This two-in-one HDMI/USB Type-C Right-Angle Adapter from SmallRig allows you to redirect both the HDMI and USB Type-C ports on your Blackmagic Pocket Cinema Camera 4K around the side of its camera cage or bracket to the back of the camera.

The formfitting adapter is molded from PVC with stainless steel components to precisely fit the ports on the 4K camera. It features HDMI and USB Type-C male plugs on the camera side and HDMI and USB Type-C female plugs on the other end. It mounts onto the cage or bracket using the included thumbscrew. An Allen wrench is included for tightening.

For Select SmallRig Cages and Brackets    Right-Angle HDMI/USB Type-C Adapter    Female-to-Male HDMI and USB Type-C Ports    Mounts Using Thumbscrew    PVC and Stainless Steel Construction

Blackmagic Pocket Cinema Camera 4K only

SmallRig cage or L-bracket 2203, 2203B, CVB2254, CVB2254B, CVB2255, CVB2255B, and 2766

Related Questions and Answers

Q: 1. Will this fit on Manfrotto 502 plate?

A: Yes, this is compatible Manfrotto 501PL style plates. The Manfrotto 502 heads are compatible with that style of plate.

Q: 2. Does it work with Viltrox speedbooster as well?

A: This is designed for Metabones Lens Adapters and may not work with other brands. We do not recommend it.

Q: 3. Can this fit other non small rig manfrotto plates?

A: This will only accept plates that are Manfrotto 501PL style on top, and mount only onto Arri Dovetail style plates.

Q: 4. Could this attach directly to a small rig 2203 cage or would I need to get a 501PL plate separately?

A: Yes, the SmallRig 501PL-Compatible Baseplate for BMPCC 6K and 4K will attach directly to the SmallRig Full Cage for Blackmagic Pocket Cinema Camera 6K/4K.

Q: 5. What else do I need to attach this to a Manfrotto tripod that uses a 501PL plate? I ordered this, but confused on how this attaches to the tripod. Do I need to get a dovetail plate?

A: You will need a dovetail plate in between the tripod plate and Smallrig Baseplate.

Q: 6. Will this work with bmpcc 6k and the manfrotto MVH500AH (https://www.bhphotovideo.com/c/product/1022509-REG/manfrotto_mvh500ah_flat_base_fluid.html)?

A: Yes the SmallRig 501PL-Compatible Baseplate for BMPCC 6K and 4K is compatible with the BMPCC 6k and it is also compatible with the Manfrotto MVH500AH Flat Base Fluid Head. You would attach the tripod plate to the bottom of the SmallRig 501PL-Compatible Baseplate using the tripod's 1/4 20 screw, or it's 3/8-16 screw, or ideally both if your plate has both.

Q: 7. Can this item work with the Sony FX3/30?

A: The SmallRig HDMI & USB Type-C Adapter for BMPCC 6K/4K Camera Cage/L-Bracket will not work with the FX3 and FX30. This product is specifically for use with the BMPCC 6K/4k Models.

Q: 8. What is the screw size for the sunshade? I need a replacement

A: The screw for the Tilta Half Sun Hood for BMPCC 4K Full or Half Cage is a manufacturer replacement part. Please contact the manufacturer. tilta [dot] com

Q: 9. Will this work w/Zcam F6 in 8Sinn cage (bottom ~8mm thick)? ...#’s look good. Currently 8Sinn bridgeplate, but it doesn’t engage safety catches front & rear of 12” Arri dovetail plate as 8Sinn plate dovetails too thin and shallow; not safe. Working with Wooden Universal Matte Box, Xeen Primes, Vmount attached to rear of cage via Nitze mount, Ninja V + Zacuto Kameleon, (all from B&H thank you!)... so a fair load on good ole O’Connor 50 head. Difficult to find a good sled...any recommendations? Looked at Arri’s & everything you’ve got but Zcam is too tiny. At least it was when I started!

A: This is designed specifically for the Blackmagic Pocket Cinema Camera 4k and 6K along with select SmallRig Cages. We do not recommend it for use with the ZCam F6.

Q: 10. Can I put this on a regular tripod or I need a Dovetail?

A: While the bottom is shown on a Arri type dovetail plate, the bottom of the SmallRig 15mm LWS Baseplate also has 1/4"-20 and 3/8"-16 tripod threads so you can attach it to any tripod.