one of those signals?

A: No, the Blackmagic Design Teranex Mini SDI to HDMI 8K Converter and Monitoring Solution will accept a single input. The four SDI inputs on this device are used to gang four SDI connections for 8K monitoring.

Q: 5. What is the ethernet port for on this unit?

A: It allows you to connect the Teranex Mini to a network. Connecting the Teranex Mini to a network will allow you to control the unit remotely from a computer.

Q: 6. What can the xlr ports be used for on this?

A: The X lr are to be used with external digital or analog audio. Also the ‘R’ channel XLR connector can be used for timecode.

Q: 7. What's the difference between the teranex mini and Blackmagic's other converters like the mini and micro converters?

A: These are more meant to be permantely installed in an IDF or rack instead of the micro converters which are more for behind monitors, on carts etc. They can also be remotely controlled via ethernet while the simple micro converters cannot.

Q: 8. Can this be used to automatically calibrate an LG consumer OLED display?

A: The Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR Converter does not have a HDMI connection. However, you can use HDMI to SDI converters. Yes, the Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR Converter could work and calibrate a connected display. Please note you will also need a colorimeter like the following model. Calibrite ColorChecker Display Plus BH #CACCDIS3PL Blackmagic Design Micro Converter HDMI to SDI 12G with Power Supply BH #BLMCHS12PSU

Q: 9. If you buy the quad to 12G and 12G to quad, can you send 4 independent 3G video signals on one 12G RG6 cable?

A: It will not work this way. The four signals must be part of a single signal.

Q: 10. Can I use this to send an output feed to a 3g sdi monitor?

A: Yes it can as long as the video resolution/frame rate that you are sending into this product is supported by 3G SDI.