Mount your compatible 20 to 45" flat-panel display weighing up to 77 lb and achieve your preferred viewing angle with the Gabor FSM-S Full-Swing Small Wall Mount. It supports flat displays with select VESA patterns from 75 x 75 to 200 x 200mm and provides -15 to 10° of tilt adjustment and up to 180° of swing to help you achieve your viewing angle of choice, then retract to the wall to keep your display out of the way. Integrated cable management helps keep your wiring neat. The included bubble level helps simplify installation, and the mounting template features a dust pocket to catch the debris produced from drilling.

For 20 to 45" Flat Displays up to 77 lb    75 x 75 to 200 x 200mm VESA Support    1.8 to 20" Arm Extension    180° of Pivot Adjustment    -15 to 10° of Tilt Adjustment    ±3° Post-Installation Leveling    Cable Management & Decorative Covers    Hardware, Template & Level Included    Rugged Steel Construction

The quick-hang installation allows a single person to attach the mount to the concrete or wooden stud wall and simply hang your display on the mount.

The swing-arm extension allows you to pivot your display up to 180° and extend your screen from 1.8 to 20". Position your display away from the wall, around corners, and over objects. Enjoy the flexibility of mounting your display on nearly any wall and always achieving the perfect view.

Tilt your display -15 to 10° for optimal viewing. By tilting your display, you can eliminate screen glare and get a more comfortable viewing angle.

After you mount your display, you can alter the horizontal level ±3°. This ensures easy and accurate installation with simple adjustments for proper placement.

Integrated cable management keeps your cables hidden and offers a clean look. Slip on the cable covers and run the cables through to keep them out of sight.

Covers help hide the installed hardware, allowing the mount to blend in with nearly any room. They are easy to slide on and off when attaching or removing the mount.

The provided mounting template allows you to confidently mark and drill holes for mounting. A convenient dust pocket catches debris and helps minimize cleanup.

Related Questions and Answers

Q: 1. Can it fit Nikon D750 with AF-S NIKKOR 24-120mm f/4G ED VR Lens, without removing it?

A: Yes, as all compartments are removable.

Q: 2. Can I fit a Nikon Z9 with 500 PF attached plus Z100-400?

A: The Nikon Z9 with the Nikon AF-S NIKKOR 500mm f/5.6E PF ED VR Lens and lens adapter will not fit in the Ruggard Lynx 45 SlingPack for DSLR and 13" Laptop (Black, Small). You would need a much larger backpack for that.

Q: 3. Do these batteries work with other v mount chargers?

A: LiIon batteries (even more than other rechargeable batteries) need very careful charge monitoring to avoid the danger of overheating and fire/explosion. Ideally every lithium chemistry battery should only be charged using the chargers from the specific battery manufacturer as most have proprietary circuitry which may not be compatible with chargers from other makers.

Q: 4. Could I also carry a 13 laptop in here along with a DSLR and lenses?

A: I finally found this backpack. It does not have a computer slot though I did test my 13 laptop in the large lens compartment side without lenses in the pack. With an ultra slim hard case it is possibility that it could fit.Hope this helps-

Q: 5. How much does the unit weigh (not including case)?

A: The soft box and bracket without flash weighs approximately 1.2 lbs.I Hope that helps.Mike

Q: 6. Does Canon encodes the distortion data as well? Is it XD lens data?

A: Quoting the canon page on the lens data for the Canon CN-E 45-135mm T2.4 LF Cinema EOS Zoom Lens , "The Flex Zoom series lenses are compliant with a wide range of communication standards thanks to the versatile lens-to-camera communication function including Cooke /i Technology™ (PL mount) and EF mount. This will enable you to display or record lens metadata as well as utilize camera functions such as aberration correction, peripheral illumination correction and focus guide function with compatible cameras."

Q: 7. Can this back pack fit a 13 inch laptop, a 11.5 inch tall binder, 1 lens and 1 canon t6 rebel?

A: When using the Ruggard Lynx 45 SlingPack for DSLR and 13" Laptop, a 13 inch laptop that is not too thick will fit, but not for a 11.5 binder, (it is too thick).

Q: 8. Hi Dennis A L. if this is for 1303 Studio Production Monitor. Why does it says (Use the SmallHD RapidRail Mount for 1/4"-20 Accessories to quickly secure 1/4"-20 accessories to 1300, 1700, 2400, or 3200 series monitors)?

A: The 1303 is part of the 1300 line up. It is compatible

Q: 9. Can you reconfigure the compartments in the bag so the camera body is kept at the base and not the top of the bag? That seems bad for balance....

A: Not really because interior gets shallower the closer you get to the top of the bag. As such, you can't just turn the center dividers around because they're cut to accommodate the changing depth of the interior.

Q: 10. My 15.6" HP x360 is 15" x 9" x 1". This bag says it will only hold laptops up to 13" in diagonal size, but the laptop compartment is stated as being 17" x 10" x 1". Will my 15.6" laptop fit?

A: According to the manufacturer, the laptop compartment of the Ruggard Lynx 45 SlingPack for DSLR and 13- Laptop (Black, Small) is designed for laptops with a 13-inch diagonal screen. The laptop compartment is usually designed to be slightly larger than the computer to make it easy to insert and remove the laptop from the laptop compartment. From your measurements, it does appear your laptop would physically fit inside the laptop compartment in the above SlingPack. However, do note it may be more difficult to remove the laptop from the compartment compared to a laptop with a 13-inch diagonal screen.