Implement 3D people counting at the entrance and exit of a retail environment or public building with the white P8815-2 1080p 3D People Counter from Axis Communications. This unit combines 3D imaging software and hardware in one device to automatically count the number of people passing through a predefined area. It estimates occupancy levels in real time and provides data insights to help you understand visitor trends. The P8815-2 features a 1/2.9" progressive scan RGB CMOS sensor to capture 1920 x 1080 resolution video at up to 30 fps. Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable. The unit records directly to network-attached storage.

This device complies with ONVIF profiles G and S, making it compatible with a wide range of surveillance devices. It is optimized to work in challenging conditions, such as when shadows, strong sunlight, glares, or high volumes of foot traffic are present.

3D People Counting    Estimates Occupancy Levels    Provides Data Insights    1920 x 1080 Resolution at 30 fps    RJ45 Ethernet with PoE Technology    Records to Network-Attached Storage    Complies with ONVIF Profiles G & S    Optimized for Challenging Conditions

Performs 3D people counting

Suitable for entrances and exits in retail environments and public buildings

3D depth mapping enables reliable counting in challenging conditions where there is shadow, strong sunlight, glare, or high volumes of foot traffic

Estimates occupancy levels in real time

Delivers data for insights into visitor trends

Add an additional counter (available separately) to cover a wider area

Mounting height from 98 to 236"

Fixed iris

Multiple, individually configurable streams in H.264 and MJPEG

Axis Zipstream technology lowers bandwidth and storage requirements

Controllable frame rate and bandwidth (VBR/MBR, H.264)

Compatible with Microsoft Edge

Integrated software and hardware

100M RJ45 Ethernet

Records to network-attached storage

Security features include brute force delay protection, signed firmware, and secure boot

PVC free

• Bidirectional counting
• Flexible counting area (suitable for revolving doors)
• Supports wide entrances by using multiple counters
• Video stream anonymization
• Automatic upload to separately sold AXIS Store Data Manager and AXIS Store Reporter
• Upload to third-party software through API
• Counting data stored up to 90 days

Related Questions and Answers

Q: 1. This camera records in 3d side by side too?

A: This camera will record 3-D footage in a side-by-side format.

Q: 2. is this gimbal weather shield like Ronin S?

A: The Moza Air 2 is not listed as weather sealed.

Q: 3. In terms of lens compatibility, what's the minimum distance from the flange to the focus ring with this set up? I was thinking of purchasing the Meike MK 25mm F1.8 lens to use with this, but it's a fairly short and stubby lens.

A: The Ronin 3D Follow Focus is compatible with a majority of compact manual lenses. The distance from the flange to the focus ring is not important when performing the focus motor calibration. Focus the 3D Focus System on a person or large object in the center of the camera view that is approximately 1m away. Repeat the previous step with a person or large object that is approx. 4 m away

Q: 4. will this camcorder be able to display its footage in 2D on a non 3D enabled device, if the consumer does not have equipment for 3D mode playback?

A: Yes - you can choose a 2D playback mode. A dedicated switch allows for easy switching from 2D to 3D recording. In 3D mode, only 3D content will be displayed for playback, however when in 2D mode, all content will be displayed and played back in 2D. This allows you to record all your video in 3D and choose later whether or not you want to playback in 2D or 3D.

Q: 5. will the ronin 2 be compatible with the dji wireless follow focus?

A: Hello Rafael. The DJI Focus is compatible with the Ronin 2 however an additional proprietary power cable is required, which will soon be available. Thanks.

Q: 6. Does it work with the new RSC2 gimbal? Or only the RS2?

A: According to DJI's website, it currently only lists the RS2 as compatible, and not the RSC2.

Q: 7. does this work well on the bmpcc 6k camera with the 18-35 sigma lens?

A: Not that we are aware of.

Q: 8. Will this Sandisk (1TB 3D SATA III) handle 4K? Record 4k?

A: Yes, it is compatible.

Q: 9. What kind of remote controller is included and listed in the box, any link?

A: You can review the included remote on page 33 of the manual https://bit.ly/3QN8E2r

Q: 10. Will this work on any camera (with a manual focus lens) or does the camera still needs to be compatible to the RS2 gimbal?

A: The DJI Ronin 3D Focus System for RS 2 Gimbal (B&H# DJR3DFS) itself will work with any lens posessing a linear focusing ring using the correct RS 2 focus motor and can be calibrated using the RS 2 gimbal if that lens has hard stops for maximum and minimum focus. The camera itself does not really need to be compatible with the RS 2 gimbal if the RS 2 gimbal is locked. In such a situation, the 3D Focus System will still work, but of course the camera cannot be moved or stabilized with the gimbal's axes locked.