The USB to L-Series Dummy Battery Cable from GyroVu allows you to use an optional 5V USB power source to power a camera or accessory that uses a Sony L-series battery. The dummy battery features a 40" cable with a USB Type-A connector. Battery status is passed to the camera using a built-in emulator chip. A 5V USB power supply is included with the dummy battery.

The USB power source should provide at least a 2A output. Note that USB ports on computers deliver only 1A, and many common USB power banks and power adapters are also limited to 1A, so a using separate power adapter is recommended.

Power L-Series Devices with a USB Source    40" Cable with USB-Type A Connector    Power Supply Included    5V Input, 2A Output Current

Cameras or devices that use a Sony L-series battery
5V USB power sources with a minimum of 2A output (3A recommended)
GyroVu High-Power 3.1A USB Power Supply
GyroVu High-Capacity 30,000mAh Power Bank
GyroVu High-Capacity 40,000mAh Power Bank with 110V Inverter

Related Questions and Answers

Q: 1. Will it work with Z6 and Z7 cameras?

A: It will work on the Z6 and Z7 camera as long as the USB power adapter/supply has enough power supplying it. It is recommended to use a 3amp.

Q: 2. Will this work using a power bank as power source?

A: Yes, this will work with a power bank.

Q: 3. The product photo appears to show the cable coming of the back of the dummy battery. Does this fit up inside the BMPCC 6K Pro?

A: No, the Core SWX PowerBase EDGE Sony L-Series Dummy Battery Cable for BMPCC 6K Pro has a cable with DC barrel that goes into the Core SWX PowerBase EDGE.

Q: 4. Would this plug into the DSLR 15mm Rod Clamp NP-F970 or F550 Battery Power Supply E6 Coupler??

A: Even if it fit I would not recommend using it in that manner. This is a unregulated adapter an you can easily fry a camera is the voltage is not correct.

Q: 5. How long is the cable?

A: We had the actual cable measured and the ZILR USB-C to Nikon EN-EL15 Dummy Battery Cable is 20" long. The total length is 24".

Q: 6. is there a way to run this with a normal quick charge power bank?

A: ive had success with both Xtpower banks off amazon. You will need a 2.5mm to 2.1mm adapter and add some copper in the center connector. The two indipro battery cables i ordered, the inner connector was deeper then the adapters and xtpower banks so it wasnt a solid connection and only worked sometimes. The copper fixed it and made it reliable. Worked great. ran the A7sII through hdmi for a live feed off a 20,000 milamp xtpower battery for 4hours and battery showed 73% left.

Q: 7. Is this adapter coiled cable?

A: Yes. The following item is a coiled cable.

Q: 8. Would this fit in a slot for a NP-F550 battery? (tilta focus grip)

A: Yes, the IndiPRO Tools 98PPC 24" 2.5mm to Sony L-Series Type Dummy Battery Cable will fit in a slot for an NP-F550 battery.

Q: 9. So this must be regulated right? I don't see that in the specifications. Is the power regulator inside the dummy battery? This info is usually in the description or specifications.

A: Although we have reports of this working properly, there's no mention from Tilta regarding its power regulation. A good regulated option is the BH #KODTSA7SDB: https://www.bhphotovideo.com/c/product/1592221-REG/kondor_blue_kb_dt_sa7s_db_d_tap_to_sony.html

Q: 10. Is this adapter compatible with the Panasonic ag-hpx170p?

A: Yes, the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery (8V, 8') should work with the Panasonic AG-HPX170 P2HD Solid-State Camcorder (B&H # PAAGHPX170).