Distribute ASI video over your IP network using the H-ASI-IP-B ASI to IP and IP to ASI Bidirectional Converter from Thor. This efficient converter acts as an ASI over IP encapsulator in which the MPEG transport streams are carried through the packet-based network. Converter features include bitrates of up to 80Mb/s, error correction and packet buffering, and full duplex transport in both directions.

MPEG 2 Transport of ASI Video via IP    Up to 80Mb/s Transport via Ethernet    Full Duplex Bidirectional Transport    BNC ASI Input & Output    IP Wrapper: UDP Encapsulation of MPEG-TS    Reliable Error Correction/Packet Buffer    Works Well with Dedicated Connection    Strips Null Packets to Reduce Bandwidth    Front-Panel & Remote Software Management

Transport up to 80 Mb/s MPTS ASI video over Ethernet

Related Questions and Answers

Q: 1. How many camera position presets can be stored?

A: PTZ Optics advertises this as having 100+ presets.

Q: 2. Weather/Dust Sealed?

A: This camera has no weather or dust sealing. It will need a housing to protect it from the elements.

Q: 3. Can you connect this directly to BMD Studio Camera 4K Pro G2? The description only lists 6K Pro.

A: Currently, although you could connect it, the Blackmagic Design 2110 IP Converter 4x12G PWR cannot integrate directly with either the Blackmagic Design Studio Camera 4K Pro or the 6K Pro as the 2110 IP converter has not yet been integrated with these cameras.

Q: 4. Will this unit convert 1080i 50 to 1080p 50?

A: No. It simply maintains whatever format is input and converts to SDI or HDMI.

Q: 5. Is it USB Powered?

A: Yes!

Q: 6. Is this remote cam control Sony SRG300 SE? Thank for info

A: Yes it should control the Sony SRG300 camera. This remote works with Sony VISCA-over-IP Control Protocol.

Q: 7. What is the 10G SFP specs that comes with this ? MM, SM, 850, 1310 etc, what other 10GB SFPs are compatible.

A: We have listed the specs for the SFP included with the Blackmagic Design DeckLink IP HD Optical card below. At this time no other SFP models have been tested and shown as compatible. SFP SPECS: Cisco Compatible SFP-10G-LR Form Factor SFP+ Max Data Rate 10.3125Gbps Wavelength 1310nm Max Cable Distance 10km

Q: 8. WIll the RJ45 act as a control cable as well as the camera feed? If so, how do i get the signal from the controller to my encoder?

A: While this controller does not accept a video signal the cameras it works with usually will be able to send video through IP over the Ethernet cable.

Q: 9. Can I save a zoom IN or OUT as a preset?

A: The presets can set zoom in or zoom out functions as well as positioning.

Q: 10. I'm new to this. How do I hook up more than one camera by using POE. I only see one port on the controller and one the camera. Is there some sort of hub I need to get?

A: The cameras would be connected with a POE powered network switch, such as an Ubiquiti Networks US-8-60W, and the controller will also be connected to the same network switch and that is where the communication between the cameras and the controller will occur. https://www.bhphotovideo.com/c/product/1296866-REG/ubiquiti_networks_us_8_60w_unifi_8_port_gigabit.html