Optimize the performance of your data center, server farm, storage area network, or other high-bandwidth network without getting tangled up in cables with the 100' Belden 10GX Cat 6 UTP EtherCON to RJ45 Ethernet Cable from Laird Digital Cinema. This rugged 4-pair, 23 AWG unshielded twisted pair (UTP) Cat 6 cable features a shielded EtherCON connector on one and an RJ45 plug on the other, providing strong connections with compatible devices. With a diameter of 0.295", the Belden 10GX is designed to save you space while the 625 Hz bandwidth rating supports 10 Gigabit Ethernet speeds at distances of up to 328 feet. The lightweight Belden 10GX is also CMR riser rated and features reduced crosstalk and is protected against harsh electromagnetic emissions from nearby electronics such as power strips, extension cables, and other equipment.

1 x EtherCON Connector    1 x RJ45 Connector    Unshielded Twisted Pair Cable    Slim, Lightweight Cable Design    4-Pair Configuration    23 AWG    Copper Conductor    625 MHz Bandwidth Rating    CMR Riser Rated

Related Questions and Answers

Q: 1. Hey there. Is the Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 lens fully compatible with the OM-1? Will both the in-body and lens stabilization work together and all camera AF functions work? If not, what functions won't work? Thanks!

A: The Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens is fully compatible with the OM SYSTEM OM-1 Mirrorless Camera.

Q: 2. Does the optical image stabilization sync with the in-camera sensor stabilization in Olympus cameras?

A: They will both work in conjunction with each other.

Q: 3. Will this cord enable camera control from the zhiyun crane s3 for the Fs5 mark ii?

A: No, unfortunately the Zhiyun-Tech Cinema Camera Control Cable for CRANE 3S (Sony) will not work with the Fs5 as it is not supported by the Crane 3s.

Q: 4. When used with a Panasonic camera such as G9 or GH5, what stabilization mode will work? Can I turn off the lens stabilization and just use the camera's IBIS?

A: When pairing the Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens together with the Panasonic Lumix G9 Mirrorless Camera or the Panasonic Lumix GH5 Mirrorless Camera, you would have to use either the lens' built-in image stabilization or the camera body's built-in image stabilization, but you cannot use both at the same time. Dual I.S. stabilization using both the camera's in-body image stabilization and the lenses built-in stabilization is only compatible when using Panasonic-branded lenses on Panasonic cameras. As such, yes, you may turn off the lens' stabilization and just use the camera's in-body image stabilization feature. For more information, you may view pages 145-148 of the Panasonic Lumix G9 Mirrorless Camera's Owner's Manual for Advanced Features, or pages 143-146 of the Panasonic Lumix GH5 Mirrorless Camera's Owner's Manual for Advanced Features.

Q: 5. Does this lens support pro capture function and does it support in camera focus stacking?

A: Yes this Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens is compatible with both Pro Capture and Focus Stacking

Q: 6. Where is the Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens manufactured?

A: This lens is manufactured in Japan.

Q: 7. Is this lens compatible with the OMD M5 mark 2?

A: Yes, the Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens is compatible with the OM-D E-M5 Mark II.

Q: 8. Is there a longer cable or extension cable that will work with the CFAST 2.0 Card Reader?

A: This is a high quality extension cable you can use. https://www.bhphotovideo.com/c/product/1700565-REG/owc_owctccblex0_5m_usb_c_10gb_s_100w_rated.html

Q: 9. Dos this lens work with the Olympus MC-14 1.4x teleconverter?

A: Yes The ED-100-400mm F5.6 -6.3 IS supports the use of the MC-14 Tele converter

Q: 10. has anyone used this on a Epl5? I know Olympus says its compatible. Just wonder personal results.

A: The Olympus M.Zuiko Digital ED 100-400mm f/5-6.3 IS Lens is compatible with the EPL5 but due to the small size of the EPL5 body, it is awkward to use a long lens.