Mount your 10 to 30" display just 0.5" from the wall with the Gabor FM-N Fixed Wall Mount. It supports displays weighing up to 55 lb with 75 x 75 to 100 x 100mm VESA patterns. Installation is designed to be easy and secure with the included bubble level letting you know the mount is properly aligned.

Supports 10 to 30" Displays up to 55 lb    75 x 75 to 100 x 100mm VESA Support    0.5" Mounting Depth    Steel Construction

The FM-N provides a near-flush mounting depth of 0.5", offering a sleek look for your display in your home or office.

The mounting hardware and steel construction help assure a firm, secure hold on flat-panel displays weighing up to 55 lb.

The FM-N supports displays with 75 x 75 to 100 x 100mm VESA patterns, making it compatible with a variety of displays weighing under 55 lb.

A protection screw helps minimize tampering with your mounted display. After installation, your display will hang securely as if one with the wall.

The included mounting hardware accommodates installation on walls with wood studs or made from concrete. With a few household tools, you can have your display installed and ready to watch. A mounting template with dust catcher makes it clean and easy to correctly install the mount to the wall.

The included bubble level helps you achieve proper horizontal alignment.

Related Questions and Answers

Q: 1. Is the Fresnel lens glass or plastic?

A: The fresnel lens is made of glass.

Q: 2. Is it compatible with Aputure LS 60D ?

A: Yes this can work on an Aputure LS60D with its Bowens adapter.

Q: 3. will this work with zhiyun molus g200?

A: the Impact Fresnel Spot S-Mount Attachment (10-40°) BH #IMLMFSA1040 is only rated for use with LED lights up to 100w.

Q: 4. Tell me this device will connect to the Aputure 120t? Is it real Bowens Mount ? Check my problem https://youtu.be/sohl8JVvB1M

A: Although a late reponse, this may help others. This will not work with the Aputure 120t without some sort of modification. The reason is that the mount is deeper than normal on the Aputure light. You would need the tube of the fresnel to be about 1/4 longer in order to work. You could modify the three tabs by filing perhaps to make it fit. This will fit on the Godox Speed Bracket and the Godox SL(B)-60 lights without any modifications.

Q: 5. Is this Impact fresnel spot compatible with the Impact 180Ws Monolight Starter Flash with LED Modeling Light?

A: The Impact 180Ws Monolight Starter Flash with LED Modeling Light and the Impact Fresnel Spot S-Mount Attachment (10-40°) are physically compatible products. However, when the Fresnel is set at its widest position the LED pattern from the Monolight is projected clearly on a white surface. When the light is focused tightly the LED pattern is less obvious.

Q: 6. Will this work with Godox vl150 ?

A: Yes.

Q: 7. Is it compatible with the Aputure LS 60D ?

A: This is not compatible with a 60d.

Q: 8. I am trying to use this with a Bowen Gemini 500R and it does not fit, Any suggestions?

A: It should fit, just measure to see if the Bayonet attachment spacing is correct.

Q: 9. Are there any barn door accessories that fit this Fresnel?

A: While this model doesn't offer optional barndoors, the Aputure Fresnel 2X Attachment would be a good alternative that does. https://bhpho.to/34l37Lt

Q: 10. What is the warranty period(from Sangean) for this radio ?

A: According to the following page from Sangean, the WFR-39 comes with a 1 year warranty from Sagean. https://www.sangean.com/support/warranty-policy