The 1916 16 x 9 Bi-Color LED Panel from Alzo is a high-intensity LED panel offering superior brightness and a broad spread of light with a high CRI of 93. This bi-color LED panel has a color temperature range from a warm 3200K tungsten to a cool, crisp 5600K daylight. The built-in control knobs and LED display panel make it easy to set the output tone and brightness to match or accent any lighting conditions. It can also be controlled and daisy-chained via its integrated wired DMX input and output ports.

The chassis is an aluminum passive heat sink, providing fanless, silent operation at all brightness levels. It has powerCON AC power pass-through connectors, and it can also be operated via a user-supplied Sony V-mount type battery. This efficient LED panel is ideal for studio and lighting grid applications. It includes a standard mounting yoke and 4-leaf barndoors to control and contour light output and prevent unwanted spill.

For Film, Broadcast & Video Production    Output: 7000 Lux at 3.3' (60°)    3200 to 5600K; Bi-Color Control    16 x 9.5" Panel; AC/DC Operation    CRI: 93    Onboard & Wired DMX Control    Passive Cooling    Includes 4-Leaf Barndoors    Includes Yoke with 5/8" Pin Receiver

Very bright, broad 3200-5600K bi-color output with a CRI of >93.

Adjust the LED light output through 256 stepped levels of brightness for precise, repeatable setups. Adjustments can be made locally using the onboard touchpad or remotely using DMX512 remote protocols. The 3-pin XLR DMX in and out connectors allow lights to be daisy-chained for studio setups.

The rear panel is a large aluminum heat sink to maintain a low temperature for silent, fanless operation.

Related Questions and Answers

Q: 1. Is it AC also and does it come with a battery?

A: Yes. As indicated under the “In The Box” section under the Overview tab on our website for the Dracast LED500 Silq Bi-Color LED Panel B&H # DRS500B, the following items are listed as included by Dracast with the purchase of the light panel: In the Box Dracast LED500 Silq Bi-Color LED Panel • AC Adapter • Soft Nylon Carrying Case • V-Mount Battery Plate • Limited 1-Year Warranty As indicated, the AC adapter is included with the light panel. While a V-mount battery plate is also included with the unit, the V-mount battery and battery charger would have to be purchased separately for location DC power usage needs. There are V-mount battery options listed under the Accessories tab on our site as recommendations for use with the above light fixture.

Q: 2. in india we have240v 50hz will your adaptor do this?

A: The unit is for use on US 110v power. You will need to use caution if you attempt to use a adapter not all are capable of delivering the correct power in Volts and Hz.

Q: 3. Can GVM confirm these fixtures emit 5600K ?

A: Color Temp.: 3200-5600K, CRI/TLCI: 97

Q: 4. Is it good for filming white and colored diamonds and jewelry on the model? I need it to really sparkle and don't change the color of the stones. Please advise if there is something else you can recommend or this light is enough.

A: Yes, you could use the GVM MB832 Bi-Color LED Light Panel (B&H# GVMB832) as a light source for photographing models wearing jewelry. While models may be photographed in either hard or soft light, it is especially soft light that is typically preferred for photographing jewels. For that you'll need the appropriate soft box. In this case that would be the GVM Softbox for 672S, MB832, 50RS, 520LS, 520S, and 1200D LED Panels (B&H# GVSOFTBOX600): https://bhpho.to/2Vlopaa Please note that the sparkling (technical term: scintillation) of a diamond can be hard to capture visually without actually shooting video (as opposed to still photos), and in such a case hard light would be used. However, if you want to use hard light then you'll want to use a single source COB LED ight such as the Genaray PortaBright Daylight LED Battery Powered Monolight (B&H# GEMLACDC): https://bhpho.to/2Vt4w0q

Q: 5. Do these come with the stands? Some photos have them and others do not.

A: Yes. The following items are listed under the "In The Box" section under the Overview tab on our website as included by the manufacturer with the purchase of the GVM 560AS Bi-Color LED 2-Panel Kit, BH # GVM560AS2L: In the Box GVM 560AS Bi-Color LED 2-Panel Kit 2 x 560AS Bi-Color LED Panel 2 x AC Adapter 2 x Sets of Barndoors 2 x Diffuser 2 x Light Stand Carry Case Limited 1-Year Warranty As indicated, two (2) light stands are included with the purchase of the GVM 560AS Bi-Color LED 2-Panel Kit.

Q: 6. Does anyone know the R9 value at the top and bottom of the temperature range?

A: Unfortunately, GVM does not indicate the R9 value of the GVM 560AS Bi-Color LED Studio Video 2-Panel Light Kit.

Q: 7. How heavy is each light without the stand? Weight please.

A: Each light would be just under 5 lbs.

Q: 8. Are these the largest LED panel lights in this GVM family? Is there anything more powerful? Thanks!

A: If you are looking for the strongest LED light panel from GVM, I would recommend the GVM MX 150D Bi-Color LED Studio Video Light Panel, B&H # GVMX150D, followed by the GVM LT100S Bi-Color LED Light Panel, B&H # GVLT100S.

Q: 9. how many wattage do they have ??

A: Each panel has a 30 watt draw.

Q: 10. Does this come with the batteries?

A: They do not.