You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Techlogix Networx Mofo Fiber Optic Ultra-high Speed Hdmi Cable (3.3')

Techlogix Networx Mofo Fiber Optic Ultra-high Speed Hdmi Cable (3.3')
  • Product Code: ga203004
  • Availability: In Stock

$568.92 $768.04

Connect your high-resolution source device to your compatible display over a long distance with the 3.3' TechLogix Networx MOFO Fiber Optic Ultra-High Speed HDMI Cable. It supports resolutions up to 8K UHD, plus Audio Return Channel (ARC), eARC, dynamic HDR, Dolby TrueHD, DTS-HD Master Audio, and HDCP 2.2 for use with various types of content. VRR and ALLM support make it a good choice for use with modern gaming systems. It uses fiber optic wiring to support long cable runs and virtually eliminate EM and RF interference. The cable is powered by your HDMI devices, so no external power source is required. It features a directional design, with headshells designated for your source and display.

Supports 8K UHD, Dynamic HDR, 3D    VRR & ALLM Support for Gaming    Plenum-Rated    Supports eARC & ARC    Directional Design

General
Connector 11x HDMI Male
Connector 21x HDMI Male
Cable Length3.3' / 1 m
InterfaceHDMI 2.1
HDCP SupportYes, Version 2.2
Additional Feature SupportARC (Audio Return Channel) / CEC (Consumer Electronics Control) / EDID (Extended Display Identification Data) / eARC (Enhanced Audio Return Channel)
Maximum Resolution Support7680 x 4320 at 60 Hz
Environmental
CertificationsCEC, Plenum
Operating Temperature32 to 122°F / 0 to 50°C
Operating Humidity85%
Conductor MaterialCopper
Outer Diameter0.2" / 4.5 mm

  • Fiber-based HDMI cable
  • No external power required – powered by the HDMI bus (250mW maximum power draw)
  • Supports 48 Gb/s, 8K60, 4:4:4 color, HDR, 3D, and Deep Color
  • Supports VRR, QMS, QFT, ALLM, and DSC
  • Supports multichannel audio, including Dolby TrueHD, DTS-HD Master Audio, ARC, and eARC
  • EDID, CEC, and HEC support
  • Directional operation with clearly marked source and display headshells
  • Interference-free performance
  • Four-strand multimode OM3 construction supports re-termination in the field for upgrades and repurposing
  • Kevlar-strength design
  • 1.8" minimum bend rating
  • 70 lb max pull strength

Related Questions and Answers

Q: 1. Can this be used with the wider angle Nikon AIS lenses? My 24mm has a piece in the rear that seems to interfere with mounting...

A: Metabones Nikon G to Canon RF-Mount Speed Booster ULTRA 0.71x is compatible with Nikon AIS lenses.

Q: 2. What is the difference between the speed booster and the regular adapter?

A: A regular adapter allows you to attach 3rd party lens mount lenses on your camera. The speedbooster lens mount adapter does two magic things: it contracts the image preserving it's full frame angle of view. This very helpful when going to a smaller sensor. It lowers your need for getting wide angle lens. The second amazing magic trick occurs when this concentration of light boosts the brightness of the lens so much, it makes lens faster, brighter, better in low light.

Q: 3. Will this adapter communicate iris information to the camera? Specifically zeiss planar zf lenses and sony fs5 camera.

A: No auto functions are not retained using this speed booster.

Q: 4. Apologies, I meant Nikon AF lenses. - Mark ? in Canada

A: I see the correction you made but that still is not the correct adapter.This will work on your camera with the Nikon AF lenses, Metabones Nikon G Lens to Sony NEX Camera Lens Mount Adapter (Matte Black) B&H # MENFGEBM1 MFR # MB_NFG-E-BM1.

Q: 5. Okay, I'm not sure if this question was answered, but will this speed booster make my shot Full Frame? I'm using a Sony a7s, with Nikon AIS glass.

A: Sorry, I using tris adapter nikkor Lens to Hasselblad Lunar The type sensor is APS. Is like de Sony Next 7 E mount. But nikkor len ASi works very well .

Q: 6. what are the numbers on the ring?

A: I believe you are referring to the aperture ring. A built-in clickless aperture control ring enables manual control of aperture from the speed booster. This 8-stop ring with clearly marked 1/2-stop markings is shipped as clickless.

Q: 7. Would the concentrated image from a tilt-shift lens cover the area of a full frame sensor, or was this made to only cover apsc?

A: The Metabones Nikon F-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA is only made for an APS-C format E-Mount camera so it will not cover the the area of a full frame sensor with the concentrated image from a tilt-shift lens.

Q: 8. Can I use this on a Red Komodo X with carl zeiss ZF.2 lenses?

A: Yes, the Metabones Nikon G to Canon RF-Mount Speed Booster ULTRA 0.71x can be used to adapt Carl Zeiss Nikon F mount ZF.2 lenses on the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF) and any other RF mount camera as well.

Q: 9. Please I need to know if this booster will permit me use my sigma lenses for Sony on a Nikon d850 camera?

A: This speed booster is intended to put Nikon lenses on a Sony body, not Sony lenses on a Nikon body.

Q: 10. Will using this on an FS7 with full frame lenses negate the crop factor?

A: The Metabones Nikon F-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA, B&H # MESPNFGEBM2, has no effect to crop factor. The Sony PXW-FS7 XDCAM Super 35 Camera System uses a Super 35 CMOS sensor. When comparing the angle of view of a lens used on the Sony PXW-FS7 XDCAM compared to a camera with a full-frame sensor, there is a 1.4x crop factor (technically, 1.392x). As an example, the Nikon AF-S NIKKOR 50mm f/1.4G Lens used on a camera with a Super 35 sensor will have the equivalent angle of view of a 70mm lens used on a full-frame camera.

28/09/2024

I just upgraded my cm400 to the cm1000v2. So far so good. Netgear is very easy to use!

5
15/09/2024

Was easy to install and runs much faster than my last one

5
11/09/2024

This IS the cable modem that you need to exploit the bandwidth opportunities available today. Go get you one, now.

5
18/07/2024

Works just fine and doesn't get too hot or tend to tip over. Looks sharp, too!

5
16/07/2024

This thing just works. My connection from the ISP is supposed to be 500 down and this modem does that with ease. Sometimes it even goes a little higher.

5
15/06/2024

Easy to set up with Comcast. Have 1gbps speed service. Made a big change updating router and all cables. Have 4tvs 2 gaming systems going at same time no issues .

5
05/05/2024

The NETGEAR Gigabit Cable Modem has never failed me. It works with a variety of cable/internet providers and unless theres an outage on your ISPs' end, this modem will be a top quality purchase for your household.

5
16/04/2024

Upgraded home internet. Did not like Cox Cable equipment. Got Gigablaster Modem. Works fantastic.

5
05/04/2024

Once getting past the headache of dealing with Xfinity to provision it, this is one of the best, if not the best Modem I have used to date.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Lilliput Hdmi Cable (5')

$27.00 $32.94

Bzbgear 4-port Hdmi Kvm Switch

$387.00 $565.02

Kramer 4k60 4:2:0 Hdmi Controller

$792.00 $1,021.68

Aver Cp Series 75" Display Panel

$10,924.98 $15,731.97

Came-tv Ultra-thin Hdmi Cable (3')

$63.00 $76.23

Feelworld Fw760 7" On-camera Lcd Monitor

$566.97 $839.12

Products You May Like

Gvm 560as Bi-color Led Light Panel

$267.00 $419.19

Wandrd Duo Day Pack (black)

$702.00 $898.56

Elation Professional Pixel Driver 170ip

$796.50 $1,131.03

Urth Nd Lens Filter Plus+ (105mm, 3-stop)

$555.00 $721.50

Zeiss Lens Shade For Milvus 18mm F/2.8

$576.00 $731.52

Norman Nicad Battery For P200b

$656.85 $1,031.25