You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Avenview Displayport 1.4 Fiber Optic Active Optical Cable (98.4')

Avenview Displayport 1.4 Fiber Optic Active Optical Cable (98.4')
  • Product Code: ga204207
  • Availability: In Stock

$1,484.85 $2,167.88

The Avenview DisplayPort 1.4 Fiber Optic Active Optical Cable lets you extend DisplayPort 1.2a and 1.4 digital signal at 8K @ 60 Hz (7680 x 4320) resolution. The fiber optic cable structure allows this 8K extender to transmit at high speed over long distance.

This cable is comprised of a transmitting end and a receiving end. The transmitter is connected to a 8K source via DisplayPort connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 8K display via DisplayPort. The cable will auto detect the display resolution and will adjust the output accordingly.

The cable supports DPCP (DisplayPort Content Protection) and HDCP (High-Bandwidth Digital Content Protection). The High Bit Rate (HBR3) fiber optic cable assembly supports a data transfer rate up to 8.1 Gb/s. The cable has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is ideal for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound.

DisplayPort 1.4 Male Connectors    98.4' Cable Length    Supports up to 8K @ 60 Hz    HBR3 (High Bit Rate) for up to 8.1 Gb/s

General
Connector 11x DisplayPort Male
Connector 21x DisplayPort Male
Cable Length98.4' / 30 m
InterfaceDisplayPort 1.4
Maximum Resolution Support7680 x 4320 at 60 Hz
Environmental
Operating Temperature32 to 122°F / 0 to 50°C
Storage Temperature-4 to 158°F / -20 to 70°C
Operating Humidity20 to 80%

  • High speed and long distance transmission by optical fiber
  • Compatible with DisplayPort standard 1.2a and 1.4
  • HBR3 (High Bit Rate) cable assembly (up to 8.1 Gb/s data rate)
  • Supports up to 8K @ 60 Hz (7680 x 4320) resolution
  • Main-link video signal / AUX data
  • Hot Plug Detection signal is transmitted by 1CH multi-mode fiber - DPCP & HDCP compliant (HDCP are not part of the DisplayPort standard)
  • MMF optical fiber /copper hybrid cable structure

    Related Questions and Answers

    Q: 1. What would be the best source for additional Canon EF lens to use with the Optical Spot?

    A: If you own Canon EF mount lenses, 50, 40 or 35mm prime lenses will create a wider spread than the 150mm lens provided with the Westcott Optical Spot by Lindsay Adler for Bowens.

    Q: 2. Is it bright enough with a 100W constant light for filming?

    A: No. We suggest a bare minimum of 400watts in order to illuminate the light shaping tool.

    Q: 3. Will it mount/use with godox ad300

    A: No, the Westcott Optical Spot by Lindsay Adler for Bowens does not fit on the Godox AD300. However, it does fit on the Godox AD400.

    Q: 4. The video mentions being able to use any Canon EF lens. Will RF lenses ever be considered?

    A: No plans in westcott road map. As of now EF lens only.

    Q: 5. Could this projector be used to light the tip of a match head? Adjusting the metal leaves minutely etc.

    A: Yes.

    Q: 6. Westcott says this modifier is not to be used with a strobe's modeling light on. It is understandable that leaving a 250 watt modeling light on inside this modifier's closed structure would be dangerously hot, but would it be unwise to use a 250 watt modeling light **even briefly** for the purpose of aiming the focused spot?? It I were to buy this I would want to be able to use my modeling light at least briefly to be able to aim the small focused spot of light on the small products I shoot.

    A: Following unit adapt to any Bowens mount system.

    Q: 7. What does compatibility with Bowens mean?

    A: Bowens compatibility is one type of mount the Westcott Optical Spot by Lindsay Adler uses to attach to a light.

    Q: 8. Is this Optical Spot compatible with the Godox VL300?

    A: The Westcott Optical Spot is only suitable for LED lights up to 100 watts, so it would not be compatible with the Godox VL300.

    Q: 9. Can I use this accessory with my Bowens Gemini 750W if I use the modeling lamp in minimum power?

    A: This is not recommended for Bowens S mount strobes that use a tungsten modeling lamp.

    Q: 10. Can you use this https://www.bhphotovideo.com/c/product/1713555-REG to adapt to broncolor mount if i got the bowens version?

    A: Yes you can.

  • There are no reviews for this product.

    Write a review

    Note: HTML is not translated!
        Bad           Good
    Captcha

    Products You May Like

    Robocup Plus Cup Holder (light Blue)

    $35.97 $57.55

    Hp 25g Sfp28 Lc Fiber Optic Transceiver

    $224.85 $305.80

    Lenovo 15.6" Thinkpad L15 G4 Notebook

    $3,760.95 $5,791.86