Professional DJs and record collectors looking for a classic record case will appreciate the silver Reloop 80 Record Case. With its robust aluminum-coated wood construction and thick foam padding, the case provides ample protection while on the go.

The inclined-cut design offers a 50/50 division, which provides maximum ease of use when digging for records, due to the angular sloping design of the two halves. When in divided mode, records up front are highly visible, while the rearmost section provides superior support and protection.

Classic Record Case    Inclined Cut Case with 50/50 Division    Robust Aluminum-Coated Wood    Thick Foam Padding    Fold-Away Handle    Round Protective Angles    Low-Profile Butterfly Lock    Protective Rubber Feet on Top and Bottom

• Classic record case
• Robust construction made of aluminum-coated wood
• Inclined cut case with 50/50 division
• Lockable low-profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

Related Questions and Answers

Q: 1. Will the transmitter fire from a pc link on older film cameras? Say on a Hasselblad or Rollei TLR, for example?

A: I've used this transmitter with my Hasselblad 500CM and it works fine. The only issue I had was that the very small PC sync cable that came with the transmitter started acting funny and no longer works consistently (I'm assuming there's an issue with the contact in the piece on the end of the cable). But that's a problem with the sync cable, not the transmitter.

Q: 2. Will the PowerSync 16-80 allow me to trigger my Elinchrom bx500ri strobes from my sony A7sII?

A: Should, unless there's something unique to Sony's basic Hotshoe setup.This trigger just runs off basic hotshoe/PC sync Unless you buy a camera specific cord for triggering the camera itself from a remote location. However, do not go over the max noted shutter speed of 250th.

Q: 3. Is device compatible with Sony A7RIII for remote trigger? If so does it require a cable from device to camera?

A: To trigger the A7R III remotely, you would need one of these units connected with the Vello 3.5mm Remote Shutter Release Cable for Select Sony Cameras with Multi-Terminal, BH #VERCCS235, while the second Impact unit is the transmitter in your hand. https://bhpho.to/2GvqNAr

Q: 4. Will the DJI Mini 4 Pro fit inside of this case?

A: Yes, the Lowepro Hardside CS 80 Camera Case will fit the DJI Mini 4 Pro Drone.

Q: 5. If I have a Sony A65 with a Sony/Minolta hotshoe can I use a HD-N3 hotshoe adapter on the camera then attach the Power Sync 16-80 onto the adapter for it to work? I use this setup for a Yongnuo YN-560 II manual flash.

A: If the HD-N3 converts a Sony/Minolta hot shoe to a standard hot shoe, it is assumed that this will allow the Powersync 16-80 to work on your Sony A65. However, there are no tests which confirm that these products will work together.

Q: 6. Can I use this transceiver with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: If you had 2 of these transceivers you could use it with the Elinchrom D-Lite 400W/s RX 4 Flash Head. The Impact PowerSync 16-80 will not fire the internal receiver on the Elinchrom. You need to have 1 PowerSync 16-80 attached to the 3.5mm sync port of the Elinchrome and 1 PowewerSync 16-80 on the camera.

Q: 7. Good day, may I know if this transceiver support HSS and TTL? I also want to believe it should be able to work with old Minolta/Sony flash like the 5600 HS Shoe Mount Xenon Flash (For Minolta) and Sony ILCA-A77M2 while also using the necessary adapters like the TF-323 SONY & Minolta TTL Hot Shoe to PC Sync Adapter.

A: The Impact PowerSync16-80 Transceiver is a fully manual transceiver. It does not have TTL or high Speed Sync capabilities. As the Minolta 5600HS Flash does not have a PC sync terminal, you would need to purchase a hot shoe adapter such as the Vello HSA-CSMSA Multi-Interface to Sony/Minolta Shoe Adapter, B&H # VEHSACSMSA, to connect the Impact PowerSync 16-80 Transceiver to the Minolta 5600HS Flash.

Q: 8. Will this Gorillapod (https://www.bhphotovideo.com/c/product/1007303-REG) fit within the interior dimensions of this bag?

A: That gorilla pod will not fit in the case, it is too long.

Q: 9. Can I access all 4 decks using Algoriddim Djay PRO software with this unit?Can I sync/loop and play 4 decks simultaneously?Can I cue 1-3 decks in headphones while the 4th deck plays in the FOH mix and then drop in each additional deck one at a time to layer beats and or sound effects?

A: The Beatpad 2 supports 2 deck playback.

Q: 10. is this compatible with Impact PowerSync16 DC Receiver?

A: Yes, this works perfectly and fast