Quickly expand your wired Gigabit network to reach across your home with the TL-WPA8631P AV1300 Gigabit Passthrough Powerline AC1200 Wi-Fi Kit from TP-Link. This kit includes two HomePlug AV2-compliant modules that plug into 3-prong U.S. wall outlets to reliably transfer data up to 1300 Mb/s over 1000' using your home's electrical wiring. Setup is easy. One module connects to your router through its Gigabit Ethernet port while the remote access point is placed where you need network coverage. Pressing the pairing buttons while the modules are plugged in links them together. In addition to having three Gigabit Ethernet ports for fast connections to computers, smart TVs, and other wired devices, the remote access point also provides 802.11ac Wi-Fi connectivity. Up to 1200 Mb/s may be transferred over the 2.4 GHz and 5 GHz wireless bands with compatible devices, and the system can be integrated into existing OneMesh wireless networks.

Each module has an outlet passthrough that allows you to plug in one powered device, such as a lamp, television, or video game console. Your data connection is secured with 128-bit AES, WEP, WPA-PSK, and WPA2-PSK encryption. The TL-WPA8631P kit supports the IEEE 1901, 802.3/3u/3ab wired standards along with 802.11a/b/g/n/ac wireless protocols. Its configuration software is designed to work with Windows, Mac, and Linux computers.

2 x AV1300 Powerline Modules    3 x Gigabit Ethernet Ports (AP)    3-Pin US Plug with Passthrough    HomePlug AV2 Compliant    Up to 1000' Range    IEEE 1901, 802.3/3u/3ab Standards    Wi-Fi 5 (802.11ac)    2.4 GHz / 5 GHz (Dual-Band)    128-bit AES Encryption    Works with Windows, Mac, and Linux

By using compatible devices to provide far-reaching wireless coverage with a unified mesh network, you can enjoy fast and stable Wi-Fi connections using a single network ID (SSID) as you roam from room-to-room.

With 2x2 MIMO and beamforming technologies, the TL-WPA8631P kit reliably communicates simultaneously with multiple wireless devices over long distances.

Simply plug the included modules into wall sockets at their desired locations, pair them, and you're ready to connect devices. This kit automatically copies your network name and password from the compatible router to help create a mesh network and will synchronize with other compatible devices if you make changes to your network settings.

Related Questions and Answers

Q: 1. My Asus B550 Tuf Gaming Plus MB have a M.2 Key E slot specifically for Wifi/Bluetooth Cards. Is this product compatible with this MB?

A: The basic requirement to install this wireless kit is a motherboard that has an M.2 Socket with Key E 2230. So if your motherboard has such a socket, you can install it.

Q: 2. Will this work on a canon 5D mk III?

A: Canon indicates it will work in three and only three camera bodies:This Wi-Fi adapter must be installed into the SD card slot of the host camera again, an EOS 7D Mark II, EOS 5DS, or 5DS R. These are the only Canon EOS cameras, as of the introduction of the W-E1, that will be compatible.The host camera requires a firmware upgrade, available free from Canon web sites, to enable communication with the Wi-Fi Adapter W-E1. This adds new menu items for the wireless features added by this accessory card. (EOS 7D Mark II cameras sold with the Wi-Fi Adapter W-E1 included in the box will have this firmware factory-installed, so no upgrade is needed for those cameras to enable wireless operation. And, beginning in Fall of 2016, newly-made EOS 5DS and 5DS R cameras will roll off the production line with this firmware also factory-installed.)A very important note: the W-E1 card cannot store image files at all. It solely contains the hardware to perform wireless connection to compatible external devices. Therefore, if the W-E1 card is installed, a CompactFlash memory card must also be installed in the host camera, and this will be the card to which images are stored. There is no work-around to this. If the W-E1 alone is installed, an error message will be displayed on the cameras LCD monitor, informing the user that an incompatible card for storing images is installed.

Q: 3. whats the transfer rate? didn't want to slow down shooting with 70mb raw files of the 5dsr

A: As of now there is no information on the transfer rate. There are many variables that might make it tough to give a transfer rate.

Q: 4. Can this be used to save images directly to a wireless external drive similarly t WFT-E4 II could write directly to a USB drvice

A: Canon W-E1 Wi-Fi Adapter will work with the Canon Connect Station CS100 1TB Storage Device, or a computer running the EOS Utility Software or a mobile device running Canon Connect Mobile App. Unfortunately it is not compatible with third party wireless external drives.

Q: 5. Does this product include the wires and antennas?

A: Hi Alan the Intel AX200 desktop kit comes with the mounting bracket along with the wires and antennas. Thank you for choosing Intel.

Q: 6. Is this compatible with a PlayStation?

A: The WUSB6400M is compatible with computers. It will not be compatible with the Playstation.

Q: 7. Cf to sad adapter

A: I am not sure what you are asking. Please email your question with a better explanation to askbh@bhphoto.com for assistance.

Q: 8. Hi, would this adapter be compatible with the SL1?

A: I do not think so. This microSD card needs a specific driver in the camera.

Q: 9. Is this device compatible with MAc OS X 10.11.6 and/or Linux UBuntu 20.04 ?

A: Yes, this will work on your version of OSX and should work with your version of Linux with a bit of work installing the driver.

Q: 10. How to connect Arlo cameras to this mesh?

A: Arlo cameras would connect via the 2.4Gz signal generated by the TP-Link Deco PX50 AX3000 Wireless Dual-Band & G1500 Powerline Gigabit Whole Home Mesh.