Ideal for longer gear like tripods, light stands, or rifles, this HPRC 6400 Wheeled Hard Resin Case appeals to a wide range of applications and industries from photography to law enforcement to nautical uses. Its polypropylene-based TTX01 resin material is lighter than conventional resins without sacrificing strength, durability, and resistance to corrosion. When it's time to go, grab the large top handle and carry it or tow it behind you on its wheels with the smaller side handle. Four latches compress the lid's O-ring to an IP67 rating for protection of your gear. This version of the 6400 case is offered with the HPRC tripod kit. It features a soft lining that won't scratch your tripod's finish and retention straps that hold multiple tripods safe and secure during handling and transport.

Dust and Waterproof    Resistant to Temperature and Corrosion    Interior: 42.6 x 11 x 9.6", 64L Volume    Polypropylene-Based Resin Material    Soft Lining with Tripod Retention Straps    Two Large Handles and a Set of Wheels    Two-Stage Latches with Padlock Holes    Airex Automatic Purge Valve

• Useful for a variety of applications including film, photography, and videography
• ATA300-approved for travel
• Interior dimensions of 36.3 x 11 x 9.6", 54L volume
• Equipped with the HPRC tripod kit: Soft lining with two sets of retention straps that secure multiple tripods in place during shipping, handling, and storage

• Textured and slip-resistant "lizard pattern" handle grips feel solid and secure feel in your hand, even in cold and wet conditions
• Stainless steel handle pins provide strength while allowing the handles to hinge down and out of the way
• Large & ergonomic top handle is comfortable to hold, even under heavy loads
• Wheels on bottom of the case let you roll it for easier handling
• Top grab handle allows you to tow the case behind you on its wheels
• Empty weight of 14 pounds, without tripod kit

• Polypropylene-based TTX01 resin material produces cases which are lighter in weight and stronger than conventional materials
• Reinforced corners improve shock, drop, and impact resistance
• Acid and scratchproof
• UV-protected against color fading
• Able to resist extreme weather and temperature changes
• Broad operating temperature range from -40 to 176°F
• O-ring sealed to an IP67 rating for dust and water resistance
• Airex is the new automatic purge valve that is press-release adjusted to changing environments automatically
• Four two-stage latches enable easy and fluid opening yet are still resistant to accidental opening if dropped

Related Questions and Answers

Q: 1. Does the Ronin S works with Canon 6D?

A: You will be able to balance and shoot with the Canon 6D and 6D Mark II on the Ronin-S. However the original 6D is not on DJI's compatibility list regarding electronic functionality. https://bit.ly/2S6yT9s

Q: 2. Will this work with a Canon EOs 90D with battery grip attached? Also, what extra cables would I need for a 90D and 7DMII?

A: You need the DJI Ronin-S Multi-Camera Control Cable (Micro-USB Type-B) for the 90D, BH #DJCPRN001101. However there is no option for the 7D Mark II as this time.

Q: 3. any neat solution to use camera with arca swiss QR plate?

A: There are certainly some solutions out there, but many increase the height of your payload so taller cameras may be unable to be balanced. More testing needs to be done to determine what setups work perfectly.

Q: 4. What is the weight limit?

A: DJI has not announced the weight capacity. They are telling us that it will take popular Canon, Nikon and Sony camera/lens combinations.

Q: 5. Will it work with the Canon M50. Are any of the camera functions supported from the gimbal?

A: Ye it is compatible with the CANON EOS M50: DJI compatibility list: https://www.dji.com/support/compatibility/ronin-s/m50 EOS M50 + Ronin-S Compatibility result: Control Features/Cable MCC-B (in the box) Capture photo Start/stop recording video Pull focus electronically Trigger auto focus NOTE: MCC-B (in the box) When using MCC-B: 1.The HDMI OUT terminal and digital terminal on the Canon EOS M50 are close together. As a result, it may not be possible to attach cables to both terminals at the same time. In that case, you may not be able to use the monitor.

Q: 6. Do you need the app in order to balance/use this or the Ronin M, or does it just help fine tune?

A: The App is not required to balance this gimbal. However it is very helpful to use for fine tuning.

Q: 7. A few questions pertaining to the canon 80D:-With a standard 18-135 usm lens thats included with the canon 80D, will it be able to be balanced?-Will the Ronin S be able to connect to the Canon 80D and wirelessly start and stop video with the record button on the ronin s?-will half pressing the record button on the ronin S re-autofocus the Canon 80D?-will the focus wheel module built into the Ronin s be able to pull focus of the 18-135 USM lens connected to the 80D?

A: The 18-135mm is not on DJI's list of tested lenses. It may work, but they have not yet tested the lens on the Ronin-S. You will be able to start and stop recording through the Ronin-S, take photos and it will pull focus.

Q: 8. how works the mechanism to control focus from the ronin? which accesories do i have to buy to do this?

A: It depends on which camera you are using. For a list of available controls for different cameras, please click this link. a href= https://d32xrmdsd5z66d.cloudfront.net/Products+info/Ronin-S+Camera+Compatibility+List+(2018.05.29 target= _blank https://d32xrmdsd5z66d.cloudfront.net/Products+info/Ronin-S+Camera+Compatibility+List+(2018.05.29/a).pdf Ronin-S can carry a maximum payload of 8lbs and according to our tests, the Ronin-S can capture stabilized footage with a 5D Mk IV + EF 85mm f/1.4L IS USM lens.

Q: 9. Does this have any 1/4 20 threads on the handle to mount accessories?

A: There are some official accessories and a lot of 3rd-party accessories for this. What solved it for me is the SmallRig Monitor Mount Holder for DJI Ronin S Gimbal Accessories Mounting Plate, w/ 1/4” Thread 3/8” Locating Hole NATO Rail for Magic Arm Handle (2214) available from many resellers including B&H.

Q: 10. Can I use the Ronin S to replace Panoramic tripod heads like the Really Right Stuff PG-02 FG Pano-Gimbal Head? I'm just interested in the Panorama and Timelapse features of the Ronin S

A: You will be able to use the Ronin-S in Panorama and Time-lapse modes. Those are great features to have in a Motorized Gimbal. We would not go as far as to call this a replacement for a high quality Pano-Gimbal Head though.