Bring the party nearly anywhere you go with the squad JBL Charge 5 Portable Bluetooth Speaker. With a built-in rechargeable battery that lasts up to 20 hours and an IP67 waterproof and dustproof rating, you can bring the speaker to the beach, park, pool, or wherever you like, and stream music, podcasts, and more wirelessly via Bluetooth. It outputs up to 40W of total RMS power, and dual passive radiators help boost the bass.

Wireless Bluetooth Audio Streaming    Pair up to Two Mobile Devices at Once    Dual Passive Bass Radiators    Rechargeable Lithium-Polymer Battery    USB Type-C Device Charging Port    Lasts up to 20 Hours on a Full Charge    IP67 Waterproof and Dustproof Rating    Pair with Other JBL PartyBoost Speakers

Take the amazing power of JBL Pro Sound with you. The JBL Charge 5 has an optimized long-excursion driver, a separate tweeter, and dual JBL bass radiators, all delivering impressively rich and clear audio. Get that big room sound, even when outdoors.

The fun doesn't have to stop. Packed with an incredible 20 hours of battery life, the JBL Charge 5 lets you party all day and into the night.

To the pool and to the park, The JBL Charge 5 is IP67 waterproof and dustproof, so you can bring your speaker anywhere.

Wirelessly connect up to two smartphones or tablets to the speaker and take turns enjoying JBL Pro sound.

PartyBoost allows you to pair two JBL PartyBoost-compatible speakers together for stereo sound or link multiple JBL PartyBoost-compatible speakers to truly pump up your party.

Don't put the party on pause. A built-in power bank lets you charge your devices without taking a break from the tunes.

• 30W RMS output for the woofer, 10W RMS for the tweeter
• Charges in just four hours

Related Questions and Answers

Q: 1. Will a Sanken COS-11D work with this?

A: Yes,, you can use a Sanken COS-11D, but the microphone must have a locking 3.5mm connector for compatibility with the input on the Zoom F2-BT. For example, you can use the Sanken COS-11D Omni Lavalier Mic, Normal Sens, Hardwired 1/8" TRS Connector for Sennheiser Evolution Wireless Transmitter (B&H # SAC11WNSETRB). Microphones wired for use with Sennheiser transmitters are compatible with the F2 and F2-BT, but microphones wired for Sony transmitters are not compatible because the wiring is different.

Q: 2. Can this be used to power the Sony FX30 via USB-C? Card slots are for computer/tablet?

A: The upio Tri-Charge for Sony NP-FZ100 may able to power the Sony FX30 Digital Cinema Camera (B&H # SOFX30), though it is not a setup that is usually tested. The slots are for SD, microSD, and CFexpress memory cards.

Q: 3. Can you use this with a wireless mic system?

A: Yes, you can use a wireless mic system instead of the lavalier mic. Just be sure to use a cable that has a locking 3.5mm TRS connector for the input on the F2-BT. if your wireless receiver output cable has a standard non-locking 3.5mm TRS, you can use a female to female coupler adapter like the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF) to connect your receiver's output cable with a second cable such as the Sennheiser CL1 3.5mm to 3.5mm Output Cable (B&H # SECL1) which has a standard non-locking 3.5mm TRS male connector on one side and locking 3.5mm TRS male end on the other side to go to the F2-BT's locking input.

Q: 4. How do you monitor the audio? I don't see a headphone jack (unless it's the output?) and it appears as though wireless/bluetooth monitoring is impossible via the app.

A: You can use the output jack to connect headphones for monitoring audio. The F2-BT's Bluetooth is used for app control and timecode which requires the UltraSync BLUE (B&H #ATOMXSYBL1US). If you want to connect Bluetooth headphones, you could connect a separate Bluetooth adapter such as the GOgroove BlueSENSE TRM Bluetooth Audio Transmitter (B&H #GOBLUESENSE) to transmit audio from the F2's output to your Bluetooth headphones.

Q: 5. Does the power bank feature run off of the batteries or is there a power bank in the device that can charge the camera batteries too?

A: To use the Jupio Tri-Charge for Sony NP-FZ100 as a powerbank for your smart device, you would need at least 1 FZ100 battery. More batteries would last longer. To charge your FZ100 batteries from a powerbank, you can use the included USB cable plus an optional powerbank.

Q: 6. How do you format the micro SD card inside the device? Can't find an option on the app

A: This needs to be connected to your computer and the F2 Editor program needs to be used. It can not format usng the App.

Q: 7. Will the Zoom F8 sync to the F2-BT?

A: Yes. You will need to use the UltraSync BLUE (BH #ATOMXSYBL1US) to sync the F2-BT and F8 to receive and write timecode to recorded files.

Q: 8. Does this have 4 pins to read the BLK22's temperature sensor or just 2 for charging?

A: The Jupio Tri-Charge for Panasonic DMW-BLK22 displays the status of the charge on the battery.

Q: 9. What is the file size per minute of recording?

A: Information on file size per minute of recording has not been provided by the manufacturer. However, the F2 and F2-BT can be used with microSD, microSDHC, and microSDXC cards up to 512 GB (Class 4 or higher).

Q: 10. can I use the Bluetooth version to connect to insta 360 one r or any other camera?

A: No, Bluetooth on the F2-BT is used for app control and wireless timecode.