American DJ designed this QRC MH Moving Head Flight Case to safely transport and store four ADJ Focus Spot 5Z, Focus Spot 4Z, Focus Spot 4Z Pearl, Focus Spot Three Z, Focus Spot Three Z Pearl, Focus Beam LED, or Vizi Beam RX One moving head fixtures. The case has a divider section to hold clamps, cables, and other essentials. The top-loading design allows you to drop fixtures into the case head first and hang them from their bases to ensure maximum protection.

Holds 4 ADJ Focus Spot 5Z/4Z    Foam-Padded Interior    End Divider Holds Clamps, Cables, Cords    Spring-Loaded Handles    Top Loading, Fixtures Hang in Case

• Tongue and groove sealing extrusion
• 3/4" plywood base plate
• 2" foam
• 4 high-impact blue casters support up to 300 lb
• 2 high-impact recessed spring latches
• 4 spring-loaded handles
• 8 high-impact flat corners
• 4 stacking cups

Related Questions and Answers

Q: 1. will this charger work with a nikon 750 ?

A: Yes, The D750 is the camera for which I am using this MH25A charger. I decided I should carry a spare while travelling and it has worked perfectly.

Q: 2. Are these new never used ?are they actually nikon brand ?

A: Yes. New and includes 1 year warranty from Nikon.

Q: 3. What is the difference between this charger and the older MH-25, other than the 'a'?

A: Basically I am of the opinion they are the same or so slightly different; I have used both of them for the same battery recharging. I think there might be a little more quick charging with model ending in a. Makers of off-brands do not make a distinction sometimes. The M H -a should charge any EN-EL-3 batteries ( note; this battery has been modified over the years I think???) I have a grey one, the new ones are black. If you are completely uncertain then call Nikon USA tech support. I would just go with the MH-25-a. If you travel a lot you might eventually like a spare as backup as technology can fail; I also carry 2 inverters for the car so I can have backup for in car recharging; on a remote trip to Patagonia my inverter failed; since I have a distrust with technology I just switched the bad one with the spare; also extra batteries are wise and do not use off-brand ones as the Nikon batteries are better despite hype you might hear; off-brand chargers are OK; I have both Nikon and off brand chargers with me in my travels. Good luck.

Q: 4. Is this charger a legitimate Nikon-made item? I've heard of knock-offs on Amazon having the Nikon name on them. Thanks.

A: This is an original Nikon product, as B&H is an authorized Nikon dealer.

Q: 5. So as of September of 2023, does this come with the ac prong adapter, line cord, or both?

A: The Nikon MH-25a Battery Charger only includes the AC plug adapter.

Q: 6. Will this charge an EnEl 20a nikon battery?

A: This charger is only for the EN-EL14 or EN-EL14a batteries. A compatible charger for the EN-EL20A is the Watson Compact AC/DC Charger for EN-EL20 or EN-EL20a Battery, BH # WACNIENEL20 http://bhpho.to/2Wxx6uZ

Q: 7. Will this charger work with a 240 v input?

A: 100% YES!! Keep in mind it is not supplied with a cord or plug adapter , but B & H has any variety needed. Go to the MH-25A on their website, then Accessories and you will find a choice of voltage adapters! Best of luck. Oh yes, it's just like the charger supplied with the Nikon D7200 and many other DSLRs.

Q: 8. Will this work with Peak Design arcs plate for capture?

A: Yes it will.

Q: 9. Does this charger still come with an electric cord and built in prongs for wall charging?

A: This charger comes with an electric cord (2-prong) and a separate 2-prong adaptor plug. So, you can use either the electric cord or the adaptor plug ... depending on your preference. Some older home outlets may not support the weight of the adaptor plug and charger. All the best!

Q: 10. How many years does the charger last?

A: Mine lasted over 5 years. I had to buy a new one because I lost the original one I had.