Sony Bluetooth Transmitter

Lightpix Labs Flashq X20 With Transmitter For Sony

Product Code: ga204576
Availability: In Stock

$360.00 $460.80

Qty

0 reviews Write a review

Description
Reviews (0)

The compact, lightweight FlashQ x20 with Transmitter for Sony from LightPix Labs is a cost-efficient, Sony ADI / P-TTL-compatible lighting solution with advanced triggering and control features. The lightweight, compact flash easily fits into tight places where larger units can't go. With a guide number of 65, the FlashQ x20 has TTL power selection and runs on two alkaline or rechargeable NiMH batteries, and it will recycle quickly depending on the batteries in use.

One of the flash's clever features is the removeable Sony TTL transmitter that comes with the unit. By detaching the transmitter and mounting the flash head remotely on a light stand, you can adjust power and trigger it from the on-camera transmitter at a distance. In fact, the transmitter can control several x20s simultaneously. Features include 1st and 2nd curtain sync and flash exposure compensation. Perks include a built-in filter holder and tilting capability. Finally, a pleasant surprise is FlashQ x20's LED light, which can be used as a modeling light, or with its high CRI of 95, used as a video light.

Sony ADI / P-TTL Control Wireless Triggering and Power Adjustment Built-In Gel Filter Holder Bi-Color LED Video/Modeling Light 90° Tiltable Flash Head Built-In Gel Filter Holder with 6 Gels S1 and S2 Optical Slave Modes

Key Specs
Guide Number	65.62' / 20 m at ISO 100
Auto Zoom Head	No
Bounce Head	0 to +90°
Swivel Head	No
Exposure Control	Sony ADI / P-TTL
Wireless Operation	Radio (TTL/Manual) Up to 32.8' / 10 m
Internal Power	2x AA (Alkaline, NiMH)
Flash Head
Guide Number	65.62' / 20 m at ISO 100
Coverage	Full-Frame 35 to 35 mm
Auto Zoom Head	No
Bounce Head	0 to +90°
Swivel Head	No
Recycle Time	Approx. 5 Seconds
Secondary Illumination	Video Light
Exposure Control
Exposure Control	Sony ADI / P-TTL
Flash Modes	No
Power Range	No
Flash Compensation	No
Wireless
Wireless Operation	Radio (TTL/Manual) Up to 32.8' / 10 m
Remote Timing Modes	No
Power
Internal Power	2x AA (Alkaline, NiMH)
External Power Pack Compatible	No
General
Mount	Shoe
Mobile App Compatible	No
Dimensions (W x H x D)	2.3 x 4 x 1.2" / 59 x 101 x 30 mm
Weight	4.2 oz / 120 g (with Batteries)
Packaging Info
Package Weight	0.465 lb
Box Dimensions (LxWxH)	4.9 x 4.6 x 1.6"

a7, a7 II, a7 III, a7R II, a7R III, a7R IV, a7s, a7s II, a7s III, a7C, a6000, a6300, a6400, a6500, RX1, RX1R, RX1 R II, RX10, RX10 II, RX10 III, RX10 IV

Guide number 65.62' / 20m (ISO 100 @ 32mm)

Compatible with Sony ADI / P-TTL

Front and rear curtain sync

Wireless TTL, off-camera flash any time with detachable transmitter

Remote control power ratio, video light level

Flash exposure compensation

Tiltable flash head

Built-in color gel holder

LED video light with adjustable color and brightness

FlashQ Transmitter with built-in rechargeable Li-Ion battery

USB charger for transmitter and x20 flash (using optional NiMH batteries)

The x20 functions like a typical on-camera flash while attached to the included shoe-mount FlashQ transmitter. Detaching the flash puts it into wireless, mode allowing it to be used off-camera. Wireless triggering and power level adjustment can then be accomplished via the camera-mounted transmitter

The x20 runs on two AA alkaline batteries or two rechargeable Ni-MH batteries. The transmitter can be conveniently charged via USB

The x20 features an LED light for use as a modeling light or with its CRI of 95, used as a video light

Related Questions and Answers

Q: 1. Will this trigger a camera?

A: The LightPix Labs FlashQ Trigger T2 Kit F+ (Black) BH #LIFQTT2KFBLK is a flash trigger. It is not a shutter release.

Q: 2. Is it safe to use this flash on a Leica Typ 246 Monchrom?

A: The LightPix Labs FlashQ M20 with Transmitter with Exposure Control is a manual flash and should work fine on the Leica Typ 246 Monochrome with out hurting it. Best for full compatibility and TTL is one by Leica like these, https://bhpho.to/418DAk8.

Q: 3. I have a Leica MDA and was wondering if this and the Q20ii would work well on it. I'd like to put the transmitter on the camera and just hand hold the flash while I'm out doing street photography!

A: Yes. Just be mindful that there will be no TTL information transmitted by the FlashQ trigger.

Q: 4. Can I buy a separate trigger to use it also with other cameras?

A: There is the LightPix Labs FlashQ Trigger T2 Kit (Black), BH # LIFQTT2KBLK which can work woth other flashes. https://bhpho.to/3LCXk6o

Q: 5. Is there a way to have two transmitters send the same signal? I have two cameras and one flash.

A: Yes, the LightPix Labs FlashQ Trigger T2 Kit F+ (Black) are manual transmitter and receiver. So you can have more than one work.

Q: 6. will this work with leica cl?

A: Unfortunately LightPix Labs FlashQ x20 with Transmitter for Sony is not compatible with the Leica CL.

Q: 7. Will this trigger work with my Profoto A1x flash?

A: It can work in manual, but you will have no TTL, HSS or ability to control the light from the transmitter.

Q: 8. Will this work on Leica Q and CL?

A: The LightPix Labs FlashQ M20 with Transmitter with Exposure Control for Sony is not compatible with the Leica Q or the Leica CL; it is compatible with Sony cameras with Sony ADI / P-TTL capability.

Q: 9. Does the transmitter have the ability to be used with a sync cable?

A: The transmitter of the LightPix Labs FlashQ M20 with Transmitter with Exposure Control (B&H# LIFQM20M) does not have a built-in sync port for use with cameras not possessing a standard ISO hot shoe with a typical center pin. However, this may be added to it for use plugged into a camera (or medium/large format lens) standard PC sync port: Impact SCS-MPC PC Male to Hot Shoe Sync Cord (12") (B&H# IMSCSMPC) https://tinyurl.com/yc3bv96d

Q: 10. Can it also be used with a sync cable? Is there a flash sync cable port on the flash body and/or on remote?

A: While it will depend on what type flash connection is used by the camera onto which you wish to use the LightPix Labs FlashQ x20 with Transmitter for FUJIFILM, the Impact SCS-MPC PC Male to Hot Shoe Sync Cord (12"), B&H # IMSCSMPC, would be a compatible hot shoe adapter that will allow you to use the flash with cameras that have a PC (X) sync terminal connector. https://bhpho.to/3Vtm7lP

There are no reviews for this product.