Designed for voice, data, and security uses, the blue CAT6 Twisted Pair Networking Cable from Bolide Technology Group adheres to the Cat6 standard and comes in a length of 1000 feet. This cable is marked by the foot and packaged in an easy-to-pull box to help simplify installation. Underneath the cable's PVC jacket is copper-clad aluminum wire that has been sparker tested up to 1200V. Protection is provided by a limited one year warranty.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    Cat6 Standard    1000' Length    PVC Jacket    Copper-Clad Aluminum Wire    Sparker Tested: 1200V

4-pair unshielded twisted pair UTP Ethernet LAN cable

23AWG network & ethernet cable

Conductor: 1/0.52±0.008mm
PVC Jacket Outside Diameter: 6.0±015mm

A Category 6 cable, commonly referred to as Cat 6, is a standardized twisted pair cable for Ethernet and other network use

Foot-marked cable is packaged in an easy-to-pull box for easier installation

Related Questions and Answers

Q: 1. can I use this with my Sennheiser ie 200 as an upgrade ?

A: No. The Sennheiser Twisted-Pair Cable for IE 400/500 PRO In-Ear Headphonesis not compatible for use with the Sennheiser IE 200 In-Ear Headphones. The connectors are different. The IEM 200 uses standard MMCX connectors and the Sennheiser Twisted-Pair Cable has proprietary connectors. You can use cable like the Westone Audio 64" ES and UM Pro Twisted Replacement Cable with MMCX Connector - Clear (B&H # WERCESUM64C).

Q: 2. Would i need the receiver if i have a device that supports HDBT?

A: No, the Kramer PT-571 HDMI over Twisted Pair Transmitter will allow you to output HDBT signals directly to the device you are using that has HDBT input. You do not need a receiver.

Q: 3. Does this unit pass HDR also?

A: No HDR pass-through is defined on this product.

Q: 4. what is the max resolution that this will support?

A: This for HDMI, I.E 1080p.

Q: 5. Would this cable work with Logitech PTZ Pro 2 camera?

A: No, that camera uses USB.

Q: 6. What type of junction box does this attach to? Round? Octagonal? Square?

A: The Bolide Technology Group 78" Heavy Duty In/Out Adjust Bracket (BH #BOBP002178) is not designed to accommodate a junction box. It is fitted with a standard 1/4"- 20 male camera mount.

Q: 7. Does this have standard 1/4"-20 mount at camera end?

A: The Bolide Technology Group 78" Heavy Duty In/Out Adjust Bracket BH #BOBP002178 is equipped with a 1/4"-20 standard camera mount.

Q: 8. Are there access holes on each end for cables, like https://www.bhphotovideo.com/c/product/684128-REG/Vaddio_535_2000_291_Drop_Down_Ceiling_Mount.html?

A: Yes, The Bolide Technology Group Heavy Duty In/Out Adjust Bracket does have cable access cutouts on the base and the end of the pole where the camera mounts.

Q: 9. Is the receiver required? I'm running directly to a projector that accepts HDbaseT as an input.

A: In theory, the Kramer TP-580T HDBaseT Twisted Pair Transmitter should produce the signal and not need the receiver.

Q: 10. Is there any audio delay or sync issues with audio and video?

A: There should be no audio delay or sync issues with this unit. It also will have a very low latency.