The RF Venue COMBINE8 enables you to actively combine signals from up to eight in-ear monitor (IEM) wireless transmitters into a single transmitting antenna. IEM transmitter combination for multi-channel systems greatly lowers the probability of intermodulation artifacts arising from multiple adjacent transmitters interfering with one another—thus improving audio quality.

The COMBINE8 can be used with any brand of IEM transmitter set to transmit at 50mW or less as well as any type of directional antenna. The rear panel houses eight BNC transmitter-input connectors and one BNC antenna output.

An external DC power supply is included to provide DC power for up to eight IEM transmitters, removing the need for wall warts and reducing clutter.

For your convenience, RF Venue offers the 8-Channel In-Ear Monitor Upgrade Pack, which bundles the COMBINE8 with a CP Beam helical antenna, and a 25" low-loss RG8X coaxial cable.

8 IEM Transmitter Signals into 1 Antenna    Any Brand IEM Transmitter 50mW or Less    Any Type of Directional Antenna    DC Power Supply for 8 Transmitters

Related Questions and Answers

Q: 1. I just got my tripod with this head delivered. The tilt grag only turns about 3/4 turn from max drag to min. drag. When set to minimum drag, the head still bounces back up (with Nitrogen piston at minimum all--about 9 turns on that dial). Is something wrong with my head? Is there someway to get the drag fully loosened? I can't set the camera to not bounce back to level when I let go.

A: You have three adjustments. Two are for resistance which has nothing to do with stability of your camera. Resistance settings are only for resistance during a move. These are pan and tilt. When setting up the camera you should set these as loose as you can get them. Counter Clockwise is more resistance and Clockwise less resistance. The Nitrogen Piston setting is based on the weight of the camera. Again you need to set the Piston setting. Again clockwise tightens and counter clockwise loosens. Whe setting up the camera you need to be as clockwise as possible and then make sure that the camera plate and camera are balanced (not falling forward or backward). Once you have the camera balanced the turn the Nitrogen Piston Knob all the way counter clockwise and then back it off until your camera stablizes its position no mater what angle it is in. Then you can adjust the resistance to your preference. We have a rigging kit with follow focus and barn doors, so we had to add weight to the back of the rig for balancing. Normally you won't need to do this. If you have questions you can give us a call. 720-493-9966. Hope this helps. Bjarne Blume AVCOM Media Production

Q: 2. Is the N8 head compatable with the Manfrotto carbon legs 755CX3? N8 flat plate is 75mm diameter and the legs have a 50mm top plate. N8 will screw on OK, but ....

A: Yes, this head will work with the Manfrotto 755CX3 legs. Those legs have a 3/8"-16 Stud which will allow this head to connect to it.

Q: 3. Can the N8 video head be mounted on tripod with 3/8' screw?

A: Yes, this head will mount on a tripod with a 3/8"-16 Stud. It has a 3/8"-16 Thread.

Q: 4. Where are 608 and 612 made?

A: They are both made in Italy.

Q: 5. Which Plates are compatible besides the 504PLONG? Will they work with my other Manfrotto heads?

A: this is compatible with the Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw

Q: 6. These devices work with Hasselblad H4D?

A: Yes, we suggest the following unit for a better end-user experience. Vello FreeWave Wireless Remote Shutter Release (Canon Sub-Mini Connection) BH #VERWC1 • MFR #RW-C1 https://www.bhphotovideo.com/c/product/749989-REG/Vello_RW_C1_FreeWave_Wireless_Remote_Shutter.html

Q: 7. Is this what I use to connect my Canon V1 Speedlight to the Pluto trigger? My V1 doesn’t have a PC sync port which is needed, right?

A: You don't need a trigger with a PC cord Godox has a Remote trigger for canon B&H # GOX1TC This V1 has a built in receiver for Godox triggers.

Q: 8. What is the height of this head?

A: This head is 5.9" / 15 cm tall.

Q: 9. What is different about this from the Manfrotto Nitrotech N8?

A: The load capacity and many other features are the same as the N8. However this model offers upgraded fluid technology which enables smooth and judder-free pan and tilt movements thanks to a continuously variable drag performance.

Q: 10. Does 055 Manfrotto tripod is compatible with 608 head?

A: Yes, this is compatible with the Manfrotto 055 tripod legs. Both use the 3/8"-16 mount.