Dual Output Bluetooth Transmitter

Surefire 6px Pro Dual-output Led Flashlight (black)

Product Code: ga202116
Availability: In Stock

$324.00 $453.60

Qty

8 reviews Write a review

Description
Reviews (8)

Equipped with dual outputs to give you the proper illumination for any job, the Surefire 6PX Pro Dual-Output LED Flashlight features a low output of just 15 lumens so you can use the light for close-range tasks, while the 600-lumen high output can be used for more light-intensive purposes. The polycarbonate reflector is micro-textured to maximize the width of the beam while providing a dimmer periphery ring to help maintain situational awareness. A click-type tailcap switch provides access to both beam intensity levels, plus momentary and constant-on illumination modes. The aluminum housing is Mil-Spec hard coat anodized, with O-ring and gasket seals for reliability in wet or rainy weather.

15/600 Lumens White LED Emitter 1.25" Diameter Bezel Click-Type Tactical Tailcap Switch Momentary and Constant-On Modes Anodized Aluminum Housing Micro-Textured Reflector Weather Resistant Made in USA

General
Lumen Output	2 Levels: 15 to 600 Lumens
Illumination Source	1x White LED
Weapon Mountable	No
Power
Estimated Runtime	CR123A : 1.5 to 52 Hours
Battery Type	2x CR123A
Physical
Lens Material	Polycarbonate
Material of Construction	Aluminum
Environmental Resistance	Water-Resistant (Unrated)
Impact Resistance	Drop-Resistant (Unrated)
Bezel Diameter	1.3" / 3.3 cm
Dimensions	L: 5.2" / L: 13.2 cm
Weight	5.2 oz / 147 g (With Batteries)
Packaging Info
Package Weight	0.45 lb
Box Dimensions (LxWxH)	9.9 x 4 x 1.5"

15-lumen low output is ideal for close-up tasks and preserving battery power
600 lumens for more light-intensive uses
Single white LED
Polycarbonate micro-textured reflector delivers a wide beam with generous spill to maintain situational awareness

Location: Tailcap
Type: Tactical push-button switch for easy access
Momentary or constant-on modes
Press for momentary low, click for constant-on low, return to off, then press or click again for high

1.25" diameter bezel
Aluminum alloy housing is lightweight and durable
Mil-Spec scratch-resistant hard coat anodized finish
Weatherproof, O-ring and gasket sealed
Shatter-resistant polycarbonate LED emitter window

Related Questions and Answers

Q: 1. Does this monitor support third-party calibrarion software, like Portray Displays Calman?

A: The Shimbol Memory 7 Pro 7" Touchscreen 4K HDMI/3G-SDI Recording Monitor with 3D LUT Output comes color calibrated from the factory. However, it does not support color calibration by the end user.

Q: 2. I want to use this for photographing 24" x 36" maps. Will this be a good choice for this purpose?

A: No, the following unit will accommodate a maximum document size: 16 x 20".

Q: 3. Which accessory should I buy if I want to use an iphone instead of a regular camera?

A: The Magnus STA-150B Smartphone Tripod Adapter with Screw Clamp, BH # MASTA150B can connect to the camera mount of this copy stand. https://bhpho.to/3CiZALN

Q: 4. Will this charger work to charge the FirstPower V Mount/V-Lock Battery 60wh and/or other v mount batteries?

A: No, the Genaray Dual V-Mount Battery Adapter for Endeavor 150W LED Monolight is not a V-Mount battery charger. This is the battery solution for the Genaray Endeavor 150W LED light. It will allow you to use V-Mount batteries on a LED light that was only AC powered.

Q: 5. What kind of cameras are compatible with the copy stand. And does it come with an attachment that’s versatile with any DSLR?

A: The Impact Pro Copy Stand with Dual LED Panel Light Kit has a load capacity of 8.8 lb. and is suitable for use with compact and mirrorless cameras, DSLRs, video cameras, and more depending on the weight including the lens. This stand accommodates most DSLR by mounting to the 1/4-20 thread screw.

Q: 6. Can I use these lamps with 220V voltage?

A: Yes, the input power for the Impact Pro Copy Stand with Dual LED Panel Light Kit is 100 to 240 VAC, 50 / 60 Hz.

Q: 7. If I need a replacement for lighting, can I find it at regular in-town shops? What kind of lamps is used for this stand?

A: These are LED lamps so they will last 30,000 hours.

Q: 8. will it work with GVM SD300B?

A: The GVM Pro SD300B Bi-Color LED Monolight (300W) has proprietary cables that will not fit with Genaray Dual V-Mount Battery Adapter for Endeavor 150W LED Monolight; we suggest the GVM V-Mount Battery Plate Adapter for SD300 Series LED Monolights (https://bhpho.to/3wnBeTF).

Q: 9. Does the on board recording gets triggered by the camera? And if so, which brands (ARRI, RED, Sony...)?

A: The Shimbol Memory 7 Pro has HDMI Trigger support. If your camera supports HDMI trigger/timecode, it will start recording as the camera records. Please see page 15 of the manual for more information: https://bhpho.to/3W6pjnt.

Q: 10. I want to scan 35mm negatives. Will this work for that?

A: The Impact Pro Copy Stand with Dual LED Panel Light Kit as it is, is for flat art items coping. It will not work unless you add other items to copy film. Like adding these two items, https://bhpho.to/3Y4TR6K and https://bhpho.to/41nAMiW .

anyonymous	25/08/2024
Excellent small LED flashlight. Very bright on high setting. Has dimmer second setting for uses when max brightness is not needed/desired. 5

Mark	21/08/2024
I have one of these in every camera/gear bag I own. They're small, bright, and use interchangeable AA batteries. What more can you ask for? 5

Mark	28/07/2024
It uses a replaceable AAA battery. It's tiny. It's bright. It's sturdy. I have zero complaints. I loved my first one so much, I bought four more so I can have one in every camera bag I own. Well done, Pelican! 5

William	26/07/2024
The Pelican 3rd generation 1910B LED flashlight puts out a bright narrow beam. Light is even thanks to the LED bulb. The attached clip makes it easy to place on the bill of my cap, or in my shirt pocket or pants pocket. It's only 3 1/2 inches long and about a 1/2 inch in diameter so it's an easy carry in a purse or pocket. I carry it in my camera bag for night shooting, it's narrow beam is ideal for checking what settings and buttons I'm pushing. Takes a single AAA battery and has a diagram on the side of the battery cap to remind you how to insert the battery. The aluminum body is light weight and durable. The push on and off button is conveniently located at the back of the flashlight and the whole unit works in a downpour. 5

Louis	18/07/2024
Very compact and bright, the best part is it uses only one AAA battery. So, I brought two. One for my dad, and the other one I keep in my camera bag. Love it! 5

Walter	09/05/2024
I ordered this for my wife for her to carry in her purse. It's small, brightly colored and easy to use. Most importantly, it shines more brightly than the one she already had, and it's smaller. So, it's a winner all the way around for us. 5

Landon	23/04/2024
I purchased this to replace my 2 AA cell Maglite that I carry on my belt. I wasn’t sure how big this light would be, but I was very pleased when it arrived. It is about as thick as a sharpie marker but only 2/3 as long. It clips nicely to my Leatherman holster. It is also MUCH brighter than my Maglite. 5

Kevin B	02/04/2024
This light is amazing. It works on a single triple A battery and can light up the path in front of me, dark parking areas, entryways that are normally pitch dark become daylight with this light 5