The LX-1700/3 from RF-Video is a 1.7GHz audio and video transmitter designed for military applications in extremely low or high temperatures. It features 8 selectable agile channels and offers 3W of RF power allowing a 5 mile range over the air.

1.7GHz Extreme Temperature Transmitter    Designed for Military Applications    -40°F to 172°F Temperature Range    1730MHz - 1850MHz Frequencies    8 Agile Selectable Channels    3W of RF Power    5 Mile Range Over the Air    SMA Antenna Connector    RCA F Video Connector    WFM Modulation

• -40°F to 172°F temperature range
• 1730MHz - 1850MHz operating frequencies
• Operates between 12V and 16V
• SMA antenna connector
• RCA F video connector
• WFM modulation
• 3% video distortion

• VRX-1700
• VRX-1700T
• VRX-17LD with LCD display (supports 1700MHz - 2100MHz)
• RMX-2000 with LCD display (supports 900MHz - 2000MHz)
• RX-2000LCD TV Receiver (supports 1700MHz - 2000MHz)

Related Questions and Answers

Q: 1. Will this work with a Canon eos 4000d and a voking III FLASH?

A: Due to the lack of a center pin in the hot shoe of certain Canon cameras (e.g. 4000D, T100, SL3, and T7, among others), the Pluto RF Transmitter & Receiver for Canon Cameras (B&H# PLRFTRCAN) will not receive the sync signal from the camera to trigger a flash on (in the hot shoe of the transmitter) or off (in the hot shoe of the receiver) of the camera. If an economy-priced option is desired then we recommend the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Canon (B&H# GOX2TC) for mounting in the hot shoe of any of the aforementioned cameras or any other Canon camera with a pre-2022 hot shoe, or even in those of the most modern version of the Canon hot shoe on a camera such as the Canon EOS R50 with the Canon AD-E1 Multi-Function Shoe Adapter (B&H# CAOCSAADE1). The Godox X1R-C TTL Wireless Flash Receiver for Canon (B&H# GOX1RC) would be added to receive the signal off camera.

Q: 2. Do I need a special FCC permit to use this in the usa?

A: The LUV-250 video and audio transmitter uses the 2.4GHZ channel which is an open radio channel commonly used for many wireless devices. There is no need to have a special permit to make use of this channel in the US.

Q: 3. Is this what I use to connect my Canon V1 Speedlight to the Pluto trigger? My V1 doesn’t have a PC sync port which is needed, right?

A: You don't need a trigger with a PC cord Godox has a Remote trigger for canon B&H # GOX1TC This V1 has a built in receiver for Godox triggers.

Q: 4. Do y'all think the latency is fast enough to pull focus?

A: No, the DJI Wireless Video Transmitter does not provide stable enough signal to use for focus pulling reliably and with consistency of transmission.

Q: 5. Is it compatible with gopro hero 4?

A: This unit has RCA Composite Inputs for the video feed. It may be possible to use it with a GoPro Hero4 if you have the composite cables for the camera. They are B&H #GOACMPS.

Q: 6. can i use in URSA MINI 4k ?

A: Yes you can. The Ursa Mini 4K has a SDI output which you can use to connect to this wireless system.

Q: 7. Is there a sony L series battery option?

A: GyroVu D-Tap to Sony L-Series Intelligent Dummy Battery (30") BH #GYGVDTAPSL https://bhpho.to/2LMx3ao

Q: 8. How can i connect an cdmi cable to this device? Is there an adaptor?

A: You can use this Atomos Connect H2S Converter. It is great for a camera needing to be mobile. For permanent situations, you could use the KanexPro HDMI to 3G/HD/SD-SDI Converter.

Q: 9. Are these units water proof?

A: They are not. This is not a water proof product.

Q: 10. SMA or RP-SMA? How long is the cable?

A: This antenna is SMA male connector and it comes with a 10ft. wire.