The 6-stop, 62mm ND Filter Plus+ from Urth features 20 layers of nano-coating providing easier cleaning and better protection against water, oil, and scratches. These layers also provide a higher maximum light transmission and a more consistent transmission curve for truer light reduction.

1.8 Optical Density    20-Layer Nano-Coating    German B270 Schott Optical Glass    Double-Threaded for Stacking Filters

Reduce light to 1.56% to maintain your desired settings in overly bright conditions or to create dramatic motion blur and shallow depth of field in bright light conditions.

The fixed ND64 Filter Plus+ lets you capture motion blur and depth of field effects. Great for landscape photography and cinematic effects in videography.

20-layer nano-coating provides neutral color balance, reduces lens flare, removes ghosting, and protects against scratches.

It is built with German Schott glass for true light transmittance and supreme image sharpness.

Related Questions and Answers

Q: 1. Is the software built to have native Apple Silicon support? That is, will it still work when Apple drops all Intel support?

A: Yes, the software for the Calibrite Display Plus HL Colorimeter has native Apple Silicon support.

Q: 2. How does this attach to a light stand? Do I need a special attachment?

A: The Elinchrom EL-Skyport Receiver Plus has a 1/4 -20 female tripod socket on the bottom of the hot shoe on the receiver. If your light stand has a male 1/4 -20 screw on the top of the stud on the light stand, then it should work for your usage needs. If not, I would recommend the Impact Deluxe Umbrella Mount with Adjustable Shoe, B&H # IMDUBAS, for your usage needs. This would give you the advantage to be able to tilt the receiver (and any flash mounted on the receiver) up and down, and has both a hot shoe and a 1/4 -20 male thread as attachment options for the Elinchrom receiver.

Q: 3. Can this plug into a lightning port, for use with iPhone pro 14?

A: Yes, the JOBY Wavo PLUS On-Camera Microphone can be used with a Lightning adapter to enable compatibility for connection to an iPhone. You can use the included 3.5mm TRS to TRRS cable together with an adapter such as the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) or use the included USB-C to USB-A cable together with the Apple Lightning to USB 3.0 Type-A Camera Adapter (B&H # APMK0W2AMA) which also has a charging port to keep your phone's battery charged while recording.

Q: 4. Has anyone tested these with DisplayCAL, an open source program? The older XRite Color Calibrators work… does Calibrite?

A: That would be a question for DisplayCAL (or Argyll) as to what color measurement devices are supported in their freeware.

Q: 5. Would this work SmallHD monitors?

A: The Calibrite Display Plus HL Colorimeter can be used to calibrate SmallHD monitors.

Q: 6. Will this work with a D-Lite RX-One?

A: we have a mix of new and older Elinchrom units - so far it works with all flash heads we have - however is good to read the specs published by the manufacturer to make sure of compatibility required. We love to be able to do remote adjustments for power.

Q: 7. Does this unit have support for hdmi 2.0?

A: The Magewell USB Capture HDMI Plus uses supports HDMI 1.4 along with UBSB 3.1 Gen 1.

Q: 8. Is the included custom cable a non-standard cable, other than its length ?

A: The included custom cable is a standard cable.

Q: 9. Confused about the 62mm vs. 82mm reference. Will this connect easily to the Sony Z-150?

A: The 62mm thread is on the rear of the converter for attachment to the Sony Z-150 lens. (You must remove the sunshade to do so.) The 82mm refers to the front of the converter and is the size of round filters you can screw on to it.

Q: 10. Is this compatible with Eizo ColorNavigator 7?

A: The Calibrite Display Plus HL is designed to be a replacement for the X-Rite i1Display Pro Plus and Calibrite ColorChecker Display Plus colorimeters.