Designed for voice, data, and security uses, the white CAT6 Twisted Pair Networking Cable from Bolide Technology Group adheres to the Cat6 standard and comes in a length of 1000 feet. This cable is marked by the foot and packaged in an easy-to-pull box to help simplify installation. Underneath the cable's PVC jacket is copper-clad aluminum wire that has been sparker tested up to 1200V. Protection is provided by a limited one year warranty.

Cat6 Standard    1000' Length    PVC Jacket    Copper-Clad Aluminum Wire    Sparker Tested: 1200V

4-pair unshielded twisted pair UTP Ethernet LAN cable

23AWG network & ethernet cable

Conductor: 1/0.52±0.008mm
PVC Jacket Outside Diameter: 6.0±015mm

A Category 6 cable, commonly referred to as Cat 6, is a standardized twisted pair cable for Ethernet and other network use

Foot-marked cable is packaged in an easy-to-pull box for easier installation

Related Questions and Answers

Q: 1. What type of power supply is shipped with the device? Is is a normal DC wall pack, or is it the PS-1202?

A: It is a wall-wart style DC power adapter.

Q: 2. What type of junction box does this attach to? Round? Octagonal? Square?

A: The Bolide Technology Group 78" Heavy Duty In/Out Adjust Bracket (BH #BOBP002178) is not designed to accommodate a junction box. It is fitted with a standard 1/4"- 20 male camera mount.

Q: 3. Is there any audio delay or sync issues with audio and video?

A: There should be no audio delay or sync issues with this unit. It also will have a very low latency.

Q: 4. is the extender IP based? is it able to be fed through a switch in its own VLAN? or does it have to be a direct connection on both ends?

A: It is not IP traffic, it is HDbaseT over ethernet cable. https://en.wikipedia.org/wiki/HDBaseT

Q: 5. can I use this with my Sennheiser ie 200 as an upgrade ?

A: No. The Sennheiser Twisted-Pair Cable for IE 400/500 PRO In-Ear Headphonesis not compatible for use with the Sennheiser IE 200 In-Ear Headphones. The connectors are different. The IEM 200 uses standard MMCX connectors and the Sennheiser Twisted-Pair Cable has proprietary connectors. You can use cable like the Westone Audio 64" ES and UM Pro Twisted Replacement Cable with MMCX Connector - Clear (B&H # WERCESUM64C).

Q: 6. what is the max resolution that this will support?

A: This for HDMI, I.E 1080p.

Q: 7. Can I use this device as HDMI extender over cat6 to get picture from cable box and ir extender to control a cable box?

A: That should be possible. This HDBaseT Transmitter and Receiver set is HDCP complaint, which is necessary for it to work with a cable box. It also can extend IR over the Cat6 cable.

Q: 8. Is the receiver required? I'm running directly to a projector that accepts HDbaseT as an input.

A: In theory, the Kramer TP-580T HDBaseT Twisted Pair Transmitter should produce the signal and not need the receiver.

Q: 9. Does this unit pass HDR also?

A: No HDR pass-through is defined on this product.

Q: 10. Will this support 1920x1200?

A: System Range : 1080i,1080p, at different distances and BC-DGKat 524.