This 72-pack of 15" x 650' rolls of HP 20 lb Bond Paper with ColorPRO Technology is compatible with HP PageWide XL printers and designed for high productivity environments. The rolls feature a 3" core, basis weight of 75 gsm, and thickness of 4 mil. The ColorPRO aspect of the paper refers to additives that interact with pigment inks to keep lines sharp and increase contrast. With a normal matte finish, the paper dries near-instantly and has a brightness of 92% and opacity of 88%.

Compatible with HP PageWide XL Printers    Basis Weight: 75 gsm    Thickness: 4 mil    Brightness: 92%    Opacity: 88%    Instant Drying at Room Temperature    Surface Finish: Matte    Core Size: 3"

Related Questions and Answers

Q: 1. Will this work with other tripods with 75mm bowls? The Robus tripods, for example?

A: The 75mm bowl of the LV-7567 doubles as the mount for the Leveling Base so, in most cases, you will not be able to use the LV-7567 bowl with different makes of tripods. We have not tested the Leveling Base with different makers' bowls but there is a good chance that you could use the rest of the LV-7567, as long as the bottom opening of the bowl is at least 30mm in diameter.

Q: 2. Is it fit on nikon d5600?

A: Yes, but it is a manual lens

Q: 3. Instructions on how to attach to camera box?

A: You would need a T mount adapter in order to use the Opteka 650-1300mm f/8-16 Preset Telephoto Zoom Lens for T Mount on a camera. If you would like to know which adapter you could use, I would suggest sending us an email letting us know which camera you have. AskPhoto@bhphoto.com

Q: 4. Can I output balanced xlr to a PA and use the rca outputs at the same time for a local monitor?

A: Yes they are two separate outputs so they can be used at the same time.

Q: 5. Will this unit take a mono signal, and send it to both L&R outputs? Or do I need to split the signal into both L&R inputs?

A: You would have to send a signal into both left and right channels to get a left and right output. The Hosa Technology RCA Female to 2 RCA Male Y-Cable - 6", B&H # HOYCRF2RM can be used at the input to bring your mono signal into the unit.

Q: 6. Does this meter have auto power off? i.e. will it power down automatically if not used for a while? I see an "auto off" button on the faceplate but there's no mention of this feature in the description or in the manual I found online. I'd be using this in a university lab where students forget to turn meters off so we eat a lot of batteries.

A: No this unit does not feature an auto shut off, must be turn off manually .

Q: 7. This product description claims 30 degrees of correction in any direction. Is it truly 30 degrees in any direction or is it +/- 15 degrees?

A: It is certainly not 30 degrees of correction from level --- it doesn't seem to be even 15 degrees from level. But it may be a math issue in how it is measured. Perhaps from side to side might be more but I would be surprised if it is 30 degrees even from side to side.

Q: 8. I just need to raise the level of an unbalanced signal with RCA connectors. RCA to RCA but with higher level. Can I do it with this equipment?

A: Yes, the Rolls MB15b Promatch 2-Way Stereo Converter will raise a consumer level (-10 dB) stereo RCA audio signal to a balanced, full line level (+4 dB) output signal.

Q: 9. What XLR out cables are required?

A: This type will work: Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 3' (0.91 m), Black B&H # KOM4003

Q: 10. Can i use this on Sony A7R3 camera?

A: You definitely can. You just need to also buy this adapter if you don't already have it. https://bhpho.to/3p2CKns