Treat your precious 500 Series modules to independent linear power with the WesAudio Supercarrier II rackmount 11-slot 500 Series enclosure. Boasting a toroid external power supply that can deliver up to 5A of power, the Supercarrier II can handle plenty of gear, even double-wide modules and power-hungry units.

Outfitted with ISP (Independent Slot Power) technology and tantalum caps, the Supercarrier II ensures clean, stable, and noise-free power for all your 500 Series equipment. It offers XLR 3-pin connectors for all inputs and outputs, plus there are two DB25 multipin connectors for the first eight slots. Internal link switches are provided to simplify stereo operation on submixes, stereo tracks, and mix buses.

11-Slot Design for Maximum Density    Accommodates Power Hungry or Wide Units    Linear Power Supplied per Slot    Tantalum Caps Minimize Noise    Internal Stereo Link Switches    XLR Connectors for all I/O    In/Out DB25 Connectors for Slots 1-8    Toroid External Power Supply

Supercarrier II is a second generation of WesAudio's popular Supercarrier I rackmount 500 Series standardized chassis. It features 11 slots with innovative ISP technology.

ISP (Independent Slot Power) is a solution that enables accommodation for even the most demanding 500 Series modules. Based on the ISP technology, each slot is individually supplied with linear power, causing each module to work in a totally isolated and independent way. This allows all installed modules to work without interference, noise, pops, or clicks.

To separate each slot even more, WesAudio incorporated tantalum caps for each slot, effectively cleaning the whole frequency spectrum from any other unwanted noise.

The chassis itself is powered by a big 100W toroid external power supply capable of delivering up to 5A of power.

The Supercarrier II offers all inputs and outputs on XLR 3-pin connectors, plus DB25 multipin connectors for the first eight slots.

• 11 slots
• ISP (Independent Slot Power) technology
• Tantalum caps on each slot
• XLR sockets in/out for each slot
• DB25 socket for first eight slots
• Internal stereo link switches
• Linear power supply capable of delivering 5A of power
• Power mode switch (115/230 VAC)

Related Questions and Answers

Q: 1. Does this bag have a hard bottom or can it be pressed flat to take less space in a checked bag?

A: Yes this bag does have a hard bottom, however, the piece of hard plastic that makes it rigid can be removed from the little velcro pouch at the bottom of the bag to make it easier to flatten and take up less space at check in.

Q: 2. Has anyone had any issues bringing it on Delta as Carry-On Luggage? Their maximum size requirement is @ 45". Approximately 22" x 14" x 9" . If my math is correct this backpack measure in at 47.05".

A: carry-on luggage size is 22” x 14” x 9” and this bags Exterior Dimensions 12.6 x 12.8 x 21.65" they might give you hard time carrying it on

Q: 3. From the dimension, it should hold Canon 600 mm F4. Does it?

A: If you are referring to the Canon EF 600mm f/4L IS II USM Lens, B&H # CA6004LIFEF2, or the Canon EF 600mm f/4L IS III USM Lens, B&H # CA6004L3, as long as the lens is not connected to the camera, you would have enough room to insert the lens inside the Lowepro Flipside 500 AW II Camera Backpack (Black), B&H # LOF500AW2BPB.

Q: 4. Would it work with a 672S Series Light?

A: It will be a very tight fit not recommended. This Angler Collapsible Softbox BH #ANLEDSB1818 will work very well with the 672S

Q: 5. How much output can you get with fan turned off? Is it 15% of maximum? Or only 15% of total output?

A: The Nanlite Forza 500 II Daylight LED Monolight with the fan turned off will produce at the most 15 percent of the full power when set to that.

Q: 6. Will the Anvil 11 hold a Canon 5D Mark iii?

A: Yes it will hold the 5DIII without a battery grip

Q: 7. Will my Canon 100-400mm lens with hood fit into this bag?

A: I returned the Anvil Slim 11 in favor of a Manfrotto 230 Pro-light Bumblebee. The Anvil was uncomfortable - the straps were not sufficiently adjustable to accommodate my frame. The Manfrotto is a larger more comfortable bag which can easily handle the Canon 100-400 and a 7D body with battery grip.

Q: 8. Will these work on the GVM 1200s?

A: It will not work, this Angler Collapsible Softbox for 12x12" LED Light Panels B&H # ANLCSB121 is recommended for the led 1200

Q: 9. GVM Softbox for 480LS/560AS/800DRGB Series LED Lights (11 x 11"): does,it fit with gvm rgb 800D? Thank you!

A: Yes, it fits the 800D. It is made to fit the 480LS/560AS/800DRGB Series LED Lights.

Q: 10. how many per quantity?

A: The GVM Softbox is sold one per quantity amount.