This Protective Lens from CHROMA-Q can be used as a spare or replacement for the one that comes with the Space Force onebytwo LED light. Its acrylic shield helps protect the light's diffuser from scratches, fingerprints, and dirt.

Replacement or Spare Part    Space Force onebytwo LED Light Accessory    Protects against Scratches, Dirt, Prints    Acrylic Material

Related Questions and Answers

Q: 1. can rotolight aeos be use in fuji camera for hss? what trigger should be use?

A: Not at this moment, but it should be soon (we hope). In a Facebook post on March 6, 2017 on Elinchrom LTD's Facebook page, Elinchrom stated that other Skyport Plus HS transmitters were being evaluated for future release, and that the next supported brand would be Fuji. This was also stated in Rotolight's press release from August 31, 2017 when they announced the Skyport 2.4Ghz receiver was built into the Rotolight NEO 2, in which (in reply to a comment about the new Rotolight HSS Transmitter) they stated it is avaialble on launch for Canon, Nikon Sony, Olympus and Panasonic systems (with Fuji to follow next year), and is compatible with all other Elinchrom Skyport devices. As such, we expect a Rotolight Skyport Plus HS Transmitter for Fujifilm Cameras to be released sometime this year, but at this time, there has been no specific announcement or release date for the Skyport Plus HS Transmitter for Fujifilm.

Q: 2. What is needed to trigger this light and use it as a HSS flash (for Canon and Sony)?

A: EOS will work with any HSS trigger/receiver combo with either a PC sync port or 3.5mm flash sync port on the receiver. The only thing that matters is that it is high speed sync capable trigger/receiver (HSS), that your camera is capable of HSS (not all are - particularly Fuji's) and that the receiver has a PC sync port or 3.5mm flash sync port, so you can connect it to AEOS, which has a 3.5mm mini jack flash sync port. You can also just use a wired PC sync cable to 3.5mm mono jack cable (for AEOS) for a much cheaper option if desired. We have tested and would specifically recommend:Pixel King PRO (This is the best price option) and you can buy as a set of 2 (one can be transmitter, one the receiver) For Sony (King PRO S) For Canon : Pixel King PRO XFor Nikon : Pixel King PRO XOther options we like :1. Phottix ODIN II (Canon/ Nikon) Or2. Sony HSS transmitter/ receiver Jason Lanier uses this but it is pretty pricey so option 1 is a better bet. Trigger:Sony FA-WRC1MReceiver: Sony FA-WRR13. Wired PC sync cable The vastly cheaper option (although obviously a little less flexible than wireless triggers) is to buy a PC sync cable, IF your camera has a PC sync port on it. Not all of them do, but if it does then you can just use a long PC sync cableThanks let me know if you have any other questions!

Q: 3. Are these muslins designed for 24' width or 24' in height (to be used as a wall to floor seamless)?

A: The sown in rod hanging looped over part of the fabric is on the 10' side. So, these are designed to hang on the rod with the 10' width. They then fall down 24' and drape onto the ground. You could also use spring clamps (#2 grip clips) to hang the fabric in any orientation you'd like. For example you could clamp the fabric so that it's 24' wide and 10' tall if you like. But it is designed to hang on the included rod and stands in a 10' wide 24' tall orientation... and since the stands only go up so far... there is quite a bit of overflow fabric that you can put on the ground.Hope this helps!

Q: 4. How long will one V-mount 98Wh battery last with light at full power? Please let me know ASAP. thx

A: 3 hrs.

Q: 5. The tripod stands that come with the 2-light AEOS kit would be great for the NEO nut, they're way too light for the AEOS, especially with a V-lock battery. Are there sturdier stands that will still fit in this carry case ?

A: Matthews MAR is rated for 11lbs. https://bhpho.to/2olzk2G. They should be a decent upgrade.

Q: 6. What battery besides the Rotolight brand would work with the AEOS? Brand, size, power etc? And will using a brand other than Rotolight void the warranty? I'm new to V mount so not sure. Thank you...

A: The Core SWX Nano V-Mount Battery B&H # COCOREN98S is another compatible V mount battery for the Rotolight AEOS. https://bhpho.to/2BEZL6o

Q: 7. What is the continuous output of the Aeos at distances 5-6' and 10'?

A: Unfortunately, Rotolight only lists the flash output at 3ft, 6ft, 9ft, 12ft, and 15ft, listing the f-stop in continuous mode, f-stop in flash mode, and Guide Number at varying ISO settings (the link to this chart is listed below). However, they only state the Lux output measured at 3 feet, which is listed as 5750 lux @ 3ft. If you need the Lux output for the other distances, you would have to contact Rotolight directly with your inquiry by e-mailing them at enquiries@rotolight.com to see if they have this information available.http://bit.ly/2oIamrw

Q: 8. Does it work in dimmable fixtures?

A: Yes. The following unit will work on a dimmable fixtures.

Q: 9. Is it possible to get it with an gold mount battery setup and what's the tungsten equivalent for output?

A: Currently the gold mount is not available in the AEOS but i suggest using a widely available vmount to gold adapter plate.

Q: 10. How do you make the bars into the 6' across the top?

A: The top bar comes in three separate sections which allow for you to make it short or long. The whole setup comes apart easily and goes inside a nice little storage case. Best bang for your buck.