Carry and protect your Sony PXW-FX9 camera in this Extra-Tall Rigid-Frame Carry Case from Porta Brace. With its extra interior width and height, this made-in-the USA case is tall enough to hold the camera when it is pre-built with a baseplate and select accessories, making it shoot-ready to save you breakdown and build time. This rugged 1000D Cordura nylon case features a semi-rigid padded foam frame, a waterproof bottom, and a dual, quick-zip top opening for easy access to your camera and accessories.

Additional features include four exterior pockets to hold a variety of accessories, dual top handles, and a detachable, padded suede shoulder strap. The Sony PXW-FX9 Case comes with a cinch strap and cradle to secure your camera within the case, a padded pouch, 4 and 7" lens cups, an 8 x 12" tablet pouch, a white balance card, and a combo carabiner/flashlight.

Holds Shoot-Ready PXW-FX9 & Accessories    Quick-Access, Dual-Zipper Top Opening    1000-Denier Cordura Exterior    Extra-Tall 13.5" Interior Height    Lightweight, Protective Foam Frame    Waterproof Bottom Layer    4 Exterior Pockets, Tablet Pouch    Shoulder Strap, Cradle, Sack, Lens Cups    Camera Cinch Secures Body in Case    Made in USA

• Easy-open, quick-draw design
• Interior width and height of 13.5" holds assembled, shoot-ready Sony FX9
• Semi-rigid foam-padded frame for maximum protection
• 1000-Denier Cordura nylon
• Anti-skid waterproof bottom panel
• Soft-loop fabric interior
• Customizable interior
• Four exterior pockets for SD cards, cables, and other accessories
• Dual top handles and detachable shoulder strap

Related Questions and Answers

Q: 1. what is the difference between the 1510 and ba22?

A: I have the 1510 and it is wonderful. I got the Tekpak divider system which is the best I have ever seen. The BA22 is optimized as an airline carryon. The latches, for example, are recessed so they don't stick out and get in the way. It has a pressure equalization valve to keep the pressure inside the same as cabin pressure. Etc.

Q: 2. What happened to the brake for this slider? I've had it in my wish list for a while, went to buy it and it's gone. Does B&H still sell the brake for this model?

A: I'm sorry to say that the Pocket Dolly V2 Brake is no longer available through B&H. You may want to consider contacting Kessler Crane directly to see if they still have that part available.http://bit.ly/260Feoh

Q: 3. is their a case available for this model? how much is it?

A: Yes, Porta Brace makes a great case for this slider. It is B&H#: POSLD41XTOR

Q: 4. can this slider be mounted on a single tripod for use with a dslr?

A: Yes, there is a center mount in the middle of the rail where you can attach it to a tripod. I recommend a sturdy tripod (with sand bags,) and a quality head to get the most stable performance from this. Otherwise, you can attach two short C-Stands with mounts on both ends of the slider. There are mounting plates with screw holes for that as well. It's a great slider!

Q: 5. Does this unit come with a case, if not what do you suggest Kessler Crane Pocket Dolly 3 Traveler? (27.5 )

A: No case. I got the KECS1090 Rigid Slider Case for a 39.5 standard Pocket Dolly. They have a case for the traveler - B&H # KECS1089/MFR # CS1089. Ours fits quite well. It's a good case. It is rigid, but not a hard case. Original shipment was damaged in transit due to a box puncture, but B&H replaced it quickly. I'd buy it again.

Q: 6. Will a Sony HXR-MC2500 camcorder fit in this case?

A: Not to sure how big the camcorder is - but unless it is a high-end professional model I would say: absolutely.Even a lot of professional/commercial hand helds would fit .

Q: 7. Can you add pick and pluck foam?

A: Yes you can here it is. https://www.bhphotovideo.com/c/product/330234-REG/Pelican_1510_400_000_1511_Four_Piece_Foam.html

Q: 8. will this slider take a Kessler Crane Second Shooter Bundle (3-Axis)?

A: Kate, B&H actually sells the V3 (which does take the second shooter). the only difference between the 2 and the 3 is that the 3 comes with a break on the camera mount already, where the 2 does not and you have to buy the brake separately. I've talked to them about changing the image and description for what they are selling right here but to no avail. Also e-mailing Kessler will assure you if they are compatible but my understanding is that they are indeed.

Q: 9. I want to shoot video of jewelry: macro and ECU & CU with my Nikon d700. I have a steady video tripod. I am wondering if this will work for smooth shots, vertical and horizontal mounting. Also, is there a motor with two or three axis moves avail? This is a two part question. Please share your thoughts and experience. Starting a jewelry photo/video business and have a lot at stake. Thank you mucho!

A: Kessler is one of the top brands for sliders, you will be able to get a very smooth shots with this unit and it can be set up vertically as well. They also offer motorized units, like the Second Shooter Bundle, that you can use for 3-Axis Motorized Slides.

Q: 10. Does TrekPak Divider Kit for 1510 fit Pelican Air (1535)?

A: No