Ensure a secure and long-lasting connection between compatible devices with the Sescom XLM6-XLF6 Belden & Neutrik 6-Pin XLR Male to 6-Pin XLR Female Cable. The cable is designed for multiple applications including line-level, balanced analog audio applications. It's also an ideal choice for tube microphone applications, extension cables, dual-channel intercom systems, stage lighting, and professional stereo headsets with balanced microphones.

This 50' XLM6-XLF6 cable is terminated with a Neutrik NC6MXX 6-pin XLR male connector at one end and a Neutrik NC6FXX XLR 6-pin female connector at the other. Both connectors feature rugged, zinc diecast shells.

The XLM6-XLF6 utilizes rugged Belden RS-232 cable with an overall Bedfoil shield that provides 100% coverage and a semi-rigid PVC insulation to ensure a cable run that stands up to your environment. The cable offers excellent chuck strain relief to avoid shorts due to strain. It is assembled in the USA.

Dual-Channel Intercom, Stage Lighting    Tube Mics, Extension Cable    Neutrik Pin Configuration    6-Pin XLR Male to 6-Pin XLR Female    8 Conductor, 24 AWG, PVC Jacket    Rugged Belden RS-232 Cable    Length: 50'    Assembled in the USA

• Length: 50'
• Long-lasting and dependable 6-pin XLR Neutrik NC6FXX female/NC6MXX male connectors
• Rugged Belden RS-232 cable
• 8 conductors, 24 AWG, PVC jacket
• 24 AWG stranded tinned copper drain wire
• Tinned copper conductors
• Overall Beldfoil shield (100% coverage)
• Excellent chuck-type strain relief
• Rugged zinc diecast connector shells
• Semi-rigid PVC insulation
• Lifetime mating cycles: 1000
• Insertion/withdrawal force: ≤ 20 N
• Nominal cable diameter: 0.224"
• Bend radius: 2.25"

Related Questions and Answers

Q: 1. How long is the MI shoe cable and does Sony make any longer shoe cables available separately?

A: At this time, Sony does not specify the length of this cable. We do not see any additional cable options for this unit.

Q: 2. how long is the cable?

A: without plugs the length is 43 cm (only cable)with plugs on both side: length is total 54 cmconversion onto feet/inches should be43 cm = 1 ft and 4.9291 inches54 cm = 1 ft and 9.2598 inches

Q: 3. Is this compatible with the Sony a7sii?

A: Yes, the XLR-K3M is compatible for use with the a7s II.

Q: 4. Does this unit support mid side microphones?

A: Unfortunately not, no Mid-Side setting .

Q: 5. There is some product photos showing two switches on the back of the unit (Digital/Analog) and (Input Select). Can all 3 channels be selected for output to my camera?

A: The Digital/ Analog switch must be set based on whether the attached camera can accept a digital audio source or not. If the camera can accept a Digital Audio connection, then set the switch to Digital. If not, then set the switch to Analog. In terms of audio input selection, if your camera can accept 4 channels of audio, you can switch input select to IN1-IN2 and all input channels will be sent to the camera. If your camera can only accept 2 channels of audio, then you can use inputs 1 and 2, or input 3.

Q: 6. Is this compatible with other brands of mirrorless cameras? Probably not, but would be nice if it played well with Nikon z6ii or Canon R5/R6?

A: No. this SONY adapter is only compatible with SONY cameras that feature the proprietary SONY Multi Interface shoe and are listed as compatible with the SONY MI shoe. Compatibility: Digital Audio: Sony Cameras Equipped with Digital Multi Interface Shoe Analog Audio: Sony Cameras Equipped with Either Multi Interface Shoe or Digital Multi Interface Shoe

Q: 7. Just to set this straight: can you record four channels (XLR 1, XLR 2 & 3.5 mm stereo) with the A7S III?

A: No, the XLR-K3M is a two-channel adapter kit designed for Sony cameras that use their Multi Interface Shoe. The kit includes the XLR-A3M two-channel mixer/adapter and ECM-XM1 shotgun microphone. Only two microphones can be connected to the XLR-A3M - one on each of the XLR-1/4" combo jack inputs or one single stereo mic connected to the stereo 3.5mm mini jack input. Here is a link to the user manual for additional information: https://www.bhphotovideo.com/lit_files/615688.pdf

Q: 8. Two questions: Will this Adapter (for sure) work with the Sony a6400 and allow 2 microphones to be recorded on 2 separate tracks internally?

A: Yes, this mic adapter will work with the a6400. Please note, the digital/ analog switch must be set to ANALOG in order to work. As well, to record two separate audio channels, the input selection switch must be set to IN1-IN2.

Q: 9. Can I get a direct digital signal from my H4n connected to the K3m on my a7riv?

A: I am afraid not.

Q: 10. Will this work with the BMPCC4K and the senheiser mkh 416 boom mic?

A: It will work with any mic that has a male xlr connector. R