Copy and distribute information efficiently with the flexible MediaClone SuperCopier Desktop XL. This standalone industrial-grade duplicator enables you to quickly copy information to multiple hard-disk and solid-state drives, making this an essential tool for technical professionals.

With the 8-channel open HDD tray, you can quickly insert and remove drives for efficient copying. The 10" LCD touchscreen enables you to initiate multiple modes including copy, duplicate, clone, and erase, as well as access drive diagnostic operations so you can monitor your connected storage drives. You can clone information from a single disk to as many as seven targets, or manually adjust parameters so you can perform 1-to-1, 2-to-6, 4-to-4, copying, or even more. The SuperCopier supports SAS, SATA, e-SATA, M.2, and even USB drives with 2.5-, 3.5-, and 1.8-inch drives along with ZIF, micro-SATA, mini-SATA, and M.2 NGFF storage devices. You can clone from one type of port, storage protocol, or interface, and save it to a different port, storage protocol, or interface. It supports multiple file formats including NTFS, FAT, exFAT, HFS+, and EXT4.

Standalone Duplication Unit    8-Channel HDD Open Tray    10" Touchscreen LCD    SAS, SATA, e-SATA, M.2 & USB Compatible    Supports Multiple HDD & SSD Form Factors    Cross-Copy Design    Clone, Erase & Format Storage Drives    Built-In Drive Diagnostic Operations    NTFS, FAT, exFAT, HFS+ & EXT4 Support    Upgradable Firmware

Each of the unit's ports are hot pluggable allowing you to quickly plug another drive and select it to run a new operation. You can script the unit to repeat operations. Detailed logs for drive duplication and drive erase sessions, along with SQL erase logs and certificates, are availableto share to a USB drive or over a network. When plugged into a network, you can access the SuperCopier remotely for streamlined operation.

The SuperCopier can automatically open HPA and DCO areas and resize a drive to its full native capacity to erase any hidden data on select drives up to 256TB. The application is built with large, simple, easy-to-navigate icons. In a few clicks you can set the operation to quickly start up and run.

The SuperCopier can support a wide range of devices and form factors including SAS, SATA, e-SATA enclosures, IDE, USB2.0, USB3.0, MMC, M.2 NGFF (SATA or NVMe base), SCSI, FC, USB3.1 interfaces, and 3.5", 2.5", ZIF, 1.8", micro-SATA, mini-SATA, M.2 NGFF form factors.

You have a suite of options when duplicating information. You can mirror image a drive, which copies the entire contents of one to another, along with the operating system if both drives are the same size. You can select and copy a range of files, copy to a folder, scale down information, and even copy to multiple drives simultaneously.

The SuperCopier also erases and formats drives so you can start off fresh. You get DoD 5220-22M, DoD Lite, Security Erase, Enhanced Security Erase, and Sanitize options to ensure nothing remains. You can set your drives in NTFS, FAT, exFAT, HFS+, and EXT4 formats.

You get an array of diagnostic options to monitor the health of your connected drives. You can run four different health tests, including a read-verify, short test, extended full test, and conveyance test. You also gain access to logs and erase certifications that can be exported to a flash drive for storage.

The user can run continuous operations with multiple sessions. Each storage device attached to the unit can be selected to run in an independent session. Each session runs independently of others and can run simultaneously to maximize use of the machine. When a session is completed/aborted, regardless of the status of other running sessions, the user can replace those storage devices with others and start a new session.

You have access to multiple ports for greater flexibility and efficiency. You get eight native SAS ports, nine native SATA ports, two USB 2.0 Type-A ports, seven USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-A port, one USB 3.2 Gen 2 Type-C port, two Gigabit Ethernet ports, an HDMI port, a DisplayPort output, eight SAS expanders, four fiber channel, one SCSI 320, and more.

Related Questions and Answers

Q: 1. Does it fit on the older Sachtler Ace (not XL version) legs?

A: It will fit any legs with a 75mm bowl.

Q: 2. I am a little confused about the legs question and reviews. I have both Grand Induro legs as well as Robus legs and all with 75mm bowls. Will this head work on those?

A: Yes, the Sachtler Ace XL Fluid Head (75mm Bowl) is compatible with those tripod systems.

Q: 3. Will Sachtler Ace XL Fluid Head fit on my E-Image 75mm bowl tripod?

A: Yes it should. 75mm is a standard however each company has minor differences that may make some heads fit better than others. The Sachtler head is compatible with any 75mm Bowl Tripod legs but it will work best on Sachtler legs.

Q: 4. How do you remove the center stud so I can put it on my slider?

A: It should be a simple matter of unscrewing the tie down on the bottom of the head. If you are having issues feel free to reach out to use directly at ask@bandh.com for further assistance.

Q: 5. Will this head fit on Manfrotto legs with 75mm bowl?

A: Yes, the Sachtler Ace XL Fluid Head (75mm Bowl) can fit on almost any legs with a 75mm bowl.

Q: 6. Is it possible to add a second pan bar?

A: yes. You will have to remove the Sachtler logo plate on the left side in order to do so.

Q: 7. Is this Sachtler fluid head accept arca Swiss quick release plate?

A: This tripod does not accept Arca Swiss Plates. However, you could also install an Arca Compatible Clamp to the top of the head, such as B&H # SUMAC14. https://bhpho.to/2b47Qpc

Q: 8. Will the head accept Arca Swiss QR plates?

A: This head does not accept ARCA Swiss QR plates.

Q: 9. is there a shorter lockdown knob for the ace XL

A: Unfortunately we are unaware of a shorter tie-down knob that is compatible with this head.

Q: 10. it will hold heavy 8kg camera setup?

A: Yes, the Sachtler Ace XL Fluid Head (75mm Bowl) will hold 8kg.