The white 24869 Tensioned Large Advantage Deluxe Electrol Screen from Da-Lite is designed to be concealed neatly in a ceiling when not in use, which makes it ideal for large corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen.

226" Diagonal    16:10 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    120 VAC, 60 Hz Motor    Three-Button Decora-Style Wall Switch    Includes LVC for Remote Control

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other operates the screen's movement.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. Are you able to use both a color correction gel and softbox attached?

A: Regarding the ARRI ARRILITE 750 Plus, yes, you would be able to attach a color correction gel and a softbox at the same time; however, dialing in a specific color temperature becomes problematic.

Q: 2. Hello; Is the input restricted to 120VAC or does it cover the standard 110/220V ? Thanks !

A: It is restricted to 120VAC

Q: 3. I want a fan that'll blow hair for indoor studio photography. Is this fan going to do that for me?

A: The Antari AF-4 Special Effects Fan, BH # ANAF4R would be a more powerful fan you could use for your application. https://bhpho.to/3v3i1Sd

Q: 4. Hello, how hot is this lamp? I want to use it in my studio. is kind of small. And I am afraid to burn it out? does the light has a dimmer?

A: Yes - This instrument gets hot - but you should be able to lamp it with 575 W or 750 W HPL bulbs. No dimmer is built into the instrument,

Q: 5. Does it come with a bulb inside? Or do you need to order the 750w bulb separately?

A: The bulb is not included with the Arri Arrilite 750 Plus light fixture. You would have to purchase the bulb separately. As listed under the Accessories tab, I would recommend the Ushio HPL+ 750W Lamp (750W/120V), B&H# USHPL750, for your stated needs.

Q: 6. How do they ship this kit? Does it all come as one or each piece individually?

A: This came all in one big heavy box (the one on the image). The box has wheels which definitely helps moving it around.

Q: 7. Will the 12 reflector take a Westcott 50w CFL bulb? I know these bulbs are big, with a wide base.Thanks.

A: No, they won't fit. That lamp base is too broad and the reflector narrows to merge with the bulb holder.

Q: 8. Can you operate this light extendedly while it is pointed downwards? I’d like to use it with a Chimera lantern…

A: Yes, you can use the ARRI ARRILITE 750 Plus extended on a boom aimed down with a Chimera lantern mounted to it as long as the lantern is rated for 750W or above.

Q: 9. Could you put in a led light bulb in here?

A: It would greatly depend on the size of the LED bulb, as not all are made with a base that is narrow enough to fit the socket of this flood lamp.

Q: 10. Do the bulbs blow as easily as lowel pro light bulbs?

A: Do you touch the bulb when placing it in the fixture? One of the first things I was taught on my first job was never touch a bulb when inserting it into the fixture. The oils on your hand gets on the bulb and when turned on, the oils heat up and the bulb will blow. I've had both Arri's(currently this 150 and a 300) and Lowel lights over the years and never had bulbs go out prematurely in either brand. While I believe Arri makes a more durable light than Lowel, you shouldn't have bulb issues if A) Buy a quality bulb, B) Never touch the bulb and C) Handle your lights with more care than an ABC7 news crew.